This is the mail archive of the gdb-patches@sourceware.org mailing list for the GDB project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

Re: [PATCH 3/5] range stepping: gdb


On 05/16/2013 07:08 AM, Eli Zaretskii wrote:
>> Date: Wed, 15 May 2013 19:20:46 +0100
>> From: Pedro Alves <palves@redhat.com>
>> CC: gdb-patches@sourceware.org
>>
>> What do you think of this?
> 
> I think it's a really good and clear description.
> 
>> I'm okay with removing the whole second paragraph ("If the range is
>> empty...") if you think the first paragraph is already clear enough.
> 
> The first paragraph is clear enough, but I find the second paragraph
> reassuring me in that the interpretation of the first was correct.  So
> I think it is better to leave both.

Sorry for taking long to respond, and letting the context potentially
slip from you.  Here's the full updated patch with that bit merged in.
Nothing else in the docs changed.  I've updated a comment in
gdbthread.h, giving it a similar clarification treatment.

---------
Subject: range stepping: gdb

(text based on Yao's)

This patch teaches GDB to take advantage of target-assisted range
stepping.  It adds a new 'r ADDR1,ADDR2' action to vCont (vCont;r),
meaning, "step once, and keep stepping as long as the thread is in the
[ADDR1,ADDR2) range".

Rationale:

When user issues the "step" command on the following line of source,

   a = b + c + d * e - a;

GDB single-steps every single instruction until the program reaches a
new different line.  E.g., on x86_64, that line compiles to:

   0x08048434 <+65>:    mov    0x1c(%esp),%eax
   0x08048438 <+69>:    mov    0x30(%esp),%edx
   0x0804843c <+73>:    add    %eax,%edx
   0x0804843e <+75>:    mov    0x18(%esp),%eax
   0x08048442 <+79>:    imul   0x2c(%esp),%eax
   0x08048447 <+84>:    add    %edx,%eax
   0x08048449 <+86>:    sub    0x34(%esp),%eax
   0x0804844d <+90>:    mov    %eax,0x34(%esp)
   0x08048451 <+94>:    mov    0x1c(%esp),%eax

and the following is the RSP traffic between GDB and GDBserver:

 --> vCont;s:p2e13.2e13;c
 <-- T0505:68efffbf;04:30efffbf;08:3c840408;thread:p2e13.2e13;core:1;
 --> vCont;s:p2e13.2e13;c
 <-- T0505:68efffbf;04:30efffbf;08:3e840408;thread:p2e13.2e13;core:2;
 --> vCont;s:p2e13.2e13;c
 <-- T0505:68efffbf;04:30efffbf;08:42840408;thread:p2e13.2e13;core:2;
 --> vCont;s:p2e13.2e13;c
 <-- T0505:68efffbf;04:30efffbf;08:47840408;thread:p2e13.2e13;core:0;
 --> vCont;s:p2e13.2e13;c
 <-- T0505:68efffbf;04:30efffbf;08:49840408;thread:p2e13.2e13;core:0;
 --> vCont;s:p2e13.2e13;c
 <-- T0505:68efffbf;04:30efffbf;08:4d840408;thread:p2e13.2e13;core:0;
 --> vCont;s:p2e13.2e13;c
 <-- T0505:68efffbf;04:30efffbf;08:51840408;thread:p2e13.2e13;core:0;

IOW, a lot of roundtrips between GDB and GDBserver.

If we add a new command to the RSP, meaning "keep stepping and don't
report a stop until the program goes out of the [0x08048434,
0x08048451) address range", then the RSP traffic can be reduced down
to:

 --> vCont;r8048434,8048451:p2db0.2db0;c
 <-- T0505:68efffbf;04:30efffbf;08:51840408;thread:p2db0.2db0;core:1;

As number of packets is reduced dramatically, the performance of
stepping source lines is much improved.

