This is the mail archive of the
gdb-cvs@sourceware.org
mailing list for the GDB project.
[binutils-gdb] Fix various bugs in arm_record_exreg_ld_st_insn
- From: Yao Qi <qiyao at sourceware dot org>
- To: gdb-cvs at sourceware dot org
- Date: 26 Feb 2016 15:02:03 -0000
- Subject: [binutils-gdb] Fix various bugs in arm_record_exreg_ld_st_insn
https://sourceware.org/git/gitweb.cgi?p=binutils-gdb.git;h=9fde51ed303ea3ecbaa7c0084ea417e775a5db29
commit 9fde51ed303ea3ecbaa7c0084ea417e775a5db29
Author: Yao Qi <yao.qi@linaro.org>
Date: Fri Feb 26 15:00:36 2016 +0000
Fix various bugs in arm_record_exreg_ld_st_insn
This patch fixes various bugs in arm_record_exreg_ld_st_insn, and use
gdb.reverse/insn-reverse.c to test more arm instructions.
- Set flag SINGLE_REG correctly. In the arch reference manual,
SING_REG is true when the bit 8 of instruction is zero.
- Record the right D registers for instructions changing S registers.
- Fix the order of length and address in record_buf_mem array.
- Shift the offset by 2 instead of by 24.
This patch also fixes one internal error,
(gdb) PASS: gdb.reverse/finish-precsave.exp: BP at end of main
continue^M
Continuing.^M
../../binutils-gdb/gdb/utils.c:1072: internal-error: virtual memory exhausted.^M
A problem internal to GDB has been detected,FAIL: gdb.reverse/finish-precsave.exp: run to end of main (GDB internal error)
gdb:
2016-02-26 Yao Qi <yao.qi@linaro.org>
* arm-tdep.c (arm_record_exreg_ld_st_insn): Set 'single_reg'
per bit 8. Check bit 20 instead of bit 4 for VMOV
instruction. Record D registers for instructions changing
S registers. Change of the order of length and address
in record_buf_mem array.
gdb/testsuite:
2016-02-26 Yao Qi <yao.qi@linaro.org>
* gdb.reverse/insn-reverse.c [__arm__] (ext_reg_load): New.
[__arm__] (ext_reg_mov, ext_reg_push_pop): New.
(testcases): Update.
Diff:
---
gdb/ChangeLog | 8 +++
gdb/arm-tdep.c | 93 ++++++++++++++++++++------------
gdb/testsuite/ChangeLog | 6 +++
gdb/testsuite/gdb.reverse/insn-reverse.c | 43 +++++++++++++++
4 files changed, 115 insertions(+), 35 deletions(-)
diff --git a/gdb/ChangeLog b/gdb/ChangeLog
index 36cbef6..e45b87d 100644
--- a/gdb/ChangeLog
+++ b/gdb/ChangeLog
@@ -1,5 +1,13 @@
2016-02-26 Yao Qi <yao.qi@linaro.org>
+ * arm-tdep.c (arm_record_exreg_ld_st_insn): Set 'single_reg'
+ per bit 8. Check bit 20 instead of bit 4 for VMOV
+ instruction. Record D registers for instructions changing
+ S registers. Change of the order of length and address
+ in record_buf_mem array.
+
+2016-02-26 Yao Qi <yao.qi@linaro.org>
+
* arm-tdep.c (thumb_record_ld_st_reg_offset): Fix the register
number of Rd.
diff --git a/gdb/arm-tdep.c b/gdb/arm-tdep.c
index bd0ee97..2eb7bb1 100644
--- a/gdb/arm-tdep.c
+++ b/gdb/arm-tdep.c
@@ -10909,13 +10909,13 @@ arm_record_exreg_ld_st_insn (insn_decode_record *arm_insn_r)
const int num_regs = gdbarch_num_regs (arm_insn_r->gdbarch);
opcode = bits (arm_insn_r->arm_insn, 20, 24);
- single_reg = bit (arm_insn_r->arm_insn, 8);
+ single_reg = !bit (arm_insn_r->arm_insn, 8);
op_vldm_vstm = opcode & 0x1b;
/* Handle VMOV instructions. */
if ((opcode & 0x1e) == 0x04)
{
- if (bit (arm_insn_r->arm_insn, 4))
+ if (bit (arm_insn_r->arm_insn, 20)) /* to_arm_registers bit 20? */
{
record_buf[0] = bits (arm_insn_r->arm_insn, 12, 15);
record_buf[1] = bits (arm_insn_r->arm_insn, 16, 19);
@@ -10923,18 +10923,29 @@ arm_record_exreg_ld_st_insn (insn_decode_record *arm_insn_r)
}
else
{
- uint8_t reg_m = ((bits (arm_insn_r->arm_insn, 0, 3) << 1)
- | bit (arm_insn_r->arm_insn, 5));
+ uint8_t reg_m = bits (arm_insn_r->arm_insn, 0, 3);
+ uint8_t bit_m = bit (arm_insn_r->arm_insn, 5);
- if (!single_reg)
+ if (single_reg)
{
- record_buf[0] = num_regs + reg_m;
- record_buf[1] = num_regs + reg_m + 1;
- arm_insn_r->reg_rec_count = 2;
+ /* The first S register number m is REG_M:M (M is bit 5),
+ the corresponding D register number is REG_M:M / 2, which
+ is REG_M. */
+ record_buf[arm_insn_r->reg_rec_count++] = ARM_D0_REGNUM + reg_m;
+ /* The second S register number is REG_M:M + 1, the
+ corresponding D register number is (REG_M:M + 1) / 2.
