This is the mail archive of the
gdb-patches@sources.redhat.com
mailing list for the GDB project.
Re: [RFA/MI testsuite] Add mi_runto
Keith Seitz writes:
> On Tue, 10 Sep 2002, Elena Zannoni wrote:
>
> > Oh ok. mi_run_to executes an inferior that has already started.
> > While mi_runto starts it from scratch.
> >
> > Could we rename mi_run_to to something like mi_execute_to instead?
> > It is used only in mi-var-cmd.exp.
>
> Sure.
>
> > And add your paragraph above in mi-support.exp as a comment?
>
> Done.
>
> How's this? (I've run all this on linux native, and it shows no
> regressions.)
>
Super.
thanks
Elena
> Keith
>
> testsuite/ChangeLog
> 2002-09-10 Keith Seitz <keiths@redhat.com>
>
> * lib/mi-support.exp (mi_runto): New proc. Does the same as gdb's
> runto proc.
> (mi_run_to_main): Use mi_runto.
> (mi_execute_to): Renamed from mi_run_to. Changed all callers.
>
>
> testsuite/gdb.mi/ChangeLog
> 2002-09-10 Keith Seitz <keiths@redhat.com>
>
> * mi-simplerun.exp (test_controlled_execution): Follow renaming of
> mi_run_to to mi_execute_to.
> * mi-var-cmd.exp: Likewise.
> * mi0-simplerun.exp: Likewise.
> * mi0-var-cmd.exp: Likewise.
>
> Patches
> Index: testsuite/lib/mi-support.exp
> ===================================================================
> RCS file: /cvs/src/src/gdb/testsuite/lib/mi-support.exp,v
> retrieving revision 1.16
> diff -p -r1.16 mi-support.exp
> *** testsuite/lib/mi-support.exp 10 Sep 2002 22:07:58 -0000 1.16
> --- testsuite/lib/mi-support.exp 10 Sep 2002 22:17:52 -0000
> *************** proc mi_run_to_main { } {
> *** 621,662 ****
> return -1
> }
>
> - global mi_gdb_prompt
> - global hex
> - global decimal
> global srcdir
> global subdir
> global binfile
> global srcfile
>
> - set test "mi run-to-main"
> mi_delete_breakpoints
> mi_gdb_reinitialize_dir $srcdir/$subdir
> mi_gdb_load ${binfile}
>
> ! mi_gdb_test "200-break-insert main" \
> ! "200\\^done,bkpt=\{number=\"1\",type=\"breakpoint\",disp=\"keep\",enabled=\"y\",addr=\"$hex\",func=\"main\",file=\".*\",line=\"\[0-9\]*\",times=\"0\"\}" \
> ! "breakpoint at main"
>
> ! mi_run_cmd
> ! gdb_expect {
> ! -re "000\\*stopped,reason=\"breakpoint-hit\",bkptno=\"1\",thread-id=\"$decimal\",frame=\{addr=\"$hex\",func=\"main\",args=\(\\\[\\\]\|\{\}\),file=\".*\",line=\"\[0-9\]*\"\}\r\n$mi_gdb_prompt$" {
> ! pass "$test"
> ! return 0
> ! }
> ! -re ".*$mi_gdb_prompt$" {
> ! fail "$test (2)"
> ! }
> ! timeout {
> ! fail "$test (timeout)"
> ! return -1
> ! }
> }
> }
>
>
> # Next to the next statement
> ! # For return values, see mi_run_to_helper
>
> proc mi_next { test } {
> return [mi_next_to {.*} {.*} {.*} {.*} $test]
> --- 621,687 ----
> return -1
> }
>
> global srcdir
> global subdir
> global binfile
> global srcfile
>
> mi_delete_breakpoints
> mi_gdb_reinitialize_dir $srcdir/$subdir
> mi_gdb_load ${binfile}
>
> ! mi_runto main
> ! }
>
> !
