This is the mail archive of the
gdb-patches@sourceware.org
mailing list for the GDB project.
Re: [PATCH v3] Exit code of exited inferiors in -list-thread-groups
- From: Pedro Alves <palves at redhat dot com>
- To: Simon Marchi <simon dot marchi at ericsson dot com>
- Cc: GDB Patches <gdb-patches at sourceware dot org>
- Date: Tue, 18 Jun 2013 13:42:47 +0100
- Subject: Re: [PATCH v3] Exit code of exited inferiors in -list-thread-groups
- References: <51BF4D9B dot 8060105 at ericsson dot com>
On 06/17/2013 06:55 PM, Simon Marchi wrote:
> Here is a new version of my patch to show the exit code of exited inferiors in -list-thread-groups.
> I made changes following Pedro's comments at:
> http://sourceware.org/ml/gdb-patches/2013-06/msg00126.html
Thanks.
> gdb/doc/ChangeLog:
> 2013-06-17 Simon Marchi <simon.marchi@ericsson.com>
>
> * gdb.texinfo: Document new exit-code field.
This should mention the node name in the bit that goes
in ()'s. See existing examples. It should also mention
-list-thread-groups.
> ---
> gdb/NEWS | 3 ++
> gdb/doc/gdb.texinfo | 5 +++
> gdb/inferior.c | 4 +-
> gdb/mi/mi-main.c | 3 ++
> gdb/testsuite/gdb.mi/mi-exit-code.c | 29 ++++++++++++++
> gdb/testsuite/gdb.mi/mi-exit-code.exp | 71 +++++++++++++++++++++++++++++++++++
> 6 files changed, 113 insertions(+), 2 deletions(-)
> create mode 100644 gdb/testsuite/gdb.mi/mi-exit-code.c
> create mode 100644 gdb/testsuite/gdb.mi/mi-exit-code.exp
>
> +@item exit-code
> +The exit code of this thread group when it last exited. This field is
> +only present for thread groups of type @samp{process} and only if the
> +process is not running.
> +
> ui_out_field_fmt (uiout, "id", "i%d", inferior->num);
> ui_out_field_string (uiout, "type", "process");
> + if (inferior->has_exit_code)
> + ui_out_field_string (uiout, "exit-code",
> + int_string (inferior->exit_code, 8, 0, 0, 1));
Indentation is still wrong here though. Should be:
if (inferior->has_exit_code)
ui_out_field_string (uiout, "exit-code",
int_string (inferior->exit_code, 8, 0, 0, 1));
(note: the tabs are not optional)
> if (inferior->pid != 0)
> ui_out_field_int (uiout, "pid", inferior->pid);
>
> diff --git a/gdb/testsuite/gdb.mi/mi-exit-code.c b/gdb/testsuite/gdb.mi/mi-exit-code.c
> new file mode 100644
> index 0000000..a523385
> --- /dev/null
> +++ b/gdb/testsuite/gdb.mi/mi-exit-code.c
> @@ -0,0 +1,29 @@
> +/* Copyright 1999-2013 Free Software Foundation, Inc.
> +
> + This file is part of GDB.
> +
> + This program is free software; you can redistribute it and/or modify
> + it under the terms of the GNU General Public License as published by
> + the Free Software Foundation; either version 3 of the License, or
> + (at your option) any later version.
> +
> + This program is distributed in the hope that it will be useful,
> + but WITHOUT ANY WARRANTY; without even the implied warranty of
> + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + GNU General Public License for more details.
> +
> + You should have received a copy of the GNU General Public License
> + along with this program. If not, see <http://www.gnu.org/licenses/>. */
> +
> +int exit_code = 0;
> +
> +int
> +main(int argc, char **argv)
Space before parens.
> +{
> + if (argc > 1)
> + {
> + exit_code = atoi (argv[1]);
> + }
Single statement gets no braces.
> +
> + return exit_code;
> +}
> diff --git a/gdb/testsuite/gdb.mi/mi-exit-code.exp b/gdb/testsuite/gdb.mi/mi-exit-code.exp
> new file mode 100644
> index 0000000..50d8530
> --- /dev/null
> +++ b/gdb/testsuite/gdb.mi/mi-exit-code.exp
> @@ -0,0 +1,71 @@
> +# Copyright 1999-2013 Free Software Foundation, Inc.
