This is the mail archive of the
gdb-cvs@sourceware.org
mailing list for the GDB project.
[binutils-gdb] non-stop-fair-events.exp slower on software single-step && !displ-step targets
- From: Pedro Alves <palves at sourceware dot org>
- To: gdb-cvs at sourceware dot org
- Date: 16 Sep 2015 14:53:36 -0000
- Subject: [binutils-gdb] non-stop-fair-events.exp slower on software single-step && !displ-step targets
https://sourceware.org/git/gitweb.cgi?p=binutils-gdb.git;h=1ed415e2b9b985aac087c35949d0e1e489ab496d
commit 1ed415e2b9b985aac087c35949d0e1e489ab496d
Author: Pedro Alves <palves@redhat.com>
Date: Wed Sep 16 15:51:36 2015 +0100
non-stop-fair-events.exp slower on software single-step && !displ-step targets
On software single-step targets that don't support displaced stepping,
threads keep hitting each other's single-step breakpoints, and then
GDB needs to pause all threads to step past those. The end result is
that progress in the main thread will be slower and it may take a bit
longer for the signal to be queued. This patch bumps the timeout on
such targets.
gdb/testsuite/ChangeLog:
2015-09-16 Pedro Alves <palves@redhat.com>
Sandra Loosemore <sandra@codesourcery.com>
* gdb.threads/non-stop-fair-events.c (timeout): New global.
(SECONDS): Redefine.
(main): Call pthread_kill and alarm early.
* gdb.threads/non-stop-fair-events.exp: Probe displaced stepping
support.
(test): If the target can't hardware step and doesn't support
displaced stepping, increase the timeout.
Diff:
---
gdb/testsuite/ChangeLog | 11 +++
gdb/testsuite/gdb.threads/non-stop-fair-events.c | 9 ++-
gdb/testsuite/gdb.threads/non-stop-fair-events.exp | 94 +++++++++++++++-------
gdb/testsuite/lib/gdb.exp | 20 +++--
4 files changed, 96 insertions(+), 38 deletions(-)
diff --git a/gdb/testsuite/ChangeLog b/gdb/testsuite/ChangeLog
index ca2dfde..2e9a605 100644
--- a/gdb/testsuite/ChangeLog
+++ b/gdb/testsuite/ChangeLog
@@ -1,4 +1,15 @@
2015-09-16 Pedro Alves <palves@redhat.com>
+ Sandra Loosemore <sandra@codesourcery.com>
+
+ * gdb.threads/non-stop-fair-events.c (timeout): New global.
+ (SECONDS): Redefine.
+ (main): Call pthread_kill and alarm early.
+ * gdb.threads/non-stop-fair-events.exp: Probe displaced stepping
+ support.
+ (test): If the target can't hardware step and doesn't support
+ displaced stepping, increase the timeout.
+
+2015-09-16 Pedro Alves <palves@redhat.com>
* gdb.threads/non-stop-fair-events.exp (gdb_test_no_anchor)
(enable_debug): New procedures.
diff --git a/gdb/testsuite/gdb.threads/non-stop-fair-events.c b/gdb/testsuite/gdb.threads/non-stop-fair-events.c
index f82c366..700676b 100644
--- a/gdb/testsuite/gdb.threads/non-stop-fair-events.c
+++ b/gdb/testsuite/gdb.threads/non-stop-fair-events.c
@@ -24,7 +24,9 @@
const int num_threads = NUM_THREADS;
/* Allow for as much timeout as DejaGnu wants, plus a bit of
slack. */
-#define SECONDS (TIMEOUT + 20)
+
+volatile unsigned int timeout = TIMEOUT;
+#define SECONDS (timeout + 20)
pthread_t child_thread[NUM_THREADS];
volatile pthread_t signal_thread;
@@ -69,6 +71,11 @@ main (void)
int res;
int i;
+ /* Call these early so that we're sure their PLTs are quickly
+ resolved now, instead of in the busy threads. */
+ pthread_kill (pthread_self (), 0);
+ alarm (0);
+
signal (SIGUSR1, handler);
for (i = 0; i < NUM_THREADS; i++)
diff --git a/gdb/testsuite/gdb.threads/non-stop-fair-events.exp b/gdb/testsuite/gdb.threads/non-stop-fair-events.exp
index 37f5bcb..27b50c5 100644
--- a/gdb/testsuite/gdb.threads/non-stop-fair-events.exp
+++ b/gdb/testsuite/gdb.threads/non-stop-fair-events.exp
@@ -62,6 +62,21 @@ set NUM_THREADS [get_value "num_threads" "get num_threads"]
# Account for the main thread.
incr NUM_THREADS
+# Probe for displaced stepping support. We're stopped at the main
+# breakpoint. If displaced stepping is supported, we should see
+# related debug output.