In case something is wrong with range stepping on the stub side, the
debug info or even gdb, this adds a "set/show range-stepping" command
to be able to turn range stepping off.

v3:

- no longer use "is PC-in-stepping-range" or trap_expected checks deep
  in remote.c's target_resume to decide whether to send vCont;r or
  vCont;s.  It is better to leave that choice to higher layers (IOW,
  infrun.c/infcmd.c).
- "maint set/show range-stepping" renamed to "set/show range-stepping"
  folded into this patch.  The docs now explain what is range
  stepping, and why a user might need this command.
- NEWS and docs for GDB bits folded into this patch, and
  redone/expanded.

gdb/
2013-05-20  Yao Qi  <yao@codesourcery.com>
	    Pedro Alves  <palves@redhat.com>

	* gdbthread.h (struct thread_control_state) <may_range_step>: New
	field.
	* infcmd.c (step_once, until_next_command): Enable range stepping.
	* infrun.c (displaced_step_prepare): Disable range stepping.
	(resume): Disable range stepping if stepping over a breakpoint or
	we have software watchpoints.  If range stepping is enabled,
	assert the thread is in the stepping range.
	(clear_proceed_status_thread): Clear may_range_step.
	(handle_inferior_event): Disable range stepping as soon as we know
	the thread that hit the event.  Re-enable it whenever we're going
	to step with a step range.
	* remote.c (struct vCont_action_support) <r>: New field.
	(use_range_stepping): New global.
	(remote_vcont_probe): Handle 'r' action.
	(append_resumption): Append an 'r' action if the thread may range
	step.
	(show_range_stepping): New function.
	(set_range_stepping): New function.
	(_initialize_remote): Call add_setshow_boolean_cmd to register the
	'set range-stepping' and 'show range-stepping' commands.

	* NEWS: Mention range stepping, the new vCont;r action, and the
	new "set/show range-stepping" commands.

gdb/doc/
2013-05-20  Yao Qi  <yao@codesourcery.com>
	    Pedro Alves  <palves@redhat.com>

	* gdb.texinfo (Packets): Document 'vCont;r'.
	(Continuing and Stepping): Document target-assisted range
	stepping, and the 'set range-stepping' and 'show range-stepping'
	commands.

---

 gdb/NEWS            |   17 +++++++++
 gdb/doc/gdb.texinfo |   48 +++++++++++++++++++++++++
 gdb/gdbthread.h     |    7 ++++
 gdb/infcmd.c        |    8 ++++
 gdb/infrun.c        |   33 +++++++++++++++++
 gdb/remote.c        |   98 +++++++++++++++++++++++++++++++++++++++++++++++++++
 6 files changed, 210 insertions(+), 1 deletion(-)

diff --git a/gdb/NEWS b/gdb/NEWS
index 9ea0b14..05ae0a1 100644
--- a/gdb/NEWS
+++ b/gdb/NEWS
@@ -41,6 +41,10 @@ set debug nios2
 show debug nios2
   Control display of debugging messages related to Nios II targets.
 
+set range-stepping
+show range-stepping
+  Control whether target-assisted range stepping is enabled.
+
 * You can now use a literal value 'unlimited' for options that
   interpret 0 or -1 as meaning "unlimited".  E.g., "set
   trace-buffer-size unlimited" is now an alias for "set
@@ -70,6 +74,19 @@ show debug nios2
   ** The -trace-save MI command can optionally save trace buffer in Common
      Trace Format now.
 
+* GDB now supports target-assigned range stepping with remote targets.
+  This improves the performance of stepping source lines by reducing
+  the number of control packets from/to GDB.  See "New remote packets"
+  below.
+
+* New remote packets
+
+vCont;r
+
+  The vCont packet supports a new 'r' action, that tells the remote
+  stub to step through an address range itself, without GDB
+  involvemement at each single-step.
+
 *** Changes in GDB 7.6
 
 * Target record has been renamed to record-full.
diff --git a/gdb/doc/gdb.texinfo b/gdb/doc/gdb.texinfo
index 1907e59..4c41594 100644
--- a/gdb/doc/gdb.texinfo
+++ b/gdb/doc/gdb.texinfo
@@ -5219,6 +5219,38 @@ Execute one machine instruction, but if it is a function call,
 proceed until the function returns.
 
 An argument is a repeat count, as in @code{next}.
+
+@end table
+
+@anchor{range stepping}
+@cindex range stepping
+@cindex target-assisted range stepping
+By default, and if available, @value{GDBN} makes use of
+target-assisted @dfn{range stepping}.  In other words, whenever you
+use a stepping command (e.g., @code{step}, @code{next}), @value{GDBN}
+tells the target to step the corresponding range of instruction
+addresses instead of issuing multiple single-steps.  This speeds up
+line stepping, particularly for remote targets.  Ideally, there should
+be no reason you would want to turn range stepping off.  However, it's
+possible that a bug in the debug info, a bug in the remote stub (for
+remote targets), or even a bug in @value{GDBN} could make line
+stepping behave incorrectly when target-assisted range stepping is
+enabled.  You can use the following command to turn off range stepping
+if necessary:
+
+@table @code
+@kindex set range-stepping
+@kindex show range-stepping
+@item set range-stepping
+@itemx show range-stepping
+Control whether range stepping is enabled.
+
+If @code{on}, and the target supports it, @value{GDBN} tells the
+target to step a range of addresses itself, instead of issuing
+multiple single-steps.  If @code{off}, @value{GDBN} always issues
+single-steps, even if range stepping is supported by the target.  The
+default is @code{on}.
+
 @end table
 