> +
> +# This program is free software; you can redistribute it and/or modify
> +# it under the terms of the GNU General Public License as published by
> +# the Free Software Foundation; either version 3 of the License, or
> +# (at your option) any later version.
> +#
> +# This program is distributed in the hope that it will be useful,
> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> +# GNU General Public License for more details.
> +#
> +# You should have received a copy of the GNU General Public License
> +# along with this program. If not, see <http://www.gnu.org/licenses/>.
> +
> +load_lib mi-support.exp
> +set MIFLAGS "-i=mi"
> +
> +gdb_exit
> +if [mi_gdb_start] {
> + continue
> +}
> +
> +standard_testfile
> +
> +if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
> +
> + untested mi-exit-code.exp
untested "failed to compile $testfile"
http://sourceware.org/gdb/wiki/GDBTestcaseCookbook#A.22untested.22_calls
> + return -1
> +}
> +
> +proc test_list_thread_groups { } {
> + global hex
Note this one is unused. (though my proposal below adds one).
> + global decimal
> +
> + # Check before any run, exit-code should not be present.
> + mi_gdb_test "122-list-thread-groups" "122\\^done,groups=\\\[\{id=\"i1\",type=\"process\"\}\]" "-list-thread-groups before any run"
IMO, it's better to split these long lines between arguments.
> +
> + mi_run_to_main
> +
> + # Check during the run, exit-code should not be present.
> + mi_gdb_test "123-list-thread-groups" "123\\^done,groups=\\\[\{id=\"i1\",type=\"process\",pid=\"$decimal\",executable=\".*\".*" "-list-thread-groups during first run"
> +
> + # Exit the inferior.
> + mi_send_resuming_command "exec-continue" "continuing to exit inferior (first run)"
> + mi_expect_stop "exited-normally" "" "" "" "" "" "exiting inferior (first run)"
> +
> + # Check after the run, exit-code should be present.
> + mi_gdb_test "124-list-thread-groups" "124\\^done,groups=\\\[\{id=\"i1\",type=\"process\",exit-code=\"0\",executable=\".*\"\}\]" "-list-thread-groups after first run"
> +
> + mi_run_to_main
http://sourceware.org/gdb/wiki/GDBTestcaseCookbook#Make_sure_test_messages_are_unique
$ cat testsuite/gdb.sum| grep PASS | sort | uniq -c | sort -n
1 PASS: gdb.mi/mi-exit-code.exp: exiting inferior (first run)
1 PASS: gdb.mi/mi-exit-code.exp: exiting inferior (second run)
1 PASS: gdb.mi/mi-exit-code.exp: -list-thread-groups after first run
1 PASS: gdb.mi/mi-exit-code.exp: -list-thread-groups after second run
1 PASS: gdb.mi/mi-exit-code.exp: -list-thread-groups before any run
1 PASS: gdb.mi/mi-exit-code.exp: -list-thread-groups during first run
1 PASS: gdb.mi/mi-exit-code.exp: -list-thread-groups during second run
2 PASS: gdb.mi/mi-exit-code.exp: breakpoint at main
2 PASS: gdb.mi/mi-exit-code.exp: mi runto main
Note the 2's.
Instead of manually caring to do "first run", "second run" etc. in
each test, we can use with_test_prefix, and that neatly takes care
of those 2's as well.
> +
> + # Write the exit code we want in the global var
> + mi_gdb_test "-data-write-memory-bytes &exit_code 08"
This -data-write-memory-bytes is writing one byte to the address of
exit_code (and int), and expecting exit_code to end up with value 8.
That assumes a little endian target; it'll do the wrong thing on big
endian targets, like e.g., PowerPC. We can just do "set var exit_code = 8"
instead, and let GDB worry about such details.
