This is the mail archive of the gdb-patches@sourceware.org mailing list for the GDB project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

Re: [patch] Support inferior events in python


The attached patch incorporates fixes requested by Jan, Joel, and Pedro:

 - Use gdb_test_multiple.
 - Check the return value of gdb_compile_pthreads.
 - Remove incorrect comment about pretty printing.
 - Test that non-stop is supported.
 - Fix test intermittent failure on i386.

Where applicable these fixes were also applied to other related tests.

Sami
Fix non-stop Python event tests.

2011-02-14  Sami Wagiaalla  <swagiaal@redhat.com>

	* gdb.python/py-evsignal.exp: New file.
	* gdb.python/py-evthreads.cc: Initialize bad pointer
	to NULL.
	* gdb.python/py-events.exp: Remove pretty printing
	comment.
	* gdb.python/py-evthreads.exp: Ditto.
	Use gdb_test_multiple.

diff --git a/gdb/testsuite/gdb.python/py-events.exp b/gdb/testsuite/gdb.python/py-events.exp
index e5d6daf..8493809 100644
--- a/gdb/testsuite/gdb.python/py-events.exp
+++ b/gdb/testsuite/gdb.python/py-events.exp
@@ -13,11 +13,6 @@
 # You should have received a copy of the GNU General Public License
 # along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
-# This file is part of the GDB testsuite.  It tests Python-based
-# pretty-printing for the CLI.
-
-# Skip all tests if Python scripting is not enabled.
-
 if $tracelevel then {
     strace $tracelevel
 }
diff --git a/gdb/testsuite/gdb.python/py-evsignal.exp b/gdb/testsuite/gdb.python/py-evsignal.exp
new file mode 100644
index 0000000..ae67a12
--- /dev/null
+++ b/gdb/testsuite/gdb.python/py-evsignal.exp
@@ -0,0 +1,49 @@
+# Copyright (C) 2010, 2011 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+if $tracelevel then {
+    strace $tracelevel
+}
+
+load_lib gdb-python.exp
+
+set testfile "py-evthreads"
+set srcfile ${testfile}.c
+set binfile ${objdir}/${subdir}/${testfile}
+set pyfile ${srcdir}/${subdir}/py-events.py
+
+if {[gdb_compile_pthreads "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
+    return -1
+}
+clean_restart $testfile
+
+if { [skip_python_tests] } { continue }
+
+gdb_test_no_output "python execfile ('${pyfile}')" ""
+
+gdb_test "Test_Events" "Event testers registered."
+gdb_test_no_output "set non-stop on"
+gdb_test_no_output "set target-async on"
+
+gdb_breakpoint [gdb_get_line_number "end of main"]
+
+gdb_test_multiple "run" "Signal Thread 3"  {
+    -re ".*stop reason: signal.*stop signal: SIGSEGV.*thread num: 3.*" {
+        pass "thread 3 was signaled"
+    }
+    -re "The target does not support running in non-stop mode"  {
+        unsupported "non-stop mode is unsupported"
+    }
+}
diff --git a/gdb/testsuite/gdb.python/py-evthreads.c b/gdb/testsuite/gdb.python/py-evthreads.c
index 1464ce6..55414ed 100644
--- a/gdb/testsuite/gdb.python/py-evthreads.c
+++ b/gdb/testsuite/gdb.python/py-evthreads.c
@@ -28,7 +28,7 @@ void* thread3 (void* d)
   int count3 = 0;
   count3++;
 
-  int *bad;
+  int *bad = NULL;
   *bad = 1;
 
   return NULL;
@@ -46,10 +46,10 @@ int main (){
   pthread_create (&thread2_id, NULL, thread2, NULL);
   pthread_create (&thread3_id, NULL, thread3, NULL);
 
