This is the mail archive of the gdb-cvs@sourceware.org mailing list for the GDB project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

[binutils-gdb] Extended-remote exec test


https://sourceware.org/git/gitweb.cgi?p=binutils-gdb.git;h=2fd33e94480fc2c662d1ad28f83e522cc5dbdc2e

commit 2fd33e94480fc2c662d1ad28f83e522cc5dbdc2e
Author: Don Breazeal <donb@codesourcery.com>
Date:   Fri Sep 11 11:06:02 2015 -0700

    Extended-remote exec test
    
    This patch updates several exec-related tests and some of the library
    functions in order to get them running with extended-remote.  There were
    three changes that were required, as follows:
    
    In gdb.base/foll-exec.exp, use 'clean_start' in place of proc 'zap_session'
    to reset the state of the debugger between tests.  This sets 'remote
    exec-file' to execute the correct binary file in each subsequent test.
    
    In gdb.base/pie-execl.exp, there is an expect statement with an expression
    that is used to match output from both gdb and the program under debug.
    For the remote target, this had to be split into two expressions, using
    $inferior_spawn_id to match the output from the program.
    
    Because I had encountered problems with extended-remote exec events in
    non-stop mode in my manual testing, I added non-stop testing to the
    non-ldr-exc-[1234].exp tests.  In order to set non-stop mode for remote
    targets, it is necessary to 'set non-stop on' after gdb has started, but
    before it connects to gdbserver.  This is done using 'save_vars' to set
    non-stop mode in GDBFLAGS, so GDB sets non-stop mode on startup.
    
    gdb/testsuite/ChangeLog:
    
    	* gdb.base/foll-exec.c: Add copyright header.  Fix
    	formatting issues.
    	* gdb.base/foll-exec.exp (zap_session): Delete proc.
    	(do_exec_tests): Use clean_restart in place of zap_session,
    	and for test initialization.  Fix formatting issues.  Use
    	fail in place of perror.
    	* gdb.base/pie-execl.exp (main): Use 'inferior_spawn_id' in
    	an expect statement to match an expression with output from
    	the program under debug.
    	* gdb.threads/non-ldr-exc-1.exp (do_test, main): Add
    	non-stop tests and pass stop mode argument to clean_restart.
    	Use save_vars to enable non-stop in GDBFLAGS.
    	* gdb.threads/non-ldr-exc-2.exp: Likewise.
    	* gdb.threads/non-ldr-exc-3.exp: Likewise.
    	* gdb.threads/non-ldr-exc-4.exp: Likewise.

Diff:
---
 gdb/testsuite/ChangeLog                     | 17 ++++++++
 gdb/testsuite/gdb.base/foll-exec.c          | 44 ++++++++++++-------
 gdb/testsuite/gdb.base/foll-exec.exp        | 65 +++++++----------------------
 gdb/testsuite/gdb.base/foll-vfork.exp       | 29 ++++++-------
 gdb/testsuite/gdb.base/pie-execl.exp        | 24 ++++++++++-
 gdb/testsuite/gdb.threads/non-ldr-exc-1.exp | 24 ++++++++---
 gdb/testsuite/gdb.threads/non-ldr-exc-2.exp | 24 ++++++++---
 gdb/testsuite/gdb.threads/non-ldr-exc-3.exp | 30 ++++++++++---
 gdb/testsuite/gdb.threads/non-ldr-exc-4.exp | 24 ++++++++---
 9 files changed, 178 insertions(+), 103 deletions(-)