 @node Skipping Over Functions and Files
@@ -37401,6 +37433,22 @@ Step.
 Step with signal @var{sig}.  The signal @var{sig} should be two hex digits.
 @item t
 Stop.
+@item r @var{start},@var{end}
+Step once, and then keep stepping as long as the thread stops at
+addresses between @var{start} (inclusive) and @var{end} (exclusive).
+The remote stub reports a stop reply when either the thread goes out
+of the range or is stopped due to an unrelated reason, such as hitting
+a breakpoint.  @xref{range stepping}.
+
+If the range is empty (@var{start} == @var{end}), then the action
+becomes equivalent to the @samp{s} action.  In other words,
+single-step once, and report the stop (even if the stepped instruction
+jumps to @var{start}).
+
+(A stop reply may be sent at any point even if the PC is still within
+the stepping range; for example, it is valid to implement this packet
+in a degenerate way as a single instruction step operation.)
+
 @end table
 
 The optional argument @var{addr} normally associated with the 
diff --git a/gdb/gdbthread.h b/gdb/gdbthread.h
index a9f8a94..e93b965 100644
--- a/gdb/gdbthread.h
+++ b/gdb/gdbthread.h
@@ -65,6 +65,13 @@ struct thread_control_state
   CORE_ADDR step_range_start;	/* Inclusive */
   CORE_ADDR step_range_end;	/* Exclusive */
 
+  /* If GDB issues a target step request, and this is nonzero, the
+     target should single-step this thread once, and then continue
+     single-stepping it without GDB involvement as long as thread
+     stops in step range above.  If this is zero, the target should
+     ignore the step range, and only issue one single step.  */
+  int may_range_step;
+
   /* Stack frame address as of when stepping command was issued.
      This is how we know when we step into a subroutine call, and how
      to set the frame for the breakpoint used to step out.  */
diff --git a/gdb/infcmd.c b/gdb/infcmd.c
index aeb24ff..30621e4 100644
--- a/gdb/infcmd.c
+++ b/gdb/infcmd.c
@@ -1046,9 +1046,14 @@ step_once (int skip_subroutines, int single_inst, int count, int thread)
 				 &tp->control.step_range_start,
 				 &tp->control.step_range_end);
 
+	  tp->control.may_range_step = 1;
+
 	  /* If we have no line info, switch to stepi mode.  */
 	  if (tp->control.step_range_end == 0 && step_stop_if_no_debug)
-	    tp->control.step_range_start = tp->control.step_range_end = 1;
+	    {
+	      tp->control.step_range_start = tp->control.step_range_end = 1;
+	      tp->control.may_range_step = 0;
+	    }
 	  else if (tp->control.step_range_end == 0)
 	    {
 	      const char *name;
@@ -1337,6 +1342,7 @@ until_next_command (int from_tty)
       tp->control.step_range_start = BLOCK_START (SYMBOL_BLOCK_VALUE (func));
       tp->control.step_range_end = sal.end;
     }
+  tp->control.may_range_step = 1;
 
   tp->control.step_over_calls = STEP_OVER_ALL;
 
diff --git a/gdb/infrun.c b/gdb/infrun.c
index 57c427d..376a440 100644
--- a/gdb/infrun.c
+++ b/gdb/infrun.c
@@ -1311,6 +1311,7 @@ static int
 displaced_step_prepare (ptid_t ptid)
 {
   struct cleanup *old_cleanups, *ignore_cleanups;
+  struct thread_info *tp = find_thread_ptid (ptid);
   struct regcache *regcache = get_thread_regcache (ptid);
   struct gdbarch *gdbarch = get_regcache_arch (regcache);
   CORE_ADDR original, copy;
@@ -1323,6 +1324,12 @@ displaced_step_prepare (ptid_t ptid)
      support displaced stepping.  */
   gdb_assert (gdbarch_displaced_step_copy_insn_p (gdbarch));
 