> ! # Just like gdb's "runto" proc, it will run the target to a given
> ! # function. The big difference here between mi_runto and mi_execute_to
> ! # is that mi_execute_to must have the inferior running already. This
> ! # proc will (like gdb's runto) (re)start the inferior, too.
> ! #
> ! # FUNC is the linespec of the place to stop (it inserts a breakpoint here).
> ! # It returns:
> ! # -1 if test suppressed, failed, timedout
> ! # 0 if test passed
> !
> ! proc mi_runto {func} {
> ! global suppress_flag
> ! if { $suppress_flag } {
> ! return -1
> ! }
> !
> ! global mi_gdb_prompt expect_out
> ! global hex decimal
> !
> ! set test "mi runto $func"
> ! mi_gdb_test "200-break-insert $func" \
> ! "200\\^done,bkpt=\{number=\"\[0-9\]+\",type=\"breakpoint\",disp=\"keep\",enabled=\"y\",addr=\"$hex\",func=\"$func\",file=\".*\",line=\"\[0-9\]*\",times=\"0\"\}" \
> ! "breakpoint at $func"
> !
> ! if {![regexp {number="[0-9]+"} $expect_out(buffer) str]
> ! || ![scan $str {number="%d"} bkptno]} {
> ! set bkptno {[0-9]+}
> ! }
> !
> ! mi_run_cmd
> ! gdb_expect {
> ! -re ".*000\\*stopped,reason=\"breakpoint-hit\",bkptno=\"$bkptno\",thread-id=\"$decimal\",frame=\{addr=\"$hex\",func=\"$func\",args=\(\\\[.*\\\]\|\{.*\}\),file=\".*\",line=\"\[0-9\]*\"\}\r\n$mi_gdb_prompt$" {
> ! pass "$test"
> ! return 0
> ! }
> ! -re ".*$mi_gdb_prompt$" {
> ! fail "$test (2)"
> ! }
> ! timeout {
> ! fail "$test (timeout)"
> ! return -1
> }
> + }
> }
>
>
> # Next to the next statement
> ! # For return values, see mi_execute_to_helper
>
> proc mi_next { test } {
> return [mi_next_to {.*} {.*} {.*} {.*} $test]
> *************** proc mi_next { test } {
> *** 664,670 ****
>
>
> # Step to the next statement
> ! # For return values, see mi_run_to_helper
>
> proc mi_step { test } {
> return [mi_step_to {.*} {.*} {.*} {.*} $test]
> --- 689,695 ----
>
>
> # Step to the next statement
> ! # For return values, see mi_execute_to_helper
>
> proc mi_step { test } {
> return [mi_step_to {.*} {.*} {.*} {.*} $test]
> *************** proc mi_step { test } {
> *** 676,682 ****
> # Can not match -re ".*\r\n${mi_gdb_prompt}", because of false positives
> # after the first prompt is printed.
>
> ! proc mi_run_to_helper { cmd reason func args file line extra test } {
> global suppress_flag
> if { $suppress_flag } {
> return -1
> --- 701,707 ----
> # Can not match -re ".*\r\n${mi_gdb_prompt}", because of false positives
> # after the first prompt is printed.
