This is the mail archive of the
gdb-patches@sources.redhat.com
mailing list for the GDB project.
Re: [RFA/MI testsuite] Add mi_runto
- From: Keith Seitz <keiths at redhat dot com>
- To: Elena Zannoni <ezannoni at redhat dot com>
- Cc: gdb-patches at sources dot redhat dot com
- Date: Tue, 10 Sep 2002 15:25:22 -0700 (PDT)
- Subject: Re: [RFA/MI testsuite] Add mi_runto
On Tue, 10 Sep 2002, Elena Zannoni wrote:
> Oh ok. mi_run_to executes an inferior that has already started.
> While mi_runto starts it from scratch.
>
> Could we rename mi_run_to to something like mi_execute_to instead?
> It is used only in mi-var-cmd.exp.
Sure.
> And add your paragraph above in mi-support.exp as a comment?
Done.
How's this? (I've run all this on linux native, and it shows no
regressions.)
Keith
testsuite/ChangeLog
2002-09-10 Keith Seitz <keiths@redhat.com>
* lib/mi-support.exp (mi_runto): New proc. Does the same as gdb's
runto proc.
(mi_run_to_main): Use mi_runto.
(mi_execute_to): Renamed from mi_run_to. Changed all callers.
testsuite/gdb.mi/ChangeLog
2002-09-10 Keith Seitz <keiths@redhat.com>
* mi-simplerun.exp (test_controlled_execution): Follow renaming of
mi_run_to to mi_execute_to.
* mi-var-cmd.exp: Likewise.
* mi0-simplerun.exp: Likewise.
* mi0-var-cmd.exp: Likewise.
Patches
Index: testsuite/lib/mi-support.exp
===================================================================
RCS file: /cvs/src/src/gdb/testsuite/lib/mi-support.exp,v
retrieving revision 1.16
diff -p -r1.16 mi-support.exp
*** testsuite/lib/mi-support.exp 10 Sep 2002 22:07:58 -0000 1.16
--- testsuite/lib/mi-support.exp 10 Sep 2002 22:17:52 -0000
*************** proc mi_run_to_main { } {
*** 621,662 ****
return -1
}
- global mi_gdb_prompt
- global hex
- global decimal
global srcdir
global subdir
global binfile
global srcfile
- set test "mi run-to-main"
mi_delete_breakpoints
mi_gdb_reinitialize_dir $srcdir/$subdir
mi_gdb_load ${binfile}
! mi_gdb_test "200-break-insert main" \
! "200\\^done,bkpt=\{number=\"1\",type=\"breakpoint\",disp=\"keep\",enabled=\"y\",addr=\"$hex\",func=\"main\",file=\".*\",line=\"\[0-9\]*\",times=\"0\"\}" \
! "breakpoint at main"
! mi_run_cmd
! gdb_expect {
! -re "000\\*stopped,reason=\"breakpoint-hit\",bkptno=\"1\",thread-id=\"$decimal\",frame=\{addr=\"$hex\",func=\"main\",args=\(\\\[\\\]\|\{\}\),file=\".*\",line=\"\[0-9\]*\"\}\r\n$mi_gdb_prompt$" {
! pass "$test"
! return 0
! }
! -re ".*$mi_gdb_prompt$" {
! fail "$test (2)"
! }
! timeout {
! fail "$test (timeout)"
! return -1
! }
}
}
# Next to the next statement
! # For return values, see mi_run_to_helper
proc mi_next { test } {
return [mi_next_to {.*} {.*} {.*} {.*} $test]
--- 621,687 ----
return -1
}
global srcdir
global subdir
global binfile
global srcfile
mi_delete_breakpoints
mi_gdb_reinitialize_dir $srcdir/$subdir
mi_gdb_load ${binfile}
! mi_runto main
! }
!
! # Just like gdb's "runto" proc, it will run the target to a given
! # function. The big difference here between mi_runto and mi_execute_to
! # is that mi_execute_to must have the inferior running already. This
! # proc will (like gdb's runto) (re)start the inferior, too.
! #
! # FUNC is the linespec of the place to stop (it inserts a breakpoint here).
! # It returns:
! # -1 if test suppressed, failed, timedout
! # 0 if test passed
!
! proc mi_runto {func} {
! global suppress_flag
! if { $suppress_flag } {
! return -1
! }
!
! global mi_gdb_prompt expect_out
! global hex decimal
!