diff --git a/gdb/testsuite/ChangeLog b/gdb/testsuite/ChangeLog
index 1538d15..7753bdb 100644
--- a/gdb/testsuite/ChangeLog
+++ b/gdb/testsuite/ChangeLog
@@ -1,3 +1,20 @@
+2015-09-11  Don Breazeal  <donb@codesourcery.com>
+
+	* gdb.base/foll-exec.c: Add copyright header.  Fix
+	formatting issues.
+	* gdb.base/foll-exec.exp (zap_session): Delete proc.
+	(do_exec_tests): Use clean_restart in place of zap_session,
+	and for test initialization.  Fix formatting issues.  Use
+	fail in place of perror.
+	* gdb.base/pie-execl.exp (main): Use 'inferior_spawn_id' in
+	an expect statement to match an expression with output from
+	the program under debug.
+	* gdb.threads/non-ldr-exc-1.exp (do_test, main): Add
+	non-stop tests and use save_vars to enable non-stop in GDBFLAGS.
+	* gdb.threads/non-ldr-exc-2.exp: Likewise.
+	* gdb.threads/non-ldr-exc-3.exp: Likewise.
+	* gdb.threads/non-ldr-exc-4.exp: Likewise.
+
 2015-09-09  Doug Evans  <dje@google.com>
 
 	* gdb.python/py-prettyprint.exp: Check result of run_lang_tests.
diff --git a/gdb/testsuite/gdb.base/foll-exec.c b/gdb/testsuite/gdb.base/foll-exec.c
index 6e302bb..77287a4 100644
--- a/gdb/testsuite/gdb.base/foll-exec.c
+++ b/gdb/testsuite/gdb.base/foll-exec.c
@@ -1,36 +1,52 @@
+/* This test program is part of GDB, the GNU debugger.
+
+   Copyright 1997-2015 Free Software Foundation, Inc.
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 3 of the License, or
+   (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program.  If not, see <http://www.gnu.org/licenses/>.  */
+
 #include <stdio.h>
 #include <stdlib.h>
 #include <unistd.h>
 #include <string.h>
 
-
-int  global_i = 100;
+int global_i = 100;
 
 int main (void)
 {
-  int  local_j = global_i+1;
-  int  local_k = local_j+1;
+  int local_j = global_i + 1;
+  int local_k = local_j + 1;
 
   printf ("foll-exec is about to execlp(execd-prog)...\n");
 
   execlp (BASEDIR "/execd-prog",
-          BASEDIR "/execd-prog",
-          "execlp arg1 from foll-exec",
-          (char *)0);
+	  BASEDIR "/execd-prog",
+	  "execlp arg1 from foll-exec",
+	  (char *) 0);
 
   printf ("foll-exec is about to execl(execd-prog)...\n");
 
   execl (BASEDIR "/execd-prog",	/* tbreak-execl */
-         BASEDIR "/execd-prog",
-         "execl arg1 from foll-exec",
-         "execl arg2 from foll-exec",
-         (char *)0);
+	 BASEDIR "/execd-prog",
+	 "execl arg1 from foll-exec",
+	 "execl arg2 from foll-exec",
+	 (char *) 0);
 
   {
     static char * argv[] = {
-      (char *)BASEDIR "/execd-prog",
-      (char *)"execv arg1 from foll-exec",
-      (char *)0};
+      (char *) BASEDIR "/execd-prog",
+      (char *) "execv arg1 from foll-exec",
+      (char *) 0};
 
     printf ("foll-exec is about to execv(execd-prog)...\n");
 
diff --git a/gdb/testsuite/gdb.base/foll-exec.exp b/gdb/testsuite/gdb.base/foll-exec.exp
index 5bea3ba..0a6347c 100644
--- a/gdb/testsuite/gdb.base/foll-exec.exp
+++ b/gdb/testsuite/gdb.base/foll-exec.exp
@@ -13,6 +13,9 @@
 # You should have received a copy of the GNU General Public License
 # along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
+# This is a test of gdb's ability to follow a process through a
+# Unix exec() system call.
+
 if { [is_remote target] || ![isnative] } then {
     continue
 }
@@ -44,44 +47,14 @@ if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable $com
      return -1
 }
 
