This is the mail archive of the gdb-patches@sources.redhat.com mailing list for the GDB project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

Re: RFC: Use program_transform_name correctly


Could someone proofread this boring patch very carefully?

gdb/Makefile.in:
2003-10-08  Jim Blandy  <jimb@redhat.com>

	* Makefile.in (CC_FOR_TARGET, CXX_FOR_TARGET, install-only): Use
	program_transform_name properly.
	* nlm/Makefile.in (CC_FOR_TARGET, NLMCONV_FOR_TARGET): Same.

gdb/gdbserver/Makefile.in:
2003-10-08  Jim Blandy  <jimb@redhat.com>

	* Makefile.in (install-only, uninstall): Use
	program_transform_name properly.

gdb/testsuite/Makefile.in:
2003-10-08  Jim Blandy  <jimb@redhat.com>

	* Makefile.in (RUNTEST_FOR_TARGET): Use program_transform_name
	properly.

Index: gdb/Makefile.in
===================================================================
RCS file: /cvs/src/src/gdb/Makefile.in,v
retrieving revision 1.454
diff -c -r1.454 Makefile.in
*** gdb/Makefile.in	8 Oct 2003 02:41:49 -0000	1.454
--- gdb/Makefile.in	8 Oct 2003 19:22:39 -0000
***************
*** 465,471 ****
      if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
        echo $(CC); \
      else \
!       t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
      fi; \
    fi`
  
--- 465,471 ----
      if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
        echo $(CC); \
      else \
!       t='$(program_transform_name)'; echo gcc | sed -e $$t; \
      fi; \
    fi`
  
***************
*** 481,487 ****
      if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
        echo $(CXX); \
      else \
!       t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
      fi; \
    fi`
  
--- 481,487 ----
      if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
        echo $(CXX); \
      else \
!       t='$(program_transform_name)'; echo gcc | sed -e $$t; \
      fi; \
    fi`
  
***************
*** 963,969 ****
  install: all install-only
  install-only: $(CONFIG_INSTALL)
  	transformed_name=`t='$(program_transform_name)'; \
! 			  echo gdb | sed -e "$$t"` ; \
  		if test "x$$transformed_name" = x; then \
  		  transformed_name=gdb ; \
  		else \
--- 963,969 ----
  install: all install-only
  install-only: $(CONFIG_INSTALL)
  	transformed_name=`t='$(program_transform_name)'; \
! 			  echo gdb | sed -e $$t` ; \
  		if test "x$$transformed_name" = x; then \
  		  transformed_name=gdb ; \
  		else \
Index: gdb/gdbserver/Makefile.in
===================================================================
RCS file: /cvs/src/src/gdb/gdbserver/Makefile.in,v
retrieving revision 1.24
diff -c -r1.24 Makefile.in
*** gdb/gdbserver/Makefile.in	8 Aug 2003 17:30:36 -0000	1.24
--- gdb/gdbserver/Makefile.in	8 Oct 2003 19:22:40 -0000
***************
*** 149,155 ****
  # install-only is intended to address that need.
  install: all install-only
  install-only: 
! 	n=`echo gdbserver | sed '$(program_transform_name)'`; \
  	if [ x$$n = x ]; then n=gdbserver; else true; fi; \
  	$(SHELL) $(srcdir)/../../mkinstalldirs $(DESTDIR)$(bindir); \
  	$(INSTALL_PROGRAM) gdbserver $(DESTDIR)$(bindir)/$$n; \
--- 149,155 ----
  # install-only is intended to address that need.
  install: all install-only
  install-only: 
! 	n=`t='$(program_transform_name)'; echo gdbserver | sed $$t`; \
  	if [ x$$n = x ]; then n=gdbserver; else true; fi; \
  	$(SHELL) $(srcdir)/../../mkinstalldirs $(DESTDIR)$(bindir); \
  	$(INSTALL_PROGRAM) gdbserver $(DESTDIR)$(bindir)/$$n; \
***************
*** 157,163 ****
  	$(INSTALL_DATA) $(srcdir)/gdbserver.1 $(DESTDIR)$(man1dir)/$$n.1
  
  uninstall: force
! 	n=`echo gdbserver | sed '$(program_transform_name)'`; \
  	if [ x$$n = x ]; then n=gdbserver; else true; fi; \
  	rm -f $(bindir)/$$n $(DESTDIR)$(man1dir)/$$n.1
  
--- 157,163 ----
  	$(INSTALL_DATA) $(srcdir)/gdbserver.1 $(DESTDIR)$(man1dir)/$$n.1
  
  uninstall: force
! 	n=`t='$(program_transform_name)'; echo gdbserver | sed $$t`; \
  	if [ x$$n = x ]; then n=gdbserver; else true; fi; \
  	rm -f $(bindir)/$$n $(DESTDIR)$(man1dir)/$$n.1
  
Index: gdb/nlm/Makefile.in
===================================================================
RCS file: /cvs/src/src/gdb/nlm/Makefile.in,v
retrieving revision 1.2
diff -c -r1.2 Makefile.in
*** gdb/nlm/Makefile.in	6 Mar 2001 08:21:46 -0000	1.2
--- gdb/nlm/Makefile.in	8 Oct 2003 19:22:40 -0000
***************
*** 55,68 ****
    if [ -f ../../gcc/xgcc ] ; then \
      echo ../../gcc/xgcc -B../../gcc/; \
    else \
!     t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
    fi`
  
  NLMCONV_FOR_TARGET = ` \
    if [ -f ../../binutils/nlmconv ] ; then \
      echo ../../binutils/nlmconv; \
    else \
!     t='$(program_transform_name)'; echo nlmconv | sed -e '' $$t; \
    fi`
  
  # All the includes used for CFLAGS and for lint.
--- 55,68 ----
    if [ -f ../../gcc/xgcc ] ; then \
      echo ../../gcc/xgcc -B../../gcc/; \
    else \
!     t='$(program_transform_name)'; echo gcc | sed -e $$t; \
    fi`
  
  NLMCONV_FOR_TARGET = ` \
    if [ -f ../../binutils/nlmconv ] ; then \
      echo ../../binutils/nlmconv; \
    else \
!     t='$(program_transform_name)'; echo nlmconv | sed -e $$t; \
    fi`
  
  # All the includes used for CFLAGS and for lint.
Index: gdb/testsuite/Makefile.in
===================================================================
RCS file: /cvs/src/src/gdb/testsuite/Makefile.in,v
retrieving revision 1.8
diff -c -r1.8 Makefile.in
*** gdb/testsuite/Makefile.in	23 Aug 2003 03:55:58 -0000	1.8
--- gdb/testsuite/Makefile.in	8 Oct 2003 19:22:48 -0000
***************
*** 53,59 ****
      if [ "$(host_canonical)" = "$(target_canonical)" ]; then \
        echo runtest; \
      else \
!       t='$(program_transform_name)'; echo runtest | sed -e '' $$t; \
      fi; \
    fi`
  
--- 53,59 ----
      if [ "$(host_canonical)" = "$(target_canonical)" ]; then \
        echo runtest; \
      else \
!       t='$(program_transform_name)'; echo runtest | sed -e $$t; \
      fi; \
    fi`
  


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]