>
> ! proc mi_execute_to_helper { cmd reason func args file line extra test } {
> global suppress_flag
> if { $suppress_flag } {
> return -1
> *************** proc mi_run_to_helper { cmd reason func
> *** 705,760 ****
> }
> }
>
> ! proc mi_run_to { cmd reason func args file line extra test } {
> ! mi_run_to_helper "$cmd" "$reason" "$func" "\\\[$args\\\]" \
> "$file" "$line" "$extra" "$test"
> }
>
> proc mi_next_to { func args file line test } {
> ! mi_run_to "exec-next" "end-stepping-range" "$func" "$args" \
> "$file" "$line" "" "$test"
> }
>
> proc mi_step_to { func args file line test } {
> ! mi_run_to "exec-step" "end-stepping-range" "$func" "$args" \
> "$file" "$line" "" "$test"
> }
>
> proc mi_finish_to { func args file line result ret test } {
> ! mi_run_to "exec-finish" "function-finished" "$func" "$args" \
> "$file" "$line" \
> ",gdb-result-var=\"$result\",return-value=\"$ret\"" \
> "$test"
> }
>
> proc mi_continue_to { bkptno func args file line test } {
> ! mi_run_to "exec-continue" "breakpoint-hit\",bkptno=\"$bkptno" \
> "$func" "$args" "$file" "$line" "" "$test"
> }
>
> ! proc mi0_run_to { cmd reason func args file line extra test } {
> ! mi_run_to_helper "$cmd" "$reason" "$func" "\{$args\}" \
> "$file" "$line" "$extra" "$test"
> }
>
> proc mi0_next_to { func args file line test } {
> ! mi0_run_to "exec-next" "end-stepping-range" "$func" "$args" \
> "$file" "$line" "" "$test"
> }
>
> proc mi0_step_to { func args file line test } {
> ! mi0_run_to "exec-step" "end-stepping-range" "$func" "$args" \
> "$file" "$line" "" "$test"
> }
>
> proc mi0_finish_to { func args file line result ret test } {
> ! mi0_run_to "exec-finish" "function-finished" "$func" "$args" \
> "$file" "$line" \
> ",gdb-result-var=\"$result\",return-value=\"$ret\"" \
> "$test"
> }
>
> proc mi0_continue_to { bkptno func args file line test } {
> ! mi0_run_to "exec-continue" "breakpoint-hit\",bkptno=\"$bkptno" \
> "$func" "$args" "$file" "$line" "" "$test"
> }
> --- 730,785 ----
> }
> }
>
> ! proc mi_execute_to { cmd reason func args file line extra test } {
> ! mi_execute_to_helper "$cmd" "$reason" "$func" "\\\[$args\\\]" \
> "$file" "$line" "$extra" "$test"
> }
>
> proc mi_next_to { func args file line test } {
> ! mi_execute_to "exec-next" "end-stepping-range" "$func" "$args" \
> "$file" "$line" "" "$test"
> }
>
> proc mi_step_to { func args file line test } {
> ! mi_execute_to "exec-step" "end-stepping-range" "$func" "$args" \
> "$file" "$line" "" "$test"
> }
>
> proc mi_finish_to { func args file line result ret test } {
> ! mi_execute_to "exec-finish" "function-finished" "$func" "$args" \
> "$file" "$line" \
> ",gdb-result-var=\"$result\",return-value=\"$ret\"" \
> "$test"
> }
>
> proc mi_continue_to { bkptno func args file line test } {
> ! mi_execute_to "exec-continue" "breakpoint-hit\",bkptno=\"$bkptno" \
> "$func" "$args" "$file" "$line" "" "$test"
> }
>
> ! proc mi0_execute_to { cmd reason func args file line extra test } {
> ! mi_execute_to_helper "$cmd" "$reason" "$func" "\{$args\}" \
> "$file" "$line" "$extra" "$test"
> }
>
> proc mi0_next_to { func args file line test } {
> ! mi0_execute_to "exec-next" "end-stepping-range" "$func" "$args" \
> "$file" "$line" "" "$test"
> }
>
> proc mi0_step_to { func args file line test } {
> ! mi0_execute_to "exec-step" "end-stepping-range" "$func" "$args" \
> "$file" "$line" "" "$test"
> }
>
> proc mi0_finish_to { func args file line result ret test } {
> ! mi0_execute_to "exec-finish" "function-finished" "$func" "$args" \
> "$file" "$line" \
> ",gdb-result-var=\"$result\",return-value=\"$ret\"" \
> "$test"
> }
>
> proc mi0_continue_to { bkptno func args file line test } {
> ! mi0_execute_to "exec-continue" "breakpoint-hit\",bkptno=\"$bkptno" \
> "$func" "$args" "$file" "$line" "" "$test"
> }
> Index: testsuite/gdb.mi/mi-simplerun.exp
> ===================================================================
> RCS file: /cvs/src/src/gdb/testsuite/gdb.mi/mi-simplerun.exp,v
> retrieving revision 1.9
> diff -p -r1.9 mi-simplerun.exp
> *** testsuite/gdb.mi/mi-simplerun.exp 11 Nov 2001 20:11:03 -0000 1.9
> --- testsuite/gdb.mi/mi-simplerun.exp 10 Sep 2002 22:18:15 -0000
> *************** proc test_controlled_execution {} {
> *** 140,146 ****
>
> # FIXME: A string argument is not printed right; should be fixed and
> # we should look for the right thing here.