-proc zap_session {} {
-   global gdb_prompt
-   global binfile
-
-   send_gdb "kill\n"
-   gdb_expect {
-     -re ".*Kill the program being debugged.*y or n. $" {
-       gdb_test_no_output "y" ""
-       send_gdb "file $binfile\n"
-       gdb_expect {
-         -re ".*Load new symbol table from.*y or n. $" {
-           send_gdb "y\n"
-           gdb_expect {
-             -re "Reading symbols from.*$gdb_prompt $" {}
-             timeout { fail "loading symbols (timeout)"; return }
-           }
-         }
-         -re ".*gdb_prompt $" {}
-         timeout { fail "loading symbols (timeout)"; return }
-       }
-    }
-    -re ".*$gdb_prompt $" {}
-    timeout { fail "killing inferior (timeout)" ; return }
-   }
-}
-
 proc do_exec_tests {} {
+   global binfile srcfile srcfile2 testfile testfile2
    global gdb_prompt
-   global binfile
-   global srcfile
-   global srcfile2
-   global testfile
-   global testfile2
 
    # Start the program running, and stop at main.
    #
    if ![runto_main] then {
-     perror "Couldn't run ${testfile}"
+     fail "Couldn't run ${testfile}"
      return
    }
 
@@ -103,12 +76,12 @@ proc do_exec_tests {} {
      return
    }
 
-   zap_session
+   clean_restart $binfile
 
    # Start the program running, and stop at main.
    #
    if ![runto_main] then {
-     perror "Couldn't run ${testfile}"
+     fail "Couldn't run ${testfile}"
      return
    }
 
@@ -192,12 +165,12 @@ proc do_exec_tests {} {
 
    # Explicitly kill this program, or a subsequent rerun actually runs
    # the exec'd program, not the original program...
-   zap_session
+   clean_restart $binfile
 
    # Start the program running, and stop at main.
    #
    if ![runto_main] then {
-     perror "Couldn't run ${testfile} (2nd try)"
+     fail "Couldn't run ${testfile} (2nd try)"
      return
    }
 
@@ -265,12 +238,12 @@ proc do_exec_tests {} {
 
    # Explicitly kill this program, or a subsequent rerun actually runs
    # the exec'd program, not the original program...
-   zap_session
+   clean_restart $binfile
 
    # Start the program running, and stop at main.
    #
    if ![runto_main] then {
-     perror "Couldn't run ${testfile} (3rd try)"
+     fail "Couldn't run ${testfile} (3rd try)"
      return
    }
 
@@ -326,12 +299,12 @@ proc do_exec_tests {} {
 
    # Explicitly kill this program, or a subsequent rerun actually runs
    # the exec'd program, not the original program...
-   zap_session
+   clean_restart $binfile
 
    # Start the program running, and stop at main.
    #
    if ![runto_main] then {
-     perror "Couldn't run ${testfile} (4th try)"
+     fail "Couldn't run ${testfile} (4th try)"
      return
    }
 
@@ -381,12 +354,12 @@ proc do_exec_tests {} {
 
    # Explicitly kill this program, or a subsequent rerun actually runs
    # the exec'd program, not the original program...
-   zap_session
+   clean_restart $binfile
 
    # Start the program running, and stop at main.
    #
    if ![runto_main] then {
-     perror "Couldn't run ${testfile} (5th try)"
+     fail "Couldn't run ${testfile} (5th try)"
      return
    }
 
@@ -406,14 +379,8 @@ proc do_exec_tests {} {
 # Start with a fresh gdb
 
 gdb_exit
-gdb_start
-gdb_reinitialize_dir $srcdir/$subdir
-gdb_load ${binfile}
-
+clean_restart $binfile
 