+  /* Disable range stepping while executing in the scratch pad.  We
+     want a single-step even if executing the displaced instruction in
+     the scratch buffer lands within the stepping range (e.g., a
+     jump/branch).  */
+  tp->control.may_range_step = 0;
+
   /* We have to displaced step one thread at a time, as we only have
      access to a single scratch space per inferior.  */
 
@@ -1778,6 +1785,11 @@ how to step past a permanent breakpoint on this architecture.  Try using\n\
 a command like `return' or `jump' to continue execution."));
     }
 
+  /* If we have a breakpoint to step over, make sure to do a single
+     step only.  Same if we have software watchpoints.  */
+  if (tp->control.trap_expected || bpstat_should_step ())
+    tp->control.may_range_step = 0;
+
   /* If enabled, step over breakpoints by executing a copy of the
      instruction at a different address.
 
@@ -1939,6 +1951,16 @@ a command like `return' or `jump' to continue execution."));
           displaced_step_dump_bytes (gdb_stdlog, buf, sizeof (buf));
         }
 
+      if (tp->control.may_range_step)
+	{
+	  /* If we're resuming a thread with the PC out of the step
+	     range, then we're doing some nested/finer run control
+	     operation, like stepping the thread out of the dynamic
+	     linker or the displaced stepping scratch pad.  We
+	     shouldn't have allowed a range step then.  */
+	  gdb_assert (pc_in_thread_step_range (pc, tp));
+	}
+
       /* Install inferior's terminal modes.  */
       target_terminal_inferior ();
 
@@ -1980,6 +2002,7 @@ clear_proceed_status_thread (struct thread_info *tp)
   tp->control.trap_expected = 0;
   tp->control.step_range_start = 0;
   tp->control.step_range_end = 0;
+  tp->control.may_range_step = 0;
   tp->control.step_frame_id = null_frame_id;
   tp->control.step_stack_frame_id = null_frame_id;
   tp->control.step_over_calls = STEP_OVER_UNDEBUGGABLE;
@@ -3223,6 +3246,10 @@ handle_inferior_event (struct execution_control_state *ecs)
       /* If it's a new thread, add it to the thread database.  */
       if (ecs->event_thread == NULL)
 	ecs->event_thread = add_thread (ecs->ptid);
+
+      /* Disable range stepping.  If the next step request could use a
+	 range, this will be end up re-enabled then.  */
+      ecs->event_thread->control.may_range_step = 0;
     }
 
   /* Dependent on valid ECS->EVENT_THREAD.  */
@@ -4717,6 +4744,11 @@ process_event_stop_test:
 	   paddress (gdbarch, ecs->event_thread->control.step_range_start),
 	   paddress (gdbarch, ecs->event_thread->control.step_range_end));
 
+      /* Tentatively re-enable range stepping; `resume' disables it if
+	 necessary (e.g., if we're stepping over a breakpoint or we
+	 have software watchpoints).  */
+      ecs->event_thread->control.may_range_step = 1;
+
       /* When stepping backward, stop at beginning of line range
 	 (unless it's the function entry point, in which case
 	 keep going back to the call point).  */
@@ -5233,6 +5265,7 @@ process_event_stop_test:
 
   ecs->event_thread->control.step_range_start = stop_pc_sal.pc;
   ecs->event_thread->control.step_range_end = stop_pc_sal.end;
+  ecs->event_thread->control.may_range_step = 1;
   set_step_info (frame, stop_pc_sal);
 
   if (debug_infrun)
diff --git a/gdb/remote.c b/gdb/remote.c
index eb58b94..658fae2 100644
--- a/gdb/remote.c
+++ b/gdb/remote.c
@@ -260,8 +260,15 @@ struct vCont_action_support
 {
   /* vCont;t */
   int t;
+
+  /* vCont;r */
+  int r;
 };
 