! set test "mi runto $func"
! mi_gdb_test "200-break-insert $func" \
! "200\\^done,bkpt=\{number=\"\[0-9\]+\",type=\"breakpoint\",disp=\"keep\",enabled=\"y\",addr=\"$hex\",func=\"$func\",file=\".*\",line=\"\[0-9\]*\",times=\"0\"\}" \
! "breakpoint at $func"
!
! if {![regexp {number="[0-9]+"} $expect_out(buffer) str]
! || ![scan $str {number="%d"} bkptno]} {
! set bkptno {[0-9]+}
! }
!
! mi_run_cmd
! gdb_expect {
! -re ".*000\\*stopped,reason=\"breakpoint-hit\",bkptno=\"$bkptno\",thread-id=\"$decimal\",frame=\{addr=\"$hex\",func=\"$func\",args=\(\\\[.*\\\]\|\{.*\}\),file=\".*\",line=\"\[0-9\]*\"\}\r\n$mi_gdb_prompt$" {
! pass "$test"
! return 0
! }
! -re ".*$mi_gdb_prompt$" {
! fail "$test (2)"
! }
! timeout {
! fail "$test (timeout)"
! return -1
}
+ }
}
# Next to the next statement
! # For return values, see mi_execute_to_helper
proc mi_next { test } {
return [mi_next_to {.*} {.*} {.*} {.*} $test]
*************** proc mi_next { test } {
*** 664,670 ****
# Step to the next statement
! # For return values, see mi_run_to_helper
proc mi_step { test } {
return [mi_step_to {.*} {.*} {.*} {.*} $test]
--- 689,695 ----
# Step to the next statement
! # For return values, see mi_execute_to_helper
proc mi_step { test } {
return [mi_step_to {.*} {.*} {.*} {.*} $test]
*************** proc mi_step { test } {
*** 676,682 ****
# Can not match -re ".*\r\n${mi_gdb_prompt}", because of false positives
# after the first prompt is printed.
! proc mi_run_to_helper { cmd reason func args file line extra test } {
global suppress_flag
if { $suppress_flag } {
return -1
--- 701,707 ----
# Can not match -re ".*\r\n${mi_gdb_prompt}", because of false positives
# after the first prompt is printed.
! proc mi_execute_to_helper { cmd reason func args file line extra test } {
global suppress_flag
if { $suppress_flag } {
return -1
*************** proc mi_run_to_helper { cmd reason func
*** 705,760 ****
}
}
! proc mi_run_to { cmd reason func args file line extra test } {
! mi_run_to_helper "$cmd" "$reason" "$func" "\\\[$args\\\]" \
"$file" "$line" "$extra" "$test"
}
proc mi_next_to { func args file line test } {
! mi_run_to "exec-next" "end-stepping-range" "$func" "$args" \
"$file" "$line" "" "$test"
}
proc mi_step_to { func args file line test } {
! mi_run_to "exec-step" "end-stepping-range" "$func" "$args" \
"$file" "$line" "" "$test"
}
proc mi_finish_to { func args file line result ret test } {
! mi_run_to "exec-finish" "function-finished" "$func" "$args" \
"$file" "$line" \
",gdb-result-var=\"$result\",return-value=\"$ret\"" \
"$test"
}
proc mi_continue_to { bkptno func args file line test } {
! mi_run_to "exec-continue" "breakpoint-hit\",bkptno=\"$bkptno" \
"$func" "$args" "$file" "$line" "" "$test"
}
! proc mi0_run_to { cmd reason func args file line extra test } {
! mi_run_to_helper "$cmd" "$reason" "$func" "\{$args\}" \
"$file" "$line" "$extra" "$test"
}
proc mi0_next_to { func args file line test } {
! mi0_run_to "exec-next" "end-stepping-range" "$func" "$args" \
"$file" "$line" "" "$test"
}
proc mi0_step_to { func args file line test } {
! mi0_run_to "exec-step" "end-stepping-range" "$func" "$args" \
"$file" "$line" "" "$test"
}
proc mi0_finish_to { func args file line result ret test } {
! mi0_run_to "exec-finish" "function-finished" "$func" "$args" \
"$file" "$line" \
",gdb-result-var=\"$result\",return-value=\"$ret\"" \
"$test"
}
proc mi0_continue_to { bkptno func args file line test } {
! mi0_run_to "exec-continue" "breakpoint-hit\",bkptno=\"$bkptno" \
"$func" "$args" "$file" "$line" "" "$test"
}
--- 730,785 ----
}
}
! proc mi_execute_to { cmd reason func args file line extra test } {