-# This is a test of gdb's ability to follow a process through a
-# Unix exec() system call.
-#
 do_exec_tests
 
 return 0
diff --git a/gdb/testsuite/gdb.base/foll-vfork.exp b/gdb/testsuite/gdb.base/foll-vfork.exp
index b94b7ea..78c5cc8 100644
--- a/gdb/testsuite/gdb.base/foll-vfork.exp
+++ b/gdb/testsuite/gdb.base/foll-vfork.exp
@@ -524,23 +524,18 @@ with_test_prefix "check vfork support" {
     check_vfork_catchpoints
 }
 
-# There is no support for exec events in the RSP yet.
-if { ![gdb_is_target_remote] } {
-    # Follow parent and follow child vfork tests with a child that execs.
-    with_test_prefix "exec" {
-	# These are tests of gdb's ability to follow the parent of a Unix
-	# vfork system call.  The child will subsequently call a variant
-	# of the Unix exec system call.
-	do_vfork_and_follow_parent_tests
-
-	# These are tests of gdb's ability to follow the child of a Unix
-	# vfork system call.  The child will subsequently call a variant
-	# of a Unix exec system call.
-	#
-	do_vfork_and_follow_child_tests_exec
-    }
-} else {
-    unsupported "vfork with exec: exec events not supported for remote"
+# Follow parent and follow child vfork tests with a child that execs.
+with_test_prefix "exec" {
+    # These are tests of gdb's ability to follow the parent of a Unix
+    # vfork system call.  The child will subsequently call a variant
+    # of the Unix exec system call.
+    do_vfork_and_follow_parent_tests
+
+    # These are tests of gdb's ability to follow the child of a Unix
+    # vfork system call.  The child will subsequently call a variant
+    # of a Unix exec system call.
+    #
+    do_vfork_and_follow_child_tests_exec
 }
 
 # Switch to test the case of the child exiting.  We can't use
diff --git a/gdb/testsuite/gdb.base/pie-execl.exp b/gdb/testsuite/gdb.base/pie-execl.exp
index 182f96f..51edc82 100644
--- a/gdb/testsuite/gdb.base/pie-execl.exp
+++ b/gdb/testsuite/gdb.base/pie-execl.exp
@@ -16,6 +16,9 @@
 # The problem was due to amd64_skip_prologue attempting to access inferior
 # memory before the PIE (Position Independent Executable) gets relocated.
 
+global inferior_spawn_id
+global gdb_spawn_id
+
 if ![istarget *-linux*] {
     continue
 }
@@ -67,6 +70,7 @@ gdb_test_multiple "p/x &pie_execl_marker" $test {
 verbose -log "addr1 is $addr1"
 
 set test "continue"
+set matches_found 0
 gdb_test_multiple $test $test {
     -re "Error in re-setting breakpoint" {
 	fail $test
@@ -74,8 +78,24 @@ gdb_test_multiple $test $test {
     -re "Cannot access memory" {
 	fail $test
     }
-    -re "pie-execl: re-exec.*executing new program.*\r\nBreakpoint \[0-9\]+,\[^\r\n\]* pie_execl_marker .*\r\n$gdb_prompt $" {
-	pass $test
+    -i "$inferior_spawn_id" -re "pie-execl: re-exec" {
+	# output from inferior
+        incr matches_found
+	if { $matches_found == 2 } {
+	    pass $test
+	} else {
+	    exp_continue
+	}
+    }
+    -i "$gdb_spawn_id"
+    -re "executing new program.*\r\nBreakpoint \[0-9\]+,\[^\r\n\]* pie_execl_marker .*\r\n$gdb_prompt $" {
+	# output from gdb
+        incr matches_found
+	if { $matches_found == 2 } {
+	    pass $test
+	} else {
+	    exp_continue
+	}
     }
 }
 
diff --git a/gdb/testsuite/gdb.threads/non-ldr-exc-1.exp b/gdb/testsuite/gdb.threads/non-ldr-exc-1.exp
index 69e5cc6..d3a9601 100644
--- a/gdb/testsuite/gdb.threads/non-ldr-exc-1.exp
+++ b/gdb/testsuite/gdb.threads/non-ldr-exc-1.exp
@@ -28,11 +28,14 @@ if {[gdb_compile_pthreads "${srcdir}/${subdir}/${srcfile}" "${binfile}" executab
     return -1
 }
 
