This is the mail archive of the gdb-patches@sources.redhat.com mailing list for the GDB project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

[PATCH] remove line numbers from break.exp


yuck, this was not a pleasant change.  I removed the references to
explicit lilne numbers from break.exp, by adding comments to break.c
and using those to find the locations.

i think i got them all.

The numbers in the comments reflect the order in which the breakpoints
are set, not the order of the lines at which they are set. I.e. I went
through break.exp and numbered the locations in sequence. I don't
think this is a problem. 

elena

2003-11-12  Elena Zannoni  <ezannoni@redhat.com>

	* gdb.base/break.c: Add comments to aid finding line numbers for
	breakpoints.  
	* gdb.base/break.exp: Remove all references to explicit line
	numbers.


Index: break.c
===================================================================
RCS file: /cvs/src/src/gdb/testsuite/gdb.base/break.c,v
retrieving revision 1.2
diff -u -p -r1.2 break.c
--- break.c	7 Jan 2002 19:21:26 -0000	1.2
+++ break.c	12 Nov 2003 15:39:47 -0000
@@ -41,14 +41,14 @@ char *arg;
 
 #ifdef PROTOTYPES
 int marker1 (void) { return (0); }
-int marker2 (int a) { return (1); }
+int marker2 (int a) { return (1); } /* set breakpoint 8 here */
 void marker3 (char *a, char *b) {}
-void marker4 (long d) {}
+void marker4 (long d) {} /* set breakpoint 14 here */
 #else
 int marker1 () { return (0); }
-int marker2 (a) int a; { return (1); }
+int marker2 (a) int a; { return (1); } /* set breakpoint 9 here */
 void marker3 (a, b) char *a, *b; {}
-void marker4 (d) long d; {}
+void marker4 (d) long d; {}  /* set breakpoint 13 here */
 #endif
 
 /*
@@ -69,21 +69,21 @@ char *argv[], **envp;
 #endif
 {
 #ifdef usestubs
-    set_debug_traps();
+    set_debug_traps();  /* set breakpoint 5 here */
     breakpoint();
 #endif
-    if (argc == 12345) {  /* an unlikely value < 2^16, in case uninited */
+    if (argc == 12345) {  /* an unlikely value < 2^16, in case uninited */ /* set breakpoint 6 here */
 	fprintf (stderr, "usage:  factorial <number>\n");
 	return 1;
     }
-    printf ("%d\n", factorial (atoi ("6")));
-
-    marker1 ();
+    printf ("%d\n", factorial (atoi ("6")));  /* set breakpoint 1 here */
+    /* set breakpoint 12 here */
+    marker1 ();  /* set breakpoint 11 here */
     marker2 (43);
     marker3 ("stack", "trace");
     marker4 (177601976L);
-    argc = (argc == 12345); /* This is silly, but we can step off of it */
-    return argc;
+    argc = (argc == 12345); /* This is silly, but we can step off of it */ /* set breakpoint 2 here */
+    return argc;  /* set breakpoint 10 here */
 }
 
 #ifdef PROTOTYPES
@@ -93,7 +93,7 @@ int factorial (value)
 int value;
 #endif
 {
-    if (value > 1) {
+  if (value > 1) {  /* set breakpoint 7 here */
 	value *= factorial (value - 1);
     }
     return (value);
@@ -106,7 +106,7 @@ int multi_line_if_conditional (a, b, c)
   int a, b, c;
 #endif
 {
-  if (a
+  if (a    /* set breakpoint 3 here */
       && b
       && c)
     return 0;
@@ -121,7 +121,7 @@ int multi_line_while_conditional (a, b, 
   int a, b, c;
 #endif
 {
-  while (a
+  while (a /* set breakpoint 4 here */
       && b
       && c)
     {
Index: break.exp
===================================================================
RCS file: /cvs/src/src/gdb/testsuite/gdb.base/break.exp,v
retrieving revision 1.17
diff -u -p -r1.17 break.exp
--- break.exp	5 Apr 2003 13:35:25 -0000	1.17
+++ break.exp	12 Nov 2003 15:39:48 -0000
@@ -97,6 +97,9 @@ gdb_test "break $srcfile:factorial" \
     "Breakpoint.*at.* file .*$srcfile, line.*" \
     "breakpoint function in file"
 
