This is the mail archive of the gdb-patches@sourceware.org mailing list for the GDB project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

Re: [patch 1/2] Fixes to gdb.base/dump.exp: get value from address instead of name


On 06/22/2011 11:44 PM, Tom Tromey wrote:
>>>>>> "Yao" == Yao Qi <yao@codesourcery.com> writes:

> 
> Yao> +proc capture_value_with_type { expression } {
> 
> I don't fully understand this proc.  Some comments would help.
> 

Sorry about that.  Some comments are added in new patch.

> Yao> +	    if [regexp { \(.*\).*[0-9]+} $expect_out(0,string) output_string] {
> 
> Is [0-9]+ really correct?
> I would have thought the results would be in hex.

Oh, you are right.  Fixed.

> This would be a good spot for a comment describing the expected output.
> 

Comment is added.

> Yao> +		pass "$test $output_string"
> Yao> +	    } else {
> Yao> +		fail "$test unable to match regexp"
> Yao> +	    }
> 
> Passes and fails should use the same text.

Fixed.

patch 2/2 is unchanged.

-- 
Yao (éå)
	gdb/testsuite/
	* gdb.base/dump.exp (capture_pointer_with_type): New.
	Get value from address instead of name.

---
 gdb/testsuite/gdb.base/dump.exp |   55 ++++++++++++++++++++++++++++++--------
 1 files changed, 43 insertions(+), 12 deletions(-)

diff --git a/gdb/testsuite/gdb.base/dump.exp b/gdb/testsuite/gdb.base/dump.exp
index 1f307f4..15bb249 100644
--- a/gdb/testsuite/gdb.base/dump.exp
+++ b/gdb/testsuite/gdb.base/dump.exp
@@ -152,6 +152,34 @@ proc capture_value { expression args } {
     return $output_string
 }
 
+# POINTER is a pointer and this proc captures the value of POINTER along
+# with POINTER's type.  For example, POINTER is "&intarray", this proc will
+# call "p &intarray", capture "(int (*)[32]) 0x804a0e0", and return this
+# string.
+
+proc capture_pointer_with_type { pointer } {
+    global gdb_prompt
+    global expect_out
+
+    set test "capture type of pointer $pointer"
+    set output_string ""
+    gdb_test_multiple "p ${pointer}" $test {
+	-re "\\$\[0-9\]+ = .*$gdb_prompt $" {
+	    # Expected output of "p ${pointer}" is like "$7 = (int (*)[32]) 0x804a0e0",
+	    # and we want to extract "(int (*)[32]) 0x804a0e0" from it via
+	    # following regexp.
+	    if [regexp { \(.*\).*[a-fA-F0-9]+} $expect_out(0,string) output_string] {
+		# OUTPUT_STRING is expected to be like "(int (*)[32]) 0x804a0e0".
+		pass "$test"
+	    } else {
+		fail "$test"
+	    }
+	}
+    }
+
+    return $output_string
+}
+
 set array_start  [capture_value "/x &intarray\[0\]"]
 set array_end    [capture_value "/x &intarray\[32\]"]
 set struct_start [capture_value "/x &intstruct"]
@@ -160,6 +188,9 @@ set struct_end   [capture_value "/x &intstruct + 1"]
 set array_val    [capture_value "intarray"]
 set struct_val   [capture_value "intstruct"]
 
+set array_ptr_type [capture_pointer_with_type "&intarray"]
+set struct_ptr_type [capture_pointer_with_type "&intstruct"]
+
 make_dump_file "dump mem intarr2.bin $array_start $array_end" \
 	"dump array as memory, default"
 
@@ -255,38 +286,38 @@ proc test_restore_saved_value { restore_args msg oldval newval } {
 # srec format can not be loaded for 64-bit-only platforms
 if ![string compare $is64bitonly "no"] then {
   test_reload_saved_value "intarr1.srec" "reload array as value, srec" \
-	$array_val "intarray"
+	$array_val "\*$array_ptr_type"
   test_reload_saved_value "intstr1.srec" "reload struct as value, srec" \
-	$struct_val "intstruct"
+	$struct_val "\*$struct_ptr_type"
   test_reload_saved_value "intarr2.srec" "reload array as memory, srec" \
-	$array_val "intarray"
+	$array_val "\*$array_ptr_type"
   test_reload_saved_value "intstr2.srec" "reload struct as memory, srec" \
-	$struct_val "intstruct"
+	$struct_val "\*$struct_ptr_type"
 }
 
 # ihex format can not be loaded for 64-bit-only platforms
 if ![string compare $is64bitonly "no"] then {
 
   test_reload_saved_value "intarr1.ihex" "reload array as value, intel hex" \
-	$array_val "intarray"
+	$array_val "\*$array_ptr_type"
   test_reload_saved_value "intstr1.ihex" "reload struct as value, intel hex" \
-	$struct_val "intstruct"
+	$struct_val "\*$struct_ptr_type"
   test_reload_saved_value "intarr2.ihex" "reload array as memory, intel hex" \
-	$array_val "intarray"
+	$array_val "\*$array_ptr_type"
   test_reload_saved_value "intstr2.ihex" "reload struct as memory, intel hex" \
-	$struct_val "intstruct"
+	$struct_val "\*$struct_ptr_type"
 }
 
 # tekhex format can not be loaded for 64-bit-only platforms
 if ![string compare $is64bitonly "no"] then {
   test_reload_saved_value "intarr1.tekhex" "reload array as value, tekhex" \
-	$array_val "intarray"
+	$array_val "\*$array_ptr_type"
   test_reload_saved_value "intstr1.tekhex" "reload struct as value, tekhex" \
-	$struct_val "intstruct"
+	$struct_val "\*$struct_ptr_type"
   test_reload_saved_value "intarr2.tekhex" "reload array as memory, tekhex" \
-	$array_val "intarray"
+	$array_val "\*$array_ptr_type"
   test_reload_saved_value "intstr2.tekhex" "reload struct as memory, tekhex" \
-	$struct_val "intstruct"
+	$struct_val "\*$struct_ptr_type"
 }
 
 # Start a fresh gdb session
-- 
1.7.0.4


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]