+ IOW, if bit M is 1, the first and second S registers
+ are mapped to different D registers, otherwise, they are
+ in the same D register. */
+ if (bit_m)
+ {
+ record_buf[arm_insn_r->reg_rec_count++]
+ = ARM_D0_REGNUM + reg_m + 1;
+ }
}
else
{
- record_buf[0] = reg_m + ARM_D0_REGNUM;
+ record_buf[0] = ((bit_m << 4) + reg_m + ARM_D0_REGNUM);
arm_insn_r->reg_rec_count = 1;
}
}
@@ -10949,7 +10960,7 @@ arm_record_exreg_ld_st_insn (insn_decode_record *arm_insn_r)
reg_rn = bits (arm_insn_r->arm_insn, 16, 19);
regcache_raw_read_unsigned (reg_cache, reg_rn, &u_regval);
imm_off8 = bits (arm_insn_r->arm_insn, 0, 7);
- imm_off32 = imm_off8 << 24;
+ imm_off32 = imm_off8 << 2;
memory_count = imm_off8;
if (bit (arm_insn_r->arm_insn, 23))
@@ -10965,19 +10976,19 @@ arm_record_exreg_ld_st_insn (insn_decode_record *arm_insn_r)
while (memory_count > 0)
{
- if (!single_reg)
+ if (single_reg)
{
- record_buf_mem[memory_index] = start_address;
- record_buf_mem[memory_index + 1] = 4;
+ record_buf_mem[memory_index] = 4;
+ record_buf_mem[memory_index + 1] = start_address;
start_address = start_address + 4;
memory_index = memory_index + 2;
}
else
{
- record_buf_mem[memory_index] = start_address;
- record_buf_mem[memory_index + 1] = 4;
- record_buf_mem[memory_index + 2] = start_address + 4;
- record_buf_mem[memory_index + 3] = 4;
+ record_buf_mem[memory_index] = 4;
+ record_buf_mem[memory_index + 1] = start_address;
+ record_buf_mem[memory_index + 2] = 4;
+ record_buf_mem[memory_index + 3] = start_address + 4;
start_address = start_address + 8;
memory_index = memory_index + 4;
}
@@ -10991,25 +11002,36 @@ arm_record_exreg_ld_st_insn (insn_decode_record *arm_insn_r)
{
uint32_t reg_count, reg_vd;
uint32_t reg_index = 0;
+ uint32_t bit_d = bit (arm_insn_r->arm_insn, 22);
reg_vd = bits (arm_insn_r->arm_insn, 12, 15);
reg_count = bits (arm_insn_r->arm_insn, 0, 7);
- if (single_reg)
- reg_vd = reg_vd | (bit (arm_insn_r->arm_insn, 22) << 4);
- else
- reg_vd = (reg_vd << 1) | bit (arm_insn_r->arm_insn, 22);
+ /* REG_VD is the first D register number. If the instruction
+ loads memory to S registers (SINGLE_REG is TRUE), the register
+ number is (REG_VD << 1 | bit D), so the corresponding D
+ register number is (REG_VD << 1 | bit D) / 2 = REG_VD. */
+ if (!single_reg)
+ reg_vd = reg_vd | (bit_d << 4);
- if (bit (arm_insn_r->arm_insn, 21))
+ if (bit (arm_insn_r->arm_insn, 21) /* write back */)
record_buf[reg_index++] = bits (arm_insn_r->arm_insn, 16, 19);
- while (reg_count > 0)
+ /* If the instruction loads memory to D register, REG_COUNT should
+ be divided by 2, according to the ARM Architecture Reference
+ Manual. If the instruction loads memory to S register, divide by
+ 2 as well because two S registers are mapped to D register. */
+ reg_count = reg_count / 2;
+ if (single_reg && bit_d)
{
- if (single_reg)
- record_buf[reg_index++] = num_regs + reg_vd + reg_count - 1;
- else
- record_buf[reg_index++] = ARM_D0_REGNUM + reg_vd + reg_count - 1;
+ /* Increase the register count if S register list starts from
+ an odd number (bit d is one). */
+ reg_count++;
+ }
+ while (reg_count > 0)
+ {
+ record_buf[reg_index++] = ARM_D0_REGNUM + reg_vd + reg_count - 1;
reg_count--;
}
arm_insn_r->reg_rec_count = reg_index;