+#old line 79
+set bp_location1 [gdb_get_line_number "set breakpoint 1 here"]
+
 #
 # test break at line number
 #
@@ -109,44 +112,51 @@ gdb_test "break $srcfile:factorial" \
 gdb_test "list main" \
     ".*main \\(argc, argv, envp\\).*" \
     "use `list' to establish default source file"
-gdb_test "break 79" \
-    "Breakpoint.*at.* file .*$srcfile, line 79\\." \
+gdb_test "break $bp_location1" \
+    "Breakpoint.*at.* file .*$srcfile, line $bp_location1\\." \
     "breakpoint line number"
 
 #
 # test duplicate breakpoint
 #
-gdb_test "break 79" \
-    "Note: breakpoint \[0-9\]+ also set at pc.*Breakpoint \[0-9\]+ at.* file .*$srcfile, line 79\\." \
+gdb_test "break $bp_location1" \
+    "Note: breakpoint \[0-9\]+ also set at pc.*Breakpoint \[0-9\]+ at.* file .*$srcfile, line $bp_location1\\." \
     "breakpoint duplicate"
 
+set bp_location2 [gdb_get_line_number "set breakpoint 2 here"]
+
 #
 # test break at line number in file
 #
-gdb_test "break $srcfile:85" \
-    "Breakpoint.*at.* file .*$srcfile, line 85\\." \
+gdb_test "break $srcfile:$bp_location2" \
+    "Breakpoint.*at.* file .*$srcfile, line $bp_location2\\." \
     "breakpoint line number in file"
 
+set bp_location3 [gdb_get_line_number "set breakpoint 3 here"]
+set bp_location4 [gdb_get_line_number "set breakpoint 4 here"]
 
 #
 # Test putting a break at the start of a multi-line if conditional.
 # Verify the breakpoint was put at the start of the conditional.
 #
 gdb_test "break multi_line_if_conditional" \
-    "Breakpoint.*at.* file .*$srcfile, line 109\\." \
+    "Breakpoint.*at.* file .*$srcfile, line $bp_location3\\." \
     "breakpoint at start of multi line if conditional"
 
 gdb_test "break multi_line_while_conditional" \
-    "Breakpoint.*at.* file .*$srcfile, line 124\\." \
+    "Breakpoint.*at.* file .*$srcfile, line $bp_location4\\." \
     "breakpoint at start of multi line while conditional"
 
+set bp_location5 [gdb_get_line_number "set breakpoint 5 here"]
+set bp_location6 [gdb_get_line_number "set breakpoint 6 here"]
+
 #
 # check to see what breakpoints are set
 #
 if [target_info exists gdb_stub] {
-    set main_line 72
+    set main_line $bp_location5
 } else {
-    set main_line 75
+    set main_line $bp_location6
 }
 
 if {$hp_aCC_compiler} {
@@ -155,16 +165,20 @@ if {$hp_aCC_compiler} {
     set proto ""
 }
 
+set bp_location7 [gdb_get_line_number "set breakpoint 7 here"]
+set bp_location8 [gdb_get_line_number "set breakpoint 8 here"]
+set bp_location9 [gdb_get_line_number "set breakpoint 9 here"]
+
 gdb_test "info break" \
     "Num Type\[ \]+Disp Enb Address\[ \]+What.*
 \[0-9\]+\[\t \]+breakpoint     keep y.* in main at .*$srcfile:$main_line.*
-\[0-9\]+\[\t \]+breakpoint     keep y.* in marker2 at .*$srcfile:4\[49\].*
-\[0-9\]+\[\t \]+breakpoint     keep y.* in factorial$proto at .*$srcfile:96.*
-\[0-9\]+\[\t \]+breakpoint     keep y.* in main at .*$srcfile:79.*
-\[0-9\]+\[\t \]+breakpoint     keep y.* in main at .*$srcfile:79.*
-\[0-9\]+\[\t \]+breakpoint     keep y.* in main at .*$srcfile:85.*
-\[0-9\]+\[\t \]+breakpoint     keep y.* in multi_line_if_conditional at .*$srcfile:109.*
-\[0-9\]+\[\t \]+breakpoint     keep y.* in multi_line_while_conditional at .*$srcfile:124" \
+\[0-9\]+\[\t \]+breakpoint     keep y.* in marker2 at .*$srcfile:($bp_location8|$bp_location9).*
+\[0-9\]+\[\t \]+breakpoint     keep y.* in factorial$proto at .*$srcfile:$bp_location7.*
+\[0-9\]+\[\t \]+breakpoint     keep y.* in main at .*$srcfile:$bp_location1.*
+\[0-9\]+\[\t \]+breakpoint     keep y.* in main at .*$srcfile:$bp_location1.*
+\[0-9\]+\[\t \]+breakpoint     keep y.* in main at .*$srcfile:$bp_location2.*
+\[0-9\]+\[\t \]+breakpoint     keep y.* in multi_line_if_conditional at .*$srcfile:$bp_location3.*
+\[0-9\]+\[\t \]+breakpoint     keep y.* in multi_line_while_conditional at .*$srcfile:$bp_location4" \
     "breakpoint info"
 