! mi_execute_to_helper "$cmd" "$reason" "$func" "\\\[$args\\\]" \
"$file" "$line" "$extra" "$test"
}
proc mi_next_to { func args file line test } {
! mi_execute_to "exec-next" "end-stepping-range" "$func" "$args" \
"$file" "$line" "" "$test"
}
proc mi_step_to { func args file line test } {
! mi_execute_to "exec-step" "end-stepping-range" "$func" "$args" \
"$file" "$line" "" "$test"
}
proc mi_finish_to { func args file line result ret test } {
! mi_execute_to "exec-finish" "function-finished" "$func" "$args" \
"$file" "$line" \
",gdb-result-var=\"$result\",return-value=\"$ret\"" \
"$test"
}
proc mi_continue_to { bkptno func args file line test } {
! mi_execute_to "exec-continue" "breakpoint-hit\",bkptno=\"$bkptno" \
"$func" "$args" "$file" "$line" "" "$test"
}
! proc mi0_execute_to { cmd reason func args file line extra test } {
! mi_execute_to_helper "$cmd" "$reason" "$func" "\{$args\}" \
"$file" "$line" "$extra" "$test"
}
proc mi0_next_to { func args file line test } {
! mi0_execute_to "exec-next" "end-stepping-range" "$func" "$args" \
"$file" "$line" "" "$test"
}
proc mi0_step_to { func args file line test } {
! mi0_execute_to "exec-step" "end-stepping-range" "$func" "$args" \
"$file" "$line" "" "$test"
}
proc mi0_finish_to { func args file line result ret test } {
! mi0_execute_to "exec-finish" "function-finished" "$func" "$args" \
"$file" "$line" \
",gdb-result-var=\"$result\",return-value=\"$ret\"" \
"$test"
}
proc mi0_continue_to { bkptno func args file line test } {
! mi0_execute_to "exec-continue" "breakpoint-hit\",bkptno=\"$bkptno" \
"$func" "$args" "$file" "$line" "" "$test"
}
Index: testsuite/gdb.mi/mi-simplerun.exp
===================================================================
RCS file: /cvs/src/src/gdb/testsuite/gdb.mi/mi-simplerun.exp,v
retrieving revision 1.9
diff -p -r1.9 mi-simplerun.exp
*** testsuite/gdb.mi/mi-simplerun.exp 11 Nov 2001 20:11:03 -0000 1.9
--- testsuite/gdb.mi/mi-simplerun.exp 10 Sep 2002 22:18:15 -0000
*************** proc test_controlled_execution {} {
*** 140,146 ****
# FIXME: A string argument is not printed right; should be fixed and
# we should look for the right thing here.
! mi_run_to "exec-step 3" "end-stepping-range" "callee4" "" \
"basics.c" "8" "" "step to callee4"
# FIXME: A string argument is not printed right; should be fixed and
--- 140,146 ----
# FIXME: A string argument is not printed right; should be fixed and
# we should look for the right thing here.
! mi_execute_to "exec-step 3" "end-stepping-range" "callee4" "" \
"basics.c" "8" "" "step to callee4"
# FIXME: A string argument is not printed right; should be fixed and
Index: testsuite/gdb.mi/mi-var-cmd.exp
===================================================================
RCS file: /cvs/src/src/gdb/testsuite/gdb.mi/mi-var-cmd.exp,v
retrieving revision 1.9
diff -p -r1.9 mi-var-cmd.exp
*** testsuite/gdb.mi/mi-var-cmd.exp 5 Mar 2002 19:48:17 -0000 1.9
--- testsuite/gdb.mi/mi-var-cmd.exp 10 Sep 2002 22:18:30 -0000
*************** mi_gdb_test "-var-update *" \
*** 227,233 ****
# lsimple.unsigned_integer = 255;
# lsimple.character = 'a';
! mi_run_to "exec-step 9" "end-stepping-range" "do_locals_tests" "" \
"var-cmd.c" "119" "" "step at do_locals_tests (5)"
# Test: c_variable-2.6
--- 227,233 ----
# lsimple.unsigned_integer = 255;
# lsimple.character = 'a';
! mi_execute_to "exec-step 9" "end-stepping-range" "do_locals_tests" "" \
"var-cmd.c" "119" "" "step at do_locals_tests (5)"
# Test: c_variable-2.6
*************** mi_gdb_test "-var-update *" \
*** 243,249 ****
# lpsimple = &lsimple;
# func = nothing;
! mi_run_to "exec-step 4" "end-stepping-range" "do_locals_tests" "" \