> ! mi_run_to "exec-step 3" "end-stepping-range" "callee4" "" \
> "basics.c" "8" "" "step to callee4"
>
> # FIXME: A string argument is not printed right; should be fixed and
> --- 140,146 ----
>
> # FIXME: A string argument is not printed right; should be fixed and
> # we should look for the right thing here.
> ! mi_execute_to "exec-step 3" "end-stepping-range" "callee4" "" \
> "basics.c" "8" "" "step to callee4"
>
> # FIXME: A string argument is not printed right; should be fixed and
> Index: testsuite/gdb.mi/mi-var-cmd.exp
> ===================================================================
> RCS file: /cvs/src/src/gdb/testsuite/gdb.mi/mi-var-cmd.exp,v
> retrieving revision 1.9
> diff -p -r1.9 mi-var-cmd.exp
> *** testsuite/gdb.mi/mi-var-cmd.exp 5 Mar 2002 19:48:17 -0000 1.9
> --- testsuite/gdb.mi/mi-var-cmd.exp 10 Sep 2002 22:18:30 -0000
> *************** mi_gdb_test "-var-update *" \
> *** 227,233 ****
> # lsimple.unsigned_integer = 255;
> # lsimple.character = 'a';
>
> ! mi_run_to "exec-step 9" "end-stepping-range" "do_locals_tests" "" \
> "var-cmd.c" "119" "" "step at do_locals_tests (5)"
>
> # Test: c_variable-2.6
> --- 227,233 ----
> # lsimple.unsigned_integer = 255;
> # lsimple.character = 'a';
>
> ! mi_execute_to "exec-step 9" "end-stepping-range" "do_locals_tests" "" \
> "var-cmd.c" "119" "" "step at do_locals_tests (5)"
>
> # Test: c_variable-2.6
> *************** mi_gdb_test "-var-update *" \
> *** 243,249 ****
> # lpsimple = &lsimple;
> # func = nothing;
>
> ! mi_run_to "exec-step 4" "end-stepping-range" "do_locals_tests" "" \
> "var-cmd.c" "125" "" "step at do_locals_tests (6)"
>
> # Test: c_variable-2.7
> --- 243,249 ----
> # lpsimple = &lsimple;
> # func = nothing;
>
> ! mi_execute_to "exec-step 4" "end-stepping-range" "do_locals_tests" "" \
> "var-cmd.c" "125" "" "step at do_locals_tests (6)"
>
> # Test: c_variable-2.7
> *************** mi_gdb_test "-var-update *" \
> *** 262,268 ****
> # lsimple.unsigned_integer = 4321;
> # lsimple.character = 'b';
>
> ! mi_run_to "exec-step 8" "end-stepping-range" "do_locals_tests" "" \
> "var-cmd.c" "133" "" "step at do_locals_tests (7)"
>
> # Test: c_variable-2.8
> --- 262,268 ----
> # lsimple.unsigned_integer = 4321;
> # lsimple.character = 'b';
>
> ! mi_execute_to "exec-step 8" "end-stepping-range" "do_locals_tests" "" \
> "var-cmd.c" "133" "" "step at do_locals_tests (7)"
>
> # Test: c_variable-2.8
> Index: testsuite/gdb.mi/mi0-simplerun.exp
> ===================================================================
> RCS file: /cvs/src/src/gdb/testsuite/gdb.mi/mi0-simplerun.exp,v
> retrieving revision 1.6
> diff -p -r1.6 mi0-simplerun.exp
> *** testsuite/gdb.mi/mi0-simplerun.exp 11 Nov 2001 20:11:03 -0000 1.6
> --- testsuite/gdb.mi/mi0-simplerun.exp 10 Sep 2002 22:21:40 -0000
> *************** proc test_controlled_execution {} {
> *** 142,148 ****
>
> # FIXME: A string argument is not printed right; should be fixed and
> # we should look for the right thing here.