 # FIXME: The rest of this test doesn't work with anything that can't
@@ -191,52 +205,53 @@ if ![target_info exists use_gdb_stub] {
 	send_gdb "y\n"
 	exp_continue
     }
-    -re "Starting program.*Breakpoint \[0-9\]+,.*main .*argc.*argv.* at .*$srcfile:75.*75\[\t \]+if .argc.* \{.*$gdb_prompt $"\
+    -re "Starting program.*Breakpoint \[0-9\]+,.*main .*argc.*argv.* at .*$srcfile:$bp_location6.*$bp_location6\[\t \]+if .argc.* \{.*$gdb_prompt $"\
 	                    { pass "run until function breakpoint" }
     -re ".*$gdb_prompt $"       { fail "run until function breakpoint" }
     timeout	            { fail "run until function breakpoint (timeout)" }
   }
 } else {
     if ![target_info exists gdb_stub] {
-	gdb_test continue ".*Continuing\\..*Breakpoint \[0-9\]+, main \\(argc=.*, argv=.*, envp=.*\\) at .*$srcfile:75.*75\[\t \]+if .argc.*\{.*" "stub continue"
+	gdb_test continue ".*Continuing\\..*Breakpoint \[0-9\]+, main \\(argc=.*, argv=.*, envp=.*\\) at .*$srcfile:$bp_location6.*$bp_location6\[\t \]+if .argc.*\{.*" "stub continue"
     }
 }
 
 #
 # run until the breakpoint at a line number
 #
-gdb_test continue "Continuing\\..*Breakpoint \[0-9\]+, main \\(argc=.*, argv=.*, envp=.*\\) at .*$srcfile:79.*79\[\t \]+printf.*factorial.*" \
+gdb_test continue "Continuing\\..*Breakpoint \[0-9\]+, main \\(argc=.*, argv=.*, envp=.*\\) at .*$srcfile:$bp_location1.*$bp_location1\[\t \]+printf.*factorial.*" \
 			"run until breakpoint set at a line number"
 
 #
 # Run until the breakpoint set in a function in a file
 #
 for {set i 6} {$i >= 1} {incr i -1} {
-	gdb_test continue "Continuing\\..*Breakpoint \[0-9\]+, factorial \\(value=$i\\) at .*$srcfile:96.*96\[\t \]+.*if .value > 1. \{.*" \
+	gdb_test continue "Continuing\\..*Breakpoint \[0-9\]+, factorial \\(value=$i\\) at .*$srcfile:$bp_location7.*$bp_location7\[\t \]+.*if .value > 1. \{.*" \
 			"run until file:function($i) breakpoint"
 }
 
 #
 # Run until the breakpoint set at a quoted function
 #
-gdb_test continue "Continuing\\..*Breakpoint \[0-9\]+, (0x\[0-9a-f\]+ in )?marker2 \\(a=43\\) at .*$srcfile:4\[49\].*" \
+gdb_test continue "Continuing\\..*Breakpoint \[0-9\]+, (0x\[0-9a-f\]+ in )?marker2 \\(a=43\\) at .*$srcfile:($bp_location8|$bp_location9).*" \
 		"run until quoted breakpoint"
 #
 # run until the file:function breakpoint at a line number in a file
 #
-gdb_test continue "Continuing\\..*Breakpoint \[0-9\]+, main \\(argc=.*, argv=.*, envp=.*\\) at .*$srcfile:85.*85\[\t \]+argc = \\(argc == 12345\\);.*" \
+gdb_test continue "Continuing\\..*Breakpoint \[0-9\]+, main \\(argc=.*, argv=.*, envp=.*\\) at .*$srcfile:$bp_location2.*$bp_location2\[\t \]+argc = \\(argc == 12345\\);.*" \
 		"run until file:linenum breakpoint"
 