I went ahead and did all these changes on top of your patch, so you
could see what I mean. I tweaked the messages and comments a
little. We now get:
$ cat testsuite/gdb.sum | grep PASS | sort | uniq -c | sort -n
1 PASS: gdb.mi/mi-exit-code.exp: first run: breakpoint at main
1 PASS: gdb.mi/mi-exit-code.exp: first run: exit normally
1 PASS: gdb.mi/mi-exit-code.exp: first run: -list-thread-groups after exit shows exit-code
1 PASS: gdb.mi/mi-exit-code.exp: first run: -list-thread-groups during run shows no exit-code
1 PASS: gdb.mi/mi-exit-code.exp: first run: mi runto main
1 PASS: gdb.mi/mi-exit-code.exp: -list-thread-groups before run shows no exit-code
1 PASS: gdb.mi/mi-exit-code.exp: second run: breakpoint at main
1 PASS: gdb.mi/mi-exit-code.exp: second run: exit with code
1 PASS: gdb.mi/mi-exit-code.exp: second run: -list-thread-groups after exit shows exit-code
1 PASS: gdb.mi/mi-exit-code.exp: second run: -list-thread-groups during run shows no exit-code
1 PASS: gdb.mi/mi-exit-code.exp: second run: mi runto main
1 PASS: gdb.mi/mi-exit-code.exp: second run: write exit code
$ cat testsuite/gdb.sum | grep PASS
PASS: gdb.mi/mi-exit-code.exp: -list-thread-groups before run shows no exit-code
PASS: gdb.mi/mi-exit-code.exp: first run: breakpoint at main
PASS: gdb.mi/mi-exit-code.exp: first run: mi runto main
PASS: gdb.mi/mi-exit-code.exp: first run: -list-thread-groups during run shows no exit-code
PASS: gdb.mi/mi-exit-code.exp: first run: exit normally
PASS: gdb.mi/mi-exit-code.exp: first run: -list-thread-groups after exit shows exit-code
PASS: gdb.mi/mi-exit-code.exp: second run: breakpoint at main
PASS: gdb.mi/mi-exit-code.exp: second run: mi runto main
PASS: gdb.mi/mi-exit-code.exp: second run: write exit code
PASS: gdb.mi/mi-exit-code.exp: second run: -list-thread-groups during run shows no exit-code
PASS: gdb.mi/mi-exit-code.exp: second run: exit with code
PASS: gdb.mi/mi-exit-code.exp: second run: -list-thread-groups after exit shows exit-code
Could you merge this into your patch, please?
---
gdb/testsuite/gdb.mi/mi-exit-code.c | 6 +-
gdb/testsuite/gdb.mi/mi-exit-code.exp | 81 ++++++++++++++++++++-------------
2 files changed, 51 insertions(+), 36 deletions(-)
diff --git a/gdb/mi/mi-main.c b/gdb/mi/mi-main.c
index 4fa0c93..0a10930 100644
--- a/gdb/mi/mi-main.c
+++ b/gdb/mi/mi-main.c
@@ -572,8 +572,8 @@ print_one_inferior (struct inferior *inferior, void *xdata)
ui_out_field_fmt (uiout, "id", "i%d", inferior->num);
ui_out_field_string (uiout, "type", "process");
if (inferior->has_exit_code)
- ui_out_field_string (uiout, "exit-code",
- int_string (inferior->exit_code, 8, 0, 0, 1));
+ ui_out_field_string (uiout, "exit-code",
+ int_string (inferior->exit_code, 8, 0, 0, 1));
if (inferior->pid != 0)
ui_out_field_int (uiout, "pid", inferior->pid);
diff --git a/gdb/testsuite/gdb.mi/mi-exit-code.c b/gdb/testsuite/gdb.mi/mi-exit-code.c
index a523385..564efc7 100644
--- a/gdb/testsuite/gdb.mi/mi-exit-code.c
+++ b/gdb/testsuite/gdb.mi/mi-exit-code.c
@@ -18,12 +18,10 @@
int exit_code = 0;
int
-main(int argc, char **argv)
+main (int argc, char **argv)
{
if (argc > 1)
- {
- exit_code = atoi (argv[1]);
- }
+ exit_code = atoi (argv[1]);
return exit_code;
}
diff --git a/gdb/testsuite/gdb.mi/mi-exit-code.exp b/gdb/testsuite/gdb.mi/mi-exit-code.exp
index 50d8530..c68c7cc 100644
--- a/gdb/testsuite/gdb.mi/mi-exit-code.exp
+++ b/gdb/testsuite/gdb.mi/mi-exit-code.exp
@@ -24,8 +24,7 @@ if [mi_gdb_start] {
standard_testfile
if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
-
- untested mi-exit-code.exp
+ untested "failed to compile $testfile"
return -1
}
@@ -33,36 +32,54 @@ proc test_list_thread_groups { } {
global hex
global decimal
- # Check before any run, exit-code should not be present.