> ! mi0_run_to "exec-step 3" "end-stepping-range" "callee4" "" \
> "basics.c" "8" "" "step to callee4"
>
> # FIXME: A string argument is not printed right; should be fixed and
> --- 142,148 ----
>
> # FIXME: A string argument is not printed right; should be fixed and
> # we should look for the right thing here.
> ! mi0_execute_to "exec-step 3" "end-stepping-range" "callee4" "" \
> "basics.c" "8" "" "step to callee4"
>
> # FIXME: A string argument is not printed right; should be fixed and
> Index: testsuite/gdb.mi/mi0-var-cmd.exp
> ===================================================================
> RCS file: /cvs/src/src/gdb/testsuite/gdb.mi/mi0-var-cmd.exp,v
> retrieving revision 1.7
> diff -p -r1.7 mi0-var-cmd.exp
> *** testsuite/gdb.mi/mi0-var-cmd.exp 5 Mar 2002 19:48:18 -0000 1.7
> --- testsuite/gdb.mi/mi0-var-cmd.exp 10 Sep 2002 22:21:51 -0000
> *************** mi_gdb_test "-var-update *" \
> *** 227,233 ****
> # lsimple.unsigned_integer = 255;
> # lsimple.character = 'a';
>
> ! mi0_run_to "exec-step 9" "end-stepping-range" "do_locals_tests" "" \
> "var-cmd.c" "119" "" "step at do_locals_tests (5)"
>
> # Test: c_variable-2.6
> --- 227,233 ----
> # lsimple.unsigned_integer = 255;
> # lsimple.character = 'a';
>
> ! mi0_execute_to "exec-step 9" "end-stepping-range" "do_locals_tests" "" \
> "var-cmd.c" "119" "" "step at do_locals_tests (5)"
>
> # Test: c_variable-2.6
> *************** mi_gdb_test "-var-update *" \
> *** 243,249 ****
> # lpsimple = &lsimple;
> # func = nothing;
>
> ! mi0_run_to "exec-step 4" "end-stepping-range" "do_locals_tests" "" \
> "var-cmd.c" "125" "" "step at do_locals_tests (6)"
>
> # Test: c_variable-2.7
> --- 243,249 ----
> # lpsimple = &lsimple;
> # func = nothing;
>
> ! mi0_execute_to "exec-step 4" "end-stepping-range" "do_locals_tests" "" \
> "var-cmd.c" "125" "" "step at do_locals_tests (6)"
>
> # Test: c_variable-2.7
> *************** mi_gdb_test "-var-update *" \
> *** 262,268 ****
> # lsimple.unsigned_integer = 4321;
> # lsimple.character = 'b';
>
> ! mi0_run_to "exec-step 8" "end-stepping-range" "do_locals_tests" "" \
> "var-cmd.c" "133" "" "step at do_locals_tests (7)"
>
> # Test: c_variable-2.8
> --- 262,268 ----
> # lsimple.unsigned_integer = 4321;
> # lsimple.character = 'b';
>
> ! mi0_execute_to "exec-step 8" "end-stepping-range" "do_locals_tests" "" \
> "var-cmd.c" "133" "" "step at do_locals_tests (7)"
>
> # Test: c_variable-2.8