 # Test break at offset +1
+set bp_location10 [gdb_get_line_number "set breakpoint 10 here"]
 
 gdb_test "break +1" \
-    "Breakpoint.*at.* file .*$srcfile, line 86\\." \
+    "Breakpoint.*at.* file .*$srcfile, line $bp_location10\\." \
     "breakpoint offset +1"
 
 # Check to see if breakpoint is hit when stepped onto
 
 gdb_test "step" \
-    ".*Breakpoint \[0-9\]+, main \\(argc=.*, argv=.*, envp=.*\\) at .*$srcfile:86.*86\[\t \]+return argc;" \
+    ".*Breakpoint \[0-9\]+, main \\(argc=.*, argv=.*, envp=.*\\) at .*$srcfile:$bp_location10.*$bp_location10\[\t \]+return argc;.*breakpoint 10 here.*" \
     "step onto breakpoint"
 
 #
@@ -260,37 +275,38 @@ gdb_test "tbreak $srcfile:factorial" "Br
 #
 # test break at line number
 #
-send_gdb "tbreak 79\n"
+send_gdb "tbreak $bp_location1\n"
 gdb_expect {
-    -re "Breakpoint.*at.* file .*$srcfile, line 79.*$gdb_prompt $" { pass "Temporary breakpoint line number #1" }
+    -re "Breakpoint.*at.* file .*$srcfile, line $bp_location1.*$gdb_prompt $" { pass "Temporary breakpoint line number #1" }
 	-re ".*$gdb_prompt $"   { pass "Temporary breakpoint line number #1" }
 	timeout	    { fail "breakpoint line number #1 (timeout)" }
 }
 
-gdb_test "tbreak 75" "Breakpoint.*at.* file .*$srcfile, line 75.*" "Temporary breakpoint line number #2"
+gdb_test "tbreak $bp_location6" "Breakpoint.*at.* file .*$srcfile, line $bp_location6.*" "Temporary breakpoint line number #2"
 
 #
 # test break at line number in file
 #
-send_gdb "tbreak $srcfile:85\n"
+send_gdb "tbreak $srcfile:$bp_location2\n"
 gdb_expect {
-    -re "Breakpoint.*at.* file .*$srcfile, line 85.*$gdb_prompt $" { pass "Temporary breakpoint line number in file #1" }
+    -re "Breakpoint.*at.* file .*$srcfile, line $bp_location2.*$gdb_prompt $" { pass "Temporary breakpoint line number in file #1" }
 	-re ".*$gdb_prompt $"   { pass "Temporary breakpoint line number in file #1" }
 	timeout	    { fail "Temporary breakpoint line number in file #1 (timeout)" }
 }
 
-gdb_test  "tbreak $srcfile:81" "Breakpoint.*at.* file .*$srcfile, line 81.*" "Temporary breakpoint line number in file #2"
+set bp_location11 [gdb_get_line_number "set breakpoint 11 here"]
+gdb_test  "tbreak $srcfile:$bp_location11" "Breakpoint.*at.* file .*$srcfile, line $bp_location11.*" "Temporary breakpoint line number in file #2"
 
 #
 # check to see what breakpoints are set (temporary this time)
 #
 gdb_test "info break" "Num Type.*Disp Enb Address.*What.*\[\r\n\]
 \[0-9\]+\[\t \]+breakpoint     del.*y.*in main at .*$srcfile:$main_line.*\[\r\n\]
-\[0-9\]+\[\t \]+breakpoint     del.*y.*in factorial$proto at .*$srcfile:96.*\[\r\n\]
-\[0-9\]+\[\t \]+breakpoint     del.*y.*in main at .*$srcfile:79.*\[\r\n\]
-\[0-9\]+\[\t \]+breakpoint     del.*y.*in main at .*$srcfile:75.*\[\r\n\]
-\[0-9\]+\[\t \]+breakpoint     del.*y.*in main at .*$srcfile:85.*\[\r\n\]
-\[0-9\]+\[\t \]+breakpoint     del.*y.*in main at .*$srcfile:81.*" \
+\[0-9\]+\[\t \]+breakpoint     del.*y.*in factorial$proto at .*$srcfile:$bp_location7.*\[\r\n\]
+\[0-9\]+\[\t \]+breakpoint     del.*y.*in main at .*$srcfile:$bp_location1.*\[\r\n\]
+\[0-9\]+\[\t \]+breakpoint     del.*y.*in main at .*$srcfile:$bp_location6.*\[\r\n\]
+\[0-9\]+\[\t \]+breakpoint     del.*y.*in main at .*$srcfile:$bp_location2.*\[\r\n\]
+\[0-9\]+\[\t \]+breakpoint     del.*y.*in main at .*$srcfile:$bp_location11.*" \
     "Temporary breakpoint info"
 