@@ -11023,7 +11045,7 @@ arm_record_exreg_ld_st_insn (insn_decode_record *arm_insn_r)
reg_rn = bits (arm_insn_r->arm_insn, 16, 19);
regcache_raw_read_unsigned (reg_cache, reg_rn, &u_regval);
imm_off8 = bits (arm_insn_r->arm_insn, 0, 7);
- imm_off32 = imm_off8 << 24;
+ imm_off32 = imm_off8 << 2;
if (bit (arm_insn_r->arm_insn, 23))
start_address = u_regval + imm_off32;
@@ -11032,16 +11054,16 @@ arm_record_exreg_ld_st_insn (insn_decode_record *arm_insn_r)
if (single_reg)
{
- record_buf_mem[memory_index] = start_address;
- record_buf_mem[memory_index + 1] = 4;
+ record_buf_mem[memory_index] = 4;
+ record_buf_mem[memory_index + 1] = start_address;
arm_insn_r->mem_rec_count = 1;
}
else
{
- record_buf_mem[memory_index] = start_address;
- record_buf_mem[memory_index + 1] = 4;
- record_buf_mem[memory_index + 2] = start_address + 4;
- record_buf_mem[memory_index + 3] = 4;
+ record_buf_mem[memory_index] = 4;
+ record_buf_mem[memory_index + 1] = start_address;
+ record_buf_mem[memory_index + 2] = 4;
+ record_buf_mem[memory_index + 3] = start_address + 4;
arm_insn_r->mem_rec_count = 2;
}
}
@@ -11058,7 +11080,8 @@ arm_record_exreg_ld_st_insn (insn_decode_record *arm_insn_r)
else
{
reg_vd = (reg_vd << 1) | bit (arm_insn_r->arm_insn, 22);
- record_buf[0] = num_regs + reg_vd;
+ /* Record register D rather than pseudo register S. */
+ record_buf[0] = ARM_D0_REGNUM + reg_vd / 2;
}
arm_insn_r->reg_rec_count = 1;
}
diff --git a/gdb/testsuite/ChangeLog b/gdb/testsuite/ChangeLog
index 060d8d1..23489ae 100644
--- a/gdb/testsuite/ChangeLog
+++ b/gdb/testsuite/ChangeLog
@@ -1,5 +1,11 @@
2016-02-26 Yao Qi <yao.qi@linaro.org>
+ * gdb.reverse/insn-reverse.c [__arm__] (ext_reg_load): New.
+ [__arm__] (ext_reg_mov, ext_reg_push_pop): New.
+ (testcases): Update.
+
+2016-02-26 Yao Qi <yao.qi@linaro.org>
+
* gdb.reverse/aarch64.c: Rename to ...
* gdb.reverse/insn-reverse.c: ... it.
* gdb.reverse/aarch64.exp: Rename to ...
diff --git a/gdb/testsuite/gdb.reverse/insn-reverse.c b/gdb/testsuite/gdb.reverse/insn-reverse.c
index 1bfb8b0..22cd267 100644
--- a/gdb/testsuite/gdb.reverse/insn-reverse.c
+++ b/gdb/testsuite/gdb.reverse/insn-reverse.c
@@ -88,6 +88,45 @@ adv_simd_vect_shift (void)
{
asm ("fcvtzs s0, s0, #1");
}
+#elif (defined __arm__)
+static void
+ext_reg_load (void)
+{
+ char in[8];
+
+ asm ("vldr d0, [%0]" : : "r" (in));
+ asm ("vldr s3, [%0]" : : "r" (in));
+
+ asm ("vldm %0, {d3-d4}" : : "r" (in));
+ asm ("vldm %0, {s9-s11}" : : "r" (in));
+}
+
+static void
+ext_reg_mov (void)
+{
+ int i, j;
+ double d;
+
+ i = 1;
+ j = 2;
+
+ asm ("vmov s4, s5, %0, %1" : "=r" (i), "=r" (j): );
+ asm ("vmov s7, s8, %0, %1" : "=r" (i), "=r" (j): );
+ asm ("vmov %0, %1, s10, s11" : : "r" (i), "r" (j));
+ asm ("vmov %0, %1, s1, s2" : : "r" (i), "r" (j));
+
+ asm ("vmov %P2, %0, %1" : "=r" (i), "=r" (j): "w" (d));
+ asm ("vmov %1, %2, %P0" : "=w" (d) : "r" (i), "r" (j));
+}
+
+static void
+ext_reg_push_pop (void)
+{
+ double d;
+
+ asm ("vpush {%P0}" : : "w" (d));
+ asm ("vpop {%P0}" : : "w" (d));
+}
#endif
typedef void (*testcase_ftype) (void);
@@ -104,6 +143,10 @@ static testcase_ftype testcases[] =
adv_simd_scalar_index,
adv_simd_smlal,
adv_simd_vect_shift,
+#elif (defined __arm__)
+ ext_reg_load,
+ ext_reg_mov,
+ ext_reg_push_pop,
#endif
};