+set displaced_stepping_enabled 0
+set msg "check displaced-stepping"
+gdb_test_no_output "set debug displaced 1"
+gdb_test_multiple "next" $msg {
+ -re "displaced pc to.*$gdb_prompt $" {
+ set displaced_stepping_enabled 1
+ }
+ -re ".*$gdb_prompt $" {
+ }
+}
+gdb_test_no_output "set debug displaced 0"
+
# Run threads to their start positions. This prepares for a new test
# sequence.
@@ -127,6 +142,8 @@ proc enable_debug {enable} {
proc test {signal_thread} {
global gdb_prompt
global NUM_THREADS
+ global timeout
+ global displaced_stepping_enabled
with_test_prefix "signal_thread=$signal_thread" {
restart
@@ -152,42 +169,59 @@ proc test {signal_thread} {
enable_debug 1
- set saw_continuing 0
- set test "continue &"
- gdb_test_multiple $test $test {
- -re "Continuing.\r\n" {
- set saw_continuing 1
- exp_continue
- }
- -re "$gdb_prompt " {
- gdb_assert $saw_continuing $test
- }
- -re "infrun:" {
- exp_continue
- }
+ # On software single-step targets that don't support displaced
+ # stepping, threads keep hitting each others' single-step
+ # breakpoints, and then GDB needs to pause all threads to step
+ # past those. The end result is that progress in the main
+ # thread will be slower and it may take a bit longer for the
+ # signal to be queued; bump the timeout.
+ if {!$displaced_stepping_enabled && ![can_hardware_single_step]} {
+ # The more threads we have, the longer it takes.
+ set factor $NUM_THREADS
+ } else {
+ set factor 1
}
-
- set gotit 0
-
- # Wait for all threads to finish their steps, and for the main
- # thread to hit the breakpoint.
- for {set i 1} { $i <= $NUM_THREADS } { incr i } {
- set test "thread $i broke out of loop"
- set gotit 0
- gdb_test_multiple "" $test {
- -re "loop_broke" {
- # The prompt was already matched in the "continue
- # &" test above. We're now consuming asynchronous
- # output that comes after the prompt.
- set gotit 1
- pass $test
+ with_timeout_factor $factor {
+ gdb_test "print timeout = $timeout" " = $timeout" \
+ "set timeout in the inferior"
+
+ set saw_continuing 0
+ set test "continue &"
+ gdb_test_multiple $test $test {
+ -re "Continuing.\r\n" {
+ set saw_continuing 1
+ exp_continue
+ }
+ -re "$gdb_prompt " {
+ gdb_assert $saw_continuing $test
}
-re "infrun:" {
exp_continue
}
}
- if {!$gotit} {
- break
+
+ set gotit 0
+
+ # Wait for all threads to finish their steps, and for the main
+ # thread to hit the breakpoint.
+ for {set i 1} { $i <= $NUM_THREADS } { incr i } {
+ set test "thread $i broke out of loop"
+ set gotit 0
+ gdb_test_multiple "" $test {
+ -re "loop_broke" {
+ # The prompt was already matched in the "continue
+ # &" test above. We're now consuming asynchronous
+ # output that comes after the prompt.
+ set gotit 1
+ pass $test
+ }
+ -re "infrun:" {
+ exp_continue
+ }
+ }
+ if {!$gotit} {
+ break
+ }
}
}
diff --git a/gdb/testsuite/lib/gdb.exp b/gdb/testsuite/lib/gdb.exp
index 56cde7a..9eaf721 100644
--- a/gdb/testsuite/lib/gdb.exp
+++ b/gdb/testsuite/lib/gdb.exp
@@ -2150,15 +2150,10 @@ proc supports_get_siginfo_type {} {
}
}
-# Return 1 if target hardware or OS supports single stepping to signal
-# handler, otherwise, return 0.
+# Return 1 if the target supports hardware single stepping.
-proc can_single_step_to_signal_handler {} {
+proc can_hardware_single_step {} {
- # Targets don't have hardware single step. On these targets, when
- # a signal is delivered during software single step, gdb is unable
- # to determine the next instruction addresses, because start of signal
- # handler is one of them.
if { [istarget "arm*-*-*"] || [istarget "mips*-*-*"]
|| [istarget "tic6x-*-*"] || [istarget "sparc*-*-linux*"]
|| [istarget "nios2-*-*"] } {
@@ -2168,6 +2163,17 @@ proc can_single_step_to_signal_handler {} {
return 1
}
+# Return 1 if target hardware or OS supports single stepping to signal
+# handler, otherwise, return 0.
+
+proc can_single_step_to_signal_handler {} {
+ # Targets don't have hardware single step. On these targets, when
+ # a signal is delivered during software single step, gdb is unable
+ # to determine the next instruction addresses, because start of signal
+ # handler is one of them.
+ return [can_hardware_single_step]
+}
+
# Return 1 if target supports process record, otherwise return 0.
proc supports_process_record {} {