 
@@ -378,7 +394,7 @@ gdb_expect {
 # Run to the desired default location. If not positioned here, the
 # tests below don't work.
 #
-gdb_test "until 79" "main .* at .*:79.*" "until 79"
+gdb_test "until $bp_location1" "main .* at .*:$bp_location1.*" "until $bp_location1"
 
 
 # Verify that GDB allows one to just say "break", which is treated
@@ -427,13 +443,13 @@ gdb_expect {
 #
 if ![runto_main] then { fail "break tests suppressed" }
 
-send_gdb "break 79\n"
+send_gdb "break $bp_location1\n"
 gdb_expect {
-  -re "Breakpoint (\[0-9\]*) at .*, line 79.*$gdb_prompt $"\
-          {pass "set to-be-silent break 79"}
+  -re "Breakpoint (\[0-9\]*) at .*, line $bp_location1.*$gdb_prompt $"\
+          {pass "set to-be-silent break $bp_location1"}
   -re "$gdb_prompt $"\
-          {fail "set to-be-silent break 79"}
-  timeout {fail "(timeout) set to-be-silent break 79"}
+          {fail "set to-be-silent break $bp_location1"}
+  timeout {fail "(timeout) set to-be-silent break $bp_location1"}
 }
 
 send_gdb "commands $expect_out(1,string)\n"
@@ -441,33 +457,33 @@ send_gdb "silent\n"
 send_gdb "end\n"
 gdb_expect {
   -re ".*$gdb_prompt $"\
-          {pass "set silent break 79"}
-  timeout {fail "(timeout) set silent break 79"}
+          {pass "set silent break $bp_location1"}
+  timeout {fail "(timeout) set silent break $bp_location1"}
 }
 
 send_gdb "info break $expect_out(1,string)\n"
 gdb_expect {
-  -re "\[0-9\]*\[ \t\]*breakpoint.*:79\r\n\[ \t\]*silent.*$gdb_prompt $"\
-          {pass "info silent break 79"}
+  -re "\[0-9\]*\[ \t\]*breakpoint.*:$bp_location1\r\n\[ \t\]*silent.*$gdb_prompt $"\
+          {pass "info silent break $bp_location1"}
   -re "$gdb_prompt $"\
-          {fail "info silent break 79"}
-  timeout {fail "(timeout) info silent break 79"}
+          {fail "info silent break $bp_location1"}
+  timeout {fail "(timeout) info silent break $bp_location1"}
 }
 send_gdb "continue\n"
 gdb_expect {
   -re "Continuing.\r\n$gdb_prompt $"\
-          {pass "hit silent break 79"}
+          {pass "hit silent break $bp_location1"}
   -re "$gdb_prompt $"\
-          {fail "hit silent break 79"}
-  timeout {fail "(timeout) hit silent break 79"}
+          {fail "hit silent break $bp_location1"}
+  timeout {fail "(timeout) hit silent break $bp_location1"}
 }
 send_gdb "bt\n"
 gdb_expect {
-  -re "#0  main .* at .*:79.*$gdb_prompt $"\
-          {pass "stopped for silent break 79"}
+  -re "#0  main .* at .*:$bp_location1.*$gdb_prompt $"\
+          {pass "stopped for silent break $bp_location1"}
   -re "$gdb_prompt $"\
-          {fail "stopped for silent break 79"}
-  timeout {fail "(timeout) stopped for silent break 79"}
+          {fail "stopped for silent break $bp_location1"}
+  timeout {fail "(timeout) stopped for silent break $bp_location1"}
 }
 