-proc do_test { lock_sched } {
-    with_test_prefix "lock-sched$lock_sched" {
+proc do_test { lock_sched nonstop } {
+    with_test_prefix "lock-sched=$lock_sched,non-stop=$nonstop" {
 	global executable
 
-	clean_restart ${executable}
+	save_vars { GDBFLAGS } {
+	  append GDBFLAGS " -ex \"set non-stop $nonstop\""
+	  clean_restart ${executable}
+	}
 
 	if ![runto_main] {
 	    return -1
@@ -48,11 +51,22 @@ proc do_test { lock_sched } {
 	    gdb_test_no_output "set scheduler-locking on"
 	}
 
+	if { $nonstop == "on" } {
+	    gdb_test "thread 2" "Switching.*"
+	}
+
 	gdb_test "continue" \
 	    ".*is executing new program.*Breakpoint 1, main.* at .*" \
 	    "continue over exec"
     }
 }
 
-do_test 0
-do_test 1
+foreach nonstop {"on" "off"} {
+  foreach schedlock {"on" "off"} {
+    if {$schedlock == "on" && $nonstop == "on"} {
+      # Schedule locking has no effect in nonstop mode.
+      continue
+    }
+    do_test $schedlock $nonstop
+  }
+}
diff --git a/gdb/testsuite/gdb.threads/non-ldr-exc-2.exp b/gdb/testsuite/gdb.threads/non-ldr-exc-2.exp
index 9386153..8b170ec 100644
--- a/gdb/testsuite/gdb.threads/non-ldr-exc-2.exp
+++ b/gdb/testsuite/gdb.threads/non-ldr-exc-2.exp
@@ -29,11 +29,14 @@ if {[gdb_compile_pthreads "${srcdir}/${subdir}/${srcfile}" "${binfile}" executab
     return -1
 }
 
-proc do_test { lock_sched } {
-    with_test_prefix "lock-sched$lock_sched" {
+proc do_test { lock_sched nonstop } {
+    with_test_prefix "lock-sched=$lock_sched,non-stop=$nonstop" {
 	global executable
 
-	clean_restart ${executable}
+	save_vars { GDBFLAGS } {
+	  append GDBFLAGS " -ex \"set non-stop $nonstop\""
+	  clean_restart ${executable}
+	}
 
 	if ![runto_main] {
 	    return -1
@@ -42,6 +45,10 @@ proc do_test { lock_sched } {
 	gdb_breakpoint [gdb_get_line_number "break-here"]
 	gdb_continue_to_breakpoint "break-here" ".* break-here .*"
 
+	if { $nonstop == "on" } {
+	    gdb_test "thread 2" "Switching.*"
+	}
+
 	gdb_test "info threads" \
 	    "\r\n\[ \t\]*Id\[ \t\]+Target\[ \t\]+Id\[ \t\]+Frame\[ \t\]*\r\n\\* 2 *Thread \[^\r\n\]* at \[^\r\n\]*" \
 	    "single thread left"
@@ -59,5 +66,12 @@ proc do_test { lock_sched } {
     }
 }
 
-do_test 0
-do_test 1
+foreach nonstop {"on" "off"} {
+  foreach schedlock {"on" "off"} {
+    if {$schedlock == "on" && $nonstop == "on"} {
+      # Schedule locking has no effect in nonstop mode.
+      continue
+    }
+    do_test $schedlock $nonstop
+  }
+}
diff --git a/gdb/testsuite/gdb.threads/non-ldr-exc-3.exp b/gdb/testsuite/gdb.threads/non-ldr-exc-3.exp
index cc7da1a..3e7a3a1 100644
--- a/gdb/testsuite/gdb.threads/non-ldr-exc-3.exp
+++ b/gdb/testsuite/gdb.threads/non-ldr-exc-3.exp
@@ -31,18 +31,25 @@ if {[gdb_compile_pthreads "${srcdir}/${subdir}/${srcfile}" "${binfile}" executab
     return -1
 }
 