+/* Controls whether GDB is willing to use range stepping.  */
+
+static int use_range_stepping = 1;
+
 /* Description of the remote protocol state for the currently
    connected target.  This is per-target state, and independent of the
    selected architecture.  */
@@ -4653,6 +4660,7 @@ remote_vcont_probe (struct remote_state *rs)
       support_c = 0;
       support_C = 0;
       rs->supports_vCont.t = 0;
+      rs->supports_vCont.r = 0;
       while (p && *p == ';')
 	{
 	  p++;
@@ -4666,6 +4674,8 @@ remote_vcont_probe (struct remote_state *rs)
 	    support_C = 1;
 	  else if (*p == 't' && (*(p + 1) == ';' || *(p + 1) == 0))
 	    rs->supports_vCont.t = 1;
+	  else if (*p == 'r' && (*(p + 1) == ';' || *(p + 1) == 0))
+	    rs->supports_vCont.r = 1;
 
 	  p = strchr (p, ';');
 	}
@@ -4697,6 +4707,42 @@ append_resumption (char *p, char *endp,
 
   if (step && siggnal != GDB_SIGNAL_0)
     p += xsnprintf (p, endp - p, ";S%02x", siggnal);
+  else if (step
+	   /* GDB is willing to range step.  */
+	   && use_range_stepping
+	   /* Target supports range stepping.  */
+	   && rs->supports_vCont.r
+	   /* We don't currently support range stepping multiple
+	      threads with a wildcard (though the protocol allows it,
+	      so stubs shouldn't make an active effort to forbid
+	      it).  */
+	   && !(remote_multi_process_p (rs) && ptid_is_pid (ptid)))
+    {
+      struct thread_info *tp;
+
+      if (ptid_equal (ptid, minus_one_ptid))
+	{
+	  /* If we don't know about the target thread's tid, then
+	     we're resuming magic_null_ptid (see caller).  */
+	  tp = find_thread_ptid (magic_null_ptid);
+	}
+      else
+	tp = find_thread_ptid (ptid);
+      gdb_assert (tp != NULL);
+
+      if (tp->control.may_range_step)
+	{
+	  int addr_size = gdbarch_addr_bit (target_gdbarch ()) / 8;
+
+	  p += xsnprintf (p, endp - p, ";r%s,%s",
+			  phex_nz (tp->control.step_range_start,
+				   addr_size),
+			  phex_nz (tp->control.step_range_end,
+				   addr_size));
+	}
+      else
+	p += xsnprintf (p, endp - p, ";s");
+    }
   else if (step)
     p += xsnprintf (p, endp - p, ";s");
   else if (siggnal != GDB_SIGNAL_0)
@@ -11659,6 +11705,44 @@ remote_upload_trace_state_variables (struct uploaded_tsv **utsvp)
   return 0;
 }
 
+/* The "set/show range-stepping" show hook.  */
+
+static void
+show_range_stepping (struct ui_file *file, int from_tty,
+		     struct cmd_list_element *c,
+		     const char *value)
+{
+  fprintf_filtered (file,
+		    _("Debugger's willingness to use range stepping "
+		      "is %s.\n"), value);
+}
+
+/* The "set/show range-stepping" set hook.  */
+
+static void
+set_range_stepping (char *ignore_args, int from_tty,
+		    struct cmd_list_element *c)
+{
+  /* Whene enabling, check whether range stepping is actually
+     supported by the target, and warn if not.  */
+  if (use_range_stepping)
+    {
+      if (remote_desc != NULL)
+	{
+	  struct remote_state *rs = get_remote_state ();
+
+	  if (remote_protocol_packets[PACKET_vCont].support == PACKET_SUPPORT_UNKNOWN)
+	    remote_vcont_probe (rs);
+
+	  if (remote_protocol_packets[PACKET_vCont].support == PACKET_ENABLE
+	      && rs->supports_vCont.r)
+	    return;
+	}
+
+      warning (_("Range stepping is not supported by the current target"));
+    }
+}
+
 void
 _initialize_remote (void)
 {
@@ -12056,6 +12140,20 @@ Set the remote pathname for \"run\""), _("\
 Show the remote pathname for \"run\""), NULL, NULL, NULL,
 				   &remote_set_cmdlist, &remote_show_cmdlist);
 
+  add_setshow_boolean_cmd ("range-stepping", class_run,
+			   &use_range_stepping, _("\
+Enable or disable range stepping."), _("\
+Show whether target-assisted range stepping is enabled."), _("\
+If on, and the target supports it, when stepping a source line, GDB\n\
+tells the target to step the corresponding range of addresses itself instead\n\
+of issuing multiple single-steps.  This speeds up source level\n\
+stepping.  If off, GDB always issues single-steps, even if range\n\
+stepping is supported by the target.  The default is on."),
+			   set_range_stepping,
+			   show_range_stepping,
+			   &setlist,
+			   &showlist);
+
   /* Eventually initialize fileio.  See fileio.c */
   initialize_remote_fileio (remote_set_cmdlist, remote_show_cmdlist);
 


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]