 # Verify that GDB can at least parse a breakpoint with the
@@ -475,7 +491,8 @@ gdb_expect {
 # thread-specific breakpoint really triggers appropriately.
 # The gdb.threads subdirectory contains tests for that.)
 #
-send_gdb "break 80 thread 999\n"
+set bp_location12 [gdb_get_line_number "set breakpoint 12 here"]
+send_gdb "break $bp_location12 thread 999\n"
 gdb_expect {
   -re "Unknown thread 999.*$gdb_prompt $"\
           {pass "thread-specific breakpoint on non-existent thread disallowed"}
@@ -483,7 +500,7 @@ gdb_expect {
           {fail "thread-specific breakpoint on non-existent thread disallowed"}
   timeout {fail "(timeout) thread-specific breakpoint on non-existent thread disallowed"}
 }
-send_gdb "break 80 thread foo\n"
+send_gdb "break $bp_location12 thread foo\n"
 gdb_expect {
   -re "Junk after thread keyword..*$gdb_prompt $"\
           {pass "thread-specific breakpoint on bogus thread ID disallowed"}
@@ -495,7 +512,7 @@ gdb_expect {
 # Verify that GDB responds gracefully to a breakpoint command with
 # trailing garbage.
 #
-send_gdb "break 80 foo\n"
+send_gdb "break $bp_location12 foo\n"
 gdb_expect {
   -re "Junk at end of arguments..*$gdb_prompt $"\
           {pass "breakpoint with trailing garbage disallowed"}
@@ -542,15 +559,15 @@ gdb_test "clear marker3" {Deleted breakp
 
 # Verify that a breakpoint can be set via a convenience variable.
 #
-send_gdb "set \$foo=81\n"
+send_gdb "set \$foo=$bp_location11\n"
 gdb_expect {
   -re "$gdb_prompt $"\
-          {pass "set convenience variable \$foo to 81"}
-  timeout {fail "(timeout) set convenience variable \$foo to 81"}
+          {pass "set convenience variable \$foo to $bp_location11"}
+  timeout {fail "(timeout) set convenience variable \$foo to $bp_location11"}
 }
 send_gdb "break \$foo\n"
 gdb_expect {
-  -re "Breakpoint (\[0-9\]*) at .*, line 81.*$gdb_prompt $"\
+  -re "Breakpoint (\[0-9\]*) at .*, line $bp_location11.*$gdb_prompt $"\
           {pass "set breakpoint via convenience variable"}
   -re "$gdb_prompt $"\
           {fail "set breakpoint via convenience variable"}
@@ -579,7 +596,7 @@ gdb_expect {
 #
 send_gdb "break marker2\n"
 gdb_expect {
-    -re "Breakpoint (\[0-9\]*) at .*, line 4\[49\].*$gdb_prompt $"\
+    -re "Breakpoint (\[0-9\]*) at .*, line ($bp_location8|$bp_location9).*$gdb_prompt $"\
           {pass "set breakpoint on to-be-called function"}
   -re "$gdb_prompt $"\
           {fail "set breakpoint on to-be-called function"}
@@ -602,9 +619,9 @@ gdb_expect {
 #
 send_gdb "bt\n"
 gdb_expect {
-    -re "#0\[ \t\]*($hex in )?marker2.*:4\[49\]\r\n#1.*_sr4export.*$gdb_prompt $"\
+    -re "#0\[ \t\]*($hex in )?marker2.*:($bp_location8|$bp_location9)\r\n#1.*_sr4export.*$gdb_prompt $"\
             {pass "backtrace while in called function"}
-    -re "#0\[ \t\]*($hex in )?marker2.*:4\[49\]\r\n#1.*function called from gdb.*$gdb_prompt $"\
+    -re "#0\[ \t\]*($hex in )?marker2.*:($bp_location8|$bp_location9)\r\n#1.*function called from gdb.*$gdb_prompt $"\
 	    {pass "backtrace while in called function"}
     -re "$gdb_prompt $"\
             {fail "backtrace while in called function"}
@@ -617,11 +634,11 @@ gdb_expect {
 #
 send_gdb "finish\n"
 gdb_expect {
-    -re "Run till exit from .*marker2.* at .*4\[49\]\r\n.* in _sr4export.*$gdb_prompt $"\
+    -re "Run till exit from .*marker2.* at .*($bp_location8|$bp_location9)\r\n.* in _sr4export.*$gdb_prompt $"\
             {pass "finish from called function"}
-    -re "Run till exit from .*marker2.* at .*4\[49\]\r\n.*function called from gdb.*$gdb_prompt $"\
+    -re "Run till exit from .*marker2.* at .*($bp_location8|$bp_location9)\r\n.*function called from gdb.*$gdb_prompt $"\
             {pass "finish from called function"}
-    -re "Run till exit from .*marker2.* at .*4\[49\]\r\n.*Value returned.*$gdb_prompt $"\
+    -re "Run till exit from .*marker2.* at .*($bp_location8|$bp_location9)\r\n.*Value returned.*$gdb_prompt $"\
             {pass "finish from called function"}
     -re "$gdb_prompt $"\
             {fail "finish from called function"}
@@ -880,7 +897,7 @@ if ![target_info exists use_gdb_stub] {
 	send_gdb "y\n"
 	exp_continue
     }
-    -re "Starting program.*Breakpoint \[0-9\]+,.*main .*argc.*argv.* at .*$srcfile:75.*75\[\t \]+if .argc.* \{.*$gdb_prompt $"\
+    -re "Starting program.*Breakpoint \[0-9\]+,.*main .*argc.*argv.* at .*$srcfile:$bp_location6.*$bp_location6\[\t \]+if .argc.* \{.*$gdb_prompt $"\
 	                    { pass "run until function breakpoint, optimized file" }
     -re "Starting program.*Breakpoint \[0-9\]+,.*main .*argc.*argv.* at .*$gdb_prompt $"\
 	                    { pass "run until function breakpoint, optimized file (code motion)" }
@@ -889,7 +906,7 @@ if ![target_info exists use_gdb_stub] {
   }
 } else {
     if ![target_info exists gdb_stub] {
-	gdb_test continue ".*Continuing\\..*Breakpoint \[0-9\]+, main \\(argc=.*, argv=.*, envp=.*\\) at .*$srcfile:75.*75\[\t \]+if .argc.*\{.*" "stub continue, optimized file"
+	gdb_test continue ".*Continuing\\..*Breakpoint \[0-9\]+, main \\(argc=.*, argv=.*, envp=.*\\) at .*$srcfile:$bp_location6.*$bp_location6\[\t \]+if .argc.*\{.*" "stub continue, optimized file"
     }
 }
 