-proc do_test { lock_sched } {
-    with_test_prefix "lock-sched$lock_sched" {
+proc do_test { lock_sched nonstop } {
+    with_test_prefix "lock-sched=$lock_sched,non-stop=$nonstop" {
 	global executable
 
-	clean_restart ${executable}
+	save_vars { GDBFLAGS } {
+	  append GDBFLAGS " -ex \"set non-stop $nonstop\""
+	  clean_restart ${executable}
+	}
 
 	if ![runto_main] {
 	    return -1
 	}
 
 	gdb_breakpoint [gdb_get_line_number "break-here"]
-	gdb_continue_to_breakpoint "break-here" ".* break-here .*"
+	gdb_test_multiple "continue" "continue to breakpoint" {
+	    -re ".*Breakpoint.*break-here.*" {
+	        pass "continue to breakpoint"
+	    }
+	}
 
 	# Also test with sched-lock to make sure we can follow the
 	# non-leader thread execing even though the main thread wasn't
@@ -51,11 +58,22 @@ proc do_test { lock_sched } {
 	    gdb_test_no_output "set scheduler-locking on"
 	}
 
+	if { $nonstop == "on" } {
+	    gdb_test "thread 2" "Switching.*"
+	}
+
 	gdb_test "continue" \
 	    ".*is executing new program.*Breakpoint 1, main.* at .*" \
 	    "continue over exec"
     }
 }
 
-do_test 0
-do_test 1
+foreach nonstop {"on" "off"} {
+  foreach schedlock {"on" "off"} {
+    if {$schedlock == "on" && $nonstop == "on"} {
+      # Schedule locking has no effect in nonstop mode.
+      continue
+    }
+    do_test $schedlock $nonstop
+  }
+}
diff --git a/gdb/testsuite/gdb.threads/non-ldr-exc-4.exp b/gdb/testsuite/gdb.threads/non-ldr-exc-4.exp
index a89b818..4d7e97a 100644
--- a/gdb/testsuite/gdb.threads/non-ldr-exc-4.exp
+++ b/gdb/testsuite/gdb.threads/non-ldr-exc-4.exp
@@ -30,11 +30,14 @@ if {[gdb_compile_pthreads "${srcdir}/${subdir}/${srcfile}" "${binfile}" executab
     return -1
 }
 
-proc do_test { lock_sched } {
-    with_test_prefix "lock-sched$lock_sched" {
+proc do_test { lock_sched nonstop } {
+    with_test_prefix "lock-sched=$lock_sched,non-stop=$nonstop" {
 	global executable
 
-	clean_restart ${executable}
+	save_vars { GDBFLAGS } {
+	  append GDBFLAGS " -ex \"set non-stop $nonstop\""
+	  clean_restart ${executable}
+	}
 
 	if ![runto_main] {
 	    return -1
@@ -50,11 +53,22 @@ proc do_test { lock_sched } {
 	    gdb_test_no_output "set scheduler-locking on"
 	}
 
+	if { $nonstop == "on" } {
+	    gdb_test "thread 2" "Switching.*"
+	}
+
 	gdb_test "continue" \
 	    ".*is executing new program.*Breakpoint 1, main.* at .*" \
 	    "continue over exec"
     }
 }
 
-do_test 0
-do_test 1
+foreach nonstop {"on" "off"} {
+  foreach schedlock {"on" "off"} {
+    if {$schedlock == "on" && $nonstop == "on"} {
+      # Schedule locking has no effect in nonstop mode.
+      continue
+    }
+    do_test $schedlock $nonstop
+  }
+}


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]