"var-cmd.c" "125" "" "step at do_locals_tests (6)"
# Test: c_variable-2.7
--- 243,249 ----
# lpsimple = &lsimple;
# func = nothing;
! mi_execute_to "exec-step 4" "end-stepping-range" "do_locals_tests" "" \
"var-cmd.c" "125" "" "step at do_locals_tests (6)"
# Test: c_variable-2.7
*************** mi_gdb_test "-var-update *" \
*** 262,268 ****
# lsimple.unsigned_integer = 4321;
# lsimple.character = 'b';
! mi_run_to "exec-step 8" "end-stepping-range" "do_locals_tests" "" \
"var-cmd.c" "133" "" "step at do_locals_tests (7)"
# Test: c_variable-2.8
--- 262,268 ----
# lsimple.unsigned_integer = 4321;
# lsimple.character = 'b';
! mi_execute_to "exec-step 8" "end-stepping-range" "do_locals_tests" "" \
"var-cmd.c" "133" "" "step at do_locals_tests (7)"
# Test: c_variable-2.8
Index: testsuite/gdb.mi/mi0-simplerun.exp
===================================================================
RCS file: /cvs/src/src/gdb/testsuite/gdb.mi/mi0-simplerun.exp,v
retrieving revision 1.6
diff -p -r1.6 mi0-simplerun.exp
*** testsuite/gdb.mi/mi0-simplerun.exp 11 Nov 2001 20:11:03 -0000 1.6
--- testsuite/gdb.mi/mi0-simplerun.exp 10 Sep 2002 22:21:40 -0000
*************** proc test_controlled_execution {} {
*** 142,148 ****
# FIXME: A string argument is not printed right; should be fixed and
# we should look for the right thing here.
! mi0_run_to "exec-step 3" "end-stepping-range" "callee4" "" \
"basics.c" "8" "" "step to callee4"
# FIXME: A string argument is not printed right; should be fixed and
--- 142,148 ----
# FIXME: A string argument is not printed right; should be fixed and
# we should look for the right thing here.
! mi0_execute_to "exec-step 3" "end-stepping-range" "callee4" "" \
"basics.c" "8" "" "step to callee4"
# FIXME: A string argument is not printed right; should be fixed and
Index: testsuite/gdb.mi/mi0-var-cmd.exp
===================================================================
RCS file: /cvs/src/src/gdb/testsuite/gdb.mi/mi0-var-cmd.exp,v
retrieving revision 1.7
diff -p -r1.7 mi0-var-cmd.exp
*** testsuite/gdb.mi/mi0-var-cmd.exp 5 Mar 2002 19:48:18 -0000 1.7
--- testsuite/gdb.mi/mi0-var-cmd.exp 10 Sep 2002 22:21:51 -0000
*************** mi_gdb_test "-var-update *" \
*** 227,233 ****
# lsimple.unsigned_integer = 255;
# lsimple.character = 'a';
! mi0_run_to "exec-step 9" "end-stepping-range" "do_locals_tests" "" \
"var-cmd.c" "119" "" "step at do_locals_tests (5)"
# Test: c_variable-2.6
--- 227,233 ----
# lsimple.unsigned_integer = 255;
# lsimple.character = 'a';
! mi0_execute_to "exec-step 9" "end-stepping-range" "do_locals_tests" "" \
"var-cmd.c" "119" "" "step at do_locals_tests (5)"
# Test: c_variable-2.6
*************** mi_gdb_test "-var-update *" \
*** 243,249 ****
# lpsimple = &lsimple;
# func = nothing;
! mi0_run_to "exec-step 4" "end-stepping-range" "do_locals_tests" "" \
"var-cmd.c" "125" "" "step at do_locals_tests (6)"
# Test: c_variable-2.7
--- 243,249 ----
# lpsimple = &lsimple;
# func = nothing;
! mi0_execute_to "exec-step 4" "end-stepping-range" "do_locals_tests" "" \
"var-cmd.c" "125" "" "step at do_locals_tests (6)"
# Test: c_variable-2.7
*************** mi_gdb_test "-var-update *" \
*** 262,268 ****
# lsimple.unsigned_integer = 4321;
# lsimple.character = 'b';
! mi0_run_to "exec-step 8" "end-stepping-range" "do_locals_tests" "" \
"var-cmd.c" "133" "" "step at do_locals_tests (7)"
# Test: c_variable-2.8
--- 262,268 ----
# lsimple.unsigned_integer = 4321;
# lsimple.character = 'b';
! mi0_execute_to "exec-step 8" "end-stepping-range" "do_locals_tests" "" \
"var-cmd.c" "133" "" "step at do_locals_tests (7)"
# Test: c_variable-2.8