@@ -906,17 +923,19 @@ if ![target_info exists use_gdb_stub] {
 # has no exactly matching line symbol, and GDB reports the breakpoint
 # as if it were in the middle of a line rather than at the beginning.
 
+set bp_location13 [gdb_get_line_number "set breakpoint 13 here"]
+set bp_location14 [gdb_get_line_number "set breakpoint 14 here"]
 send_gdb "continue\n"
 gdb_expect {
-    -re "Breakpoint $decimal, marker4 \\(d=177601976\\) at .*$srcfile:51\[\r\n\]+51\[\t \]+void marker4.*" {
+    -re "Breakpoint $decimal, marker4 \\(d=177601976\\) at .*$srcfile:$bp_location13\[\r\n\]+$bp_location13\[\t \]+void marker4.*" {
 	pass "run until breakpoint set at small function, optimized file"
     }
-    -re "Breakpoint $decimal, $hex in marker4 \\(d=177601976\\) at .*$srcfile:51\[\r\n\]+51\[\t \]+void marker4.*" {
+    -re "Breakpoint $decimal, $hex in marker4 \\(d=177601976\\) at .*$srcfile:$bp_location13\[\r\n\]+$bp_location13\[\t \]+void marker4.*" {
 	pass "run until breakpoint set at small function, optimized file"
     }
-    -re "Breakpoint $decimal, marker4 \\(d=177601976\\) at .*$srcfile:46\[\r\n\]+46\[\t \]+void marker4.*" {
+    -re "Breakpoint $decimal, marker4 \\(d=177601976\\) at .*$srcfile:$bp_location14\[\r\n\]+$bp_location14\[\t \]+void marker4.*" {
         # marker4() is defined at line 46 when compiled with -DPROTOTYPES
-	pass "run until breakpoint set at small function, optimized file (line 46)"
+	pass "run until breakpoint set at small function, optimized file (line $bp_location14)"
     }
     -re ".*$gdb_prompt " {
 	fail "run until breakpoint set at small function, optimized file"


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]