-  int count1 = 0; // stop1
+  int count1 = 0;
   count1++;
 
   pthread_join (thread2_id, NULL);
   pthread_join (thread3_id, NULL);
-  return 12;
+  return 12; // end of main
 }
diff --git a/gdb/testsuite/gdb.python/py-evthreads.exp b/gdb/testsuite/gdb.python/py-evthreads.exp
index 6ea7eb4..aadacd0 100644
--- a/gdb/testsuite/gdb.python/py-evthreads.exp
+++ b/gdb/testsuite/gdb.python/py-evthreads.exp
@@ -13,11 +13,6 @@
 # You should have received a copy of the GNU General Public License
 # along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
-# This file is part of the GDB testsuite.  It tests Python-based
-# pretty-printing for the CLI.
-
-# Skip all tests if Python scripting is not enabled.
-
 if $tracelevel then {
     strace $tracelevel
 }
@@ -29,7 +24,9 @@ set srcfile ${testfile}.c
 set binfile ${objdir}/${subdir}/${testfile}
 set pyfile ${srcdir}/${subdir}/py-events.py
 
-gdb_compile_pthreads "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug nowarnings}
+if {[gdb_compile_pthreads "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
+    return -1
+}
 clean_restart $testfile
 
 if { [skip_python_tests] } { continue }
@@ -44,76 +41,38 @@ gdb_breakpoint "main"
 gdb_breakpoint "thread2"
 gdb_breakpoint "thread3"
 
-send_gdb "run\n"
-gdb_expect {
-    -re "event type: stop.*
-.*stop reason: breakpoint.*
-.*breakpoint number: 1.*
-.*thread num: 1.*" {
+gdb_test_multiple "run" "Run to breakpoint 1" {
+    -re "event type: stop.*stop reason: breakpoint.*breakpoint number: 1.*thread num: 1.*" {
         pass "reached breakpoint 1"
     }
-    timeout {
-	    fail "did not reach breakpoint 1"
-	}
+    -re "The target does not support running in non-stop mode"  {
+        unsupported "non-stop mode is unsupported"
+        return
+    }
 }
 
-send_gdb "next\n"
-gdb_expect {
-    -re "event type: stop.*
-.*stop reason: breakpoint.*
-.*breakpoint number: 2.*
-.*thread num: 2.*" {
+gdb_test_multiple "next" "Run to breakpoint 2" {
+    -re "event type: stop.*stop reason: breakpoint.*breakpoint number: 2.*thread num: 2.*" {
         pass "reached breakpoint 2"
     }
-    timeout {
-	    fail "did not reach breakpoint 2"
-	}
 }
 
-send_gdb "next\n"
-gdb_expect {
-    -re "event type: stop.*
-.*stop reason: breakpoint.*
-.*breakpoint number: 3.*
-.*thread num: 3.*" {
+gdb_test_multiple "next" "Run to breakpoint 3" {
+    -re "event type: stop.*stop reason: breakpoint.*breakpoint number: 3.*thread num: 3.*" {
         pass "reached breakpoint 3"
     }
-    timeout {
-	    fail "did not reach breakpoint 3"
-	}
 }
 
-send_gdb "continue&\n"
-gdb_expect {
-    -re ".*event type: continue.*
-.*thread num: 1.*" {
+gdb_test_multiple "continue&" "Continue thread 1" {
+    -re ".*event type: continue.*thread num: 1.*" {
         pass "continue thread 1"
     }
-    timeout {
-	    fail "continue thread 1 failed"
-	}
 }
 
 gdb_test "thread 2" ".*Switching to thread 2.*"
-send_gdb "continue&\n"
-gdb_expect {
-    -re ".*event type: continue.*
-.*thread num: 2.*" {
-        pass "continue thread 2"
-    }
-    timeout {
-	    fail "continue thread 2 failed"
-	}
-}
 
-send_gdb "continue -a\n"
-gdb_expect {
-    -re ".*stop reason: signal.*
-.*stop signal: SIGSEGV.*
-.*thread num: 3.*" {
-        pass "thread 3 was signalled"
+gdb_test_multiple "continue&" "Continue thread 2" {
+    -re ".*event type: continue.*thread num: 2.*" {
+        pass "continue thread 1"
     }
-    timeout {
-	    fail "thread 3 was not signalled"
-	}
 }

Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]