- mi_gdb_test "122-list-thread-groups" "122\\^done,groups=\\\[\{id=\"i1\",type=\"process\"\}\]" "-list-thread-groups before any run"
-
- mi_run_to_main
-
- # Check during the run, exit-code should not be present.
- mi_gdb_test "123-list-thread-groups" "123\\^done,groups=\\\[\{id=\"i1\",type=\"process\",pid=\"$decimal\",executable=\".*\".*" "-list-thread-groups during first run"
-
- # Exit the inferior.
- mi_send_resuming_command "exec-continue" "continuing to exit inferior (first run)"
- mi_expect_stop "exited-normally" "" "" "" "" "" "exiting inferior (first run)"
-
- # Check after the run, exit-code should be present.
- mi_gdb_test "124-list-thread-groups" "124\\^done,groups=\\\[\{id=\"i1\",type=\"process\",exit-code=\"0\",executable=\".*\"\}\]" "-list-thread-groups after first run"
-
- mi_run_to_main
-
- # Write the exit code we want in the global var
- mi_gdb_test "-data-write-memory-bytes &exit_code 08"
-
- # Check during the second run, exit-code should not be present.
- mi_gdb_test "125-list-thread-groups" "125\\^done,groups=\\\[\{id=\"i1\",type=\"process\",pid=\"$decimal\",executable=\".*\".*" "-list-thread-groups during second run"
-
- # Exit the inferior.
- mi_send_resuming_command "exec-continue" "continuing to exit inferior (second run)"
- mi_expect_stop "exited" "" "" "" "" "" "exiting inferior (second run)"
-
- # Check after the second run, exit-code should be present.
- mi_gdb_test "126-list-thread-groups" "126\\^done,groups=\\\[\{id=\"i1\",type=\"process\",exit-code=\"010\",executable=\".*\"\}\]" "-list-thread-groups after second run"
-
+ # Before any run, exit-code should not be present.
+ mi_gdb_test \
+ "122-list-thread-groups" \
+ "122\\^done,groups=\\\[\{id=\"i1\",type=\"process\"\}\]" \
+ "-list-thread-groups before run shows no exit-code"
+
+ with_test_prefix "first run" {
+ mi_run_to_main
+
+ # During the run, exit-code should not be present.
+ mi_gdb_test \
+ "123-list-thread-groups" \
+ "123\\^done,groups=\\\[\{id=\"i1\",type=\"process\",pid=\"$decimal\",executable=\".*\".*" \
+ "-list-thread-groups during run shows no exit-code"
+
+ # Exit the inferior.
+ mi_send_resuming_command "exec-continue" "continuing to inferior exit"
+ mi_expect_stop "exited-normally" "" "" "" "" "" "exit normally"
+
+ # After the run, exit-code should be present.
+ mi_gdb_test \
+ "124-list-thread-groups" \
+ "124\\^done,groups=\\\[\{id=\"i1\",type=\"process\",exit-code=\"0\",executable=\".*\"\}\]" \
+ "-list-thread-groups after exit shows exit-code"
+ }
+
+ with_test_prefix "second run" {
+ mi_run_to_main
+
+ # Write the exit code we want in the global var
+ mi_gdb_test "set var exit_code = 8" ".*\\^done" "write exit code"
+
+ # During the second run, exit-code should not be present.
+ mi_gdb_test \
+ "125-list-thread-groups" \
+ "125\\^done,groups=\\\[\{id=\"i1\",type=\"process\",pid=\"$decimal\",executable=\".*\".*" \
+ "-list-thread-groups during run shows no exit-code"
+
+ # Exit the inferior.
+ mi_send_resuming_command "exec-continue" "continuing to inferior exit"
+ mi_expect_stop "exited" "" "" "" "" "" "exit with code"
+
+ # After the second run, exit-code should be present.
+ mi_gdb_test \
+ "126-list-thread-groups" \
+ "126\\^done,groups=\\\[\{id=\"i1\",type=\"process\",exit-code=\"010\",executable=\".*\"\}\]" \
+ "-list-thread-groups after exit shows exit-code"
+ }
}
test_list_thread_groups