This is the mail archive of the
gdb-patches@sourceware.org
mailing list for the GDB project.
[PATCH 1/1] Documentation for MPX.
- From: Walfred Tedeschi <walfred dot tedeschi at intel dot com>
- To: palves at redhat dot com, eliz at gnu dot org
- Cc: gdb-patches at sourceware dot org, Walfred Tedeschi <walfred dot tedeschi at intel dot com>
- Date: Thu, 21 Nov 2013 16:06:32 +0100
- Subject: [PATCH 1/1] Documentation for MPX.
- Authentication-results: sourceware.org; auth=none
Hello Eli and Pedro,
This should complement the MPX registers check-in in terms of documentation.
Here I have tried to incorporate feedback from you both.
Thanks a lot for your review on the former patch series.
Best regards,
-Fred
2013-1X-XX Walfred Tedeschi <walfred.tedeschi@intel.com>
* NEWS: Add section for Intel(R) Architecture Instructions
Extesions mentioning MPX.
doc/
* gdb.texinfo (i386 Features): Add MPX feature registers.
(x86 Specific featuresx86 Architecture-specific Issues): Adds
a subsubsection for MPX and describes the display of the
boundary registers.
---
gdb/NEWS | 2 ++
gdb/doc/gdb.texinfo | 46 ++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 48 insertions(+), 0 deletions(-)
diff --git a/gdb/NEWS b/gdb/NEWS
index 9fc3638..fdb33d4 100644
--- a/gdb/NEWS
+++ b/gdb/NEWS
@@ -5558,3 +5558,5 @@ GDB now handles cross debugging. If you are remotely debugging between
two different machines, type ``./configure host -target=targ''.
Host is the machine where GDB will run; targ is the machine
where the program that you are debugging will run.
+
+ * GDB now supports access to Intel(R) MPX registers on GNU/Linux.
diff --git a/gdb/doc/gdb.texinfo b/gdb/doc/gdb.texinfo
index d854f46..6041b4a 100644
--- a/gdb/doc/gdb.texinfo
+++ b/gdb/doc/gdb.texinfo
@@ -21363,6 +21363,42 @@ be returned in a register.
@kindex show struct-convention
Show the current setting of the convention to return @code{struct}s
from functions.
+
+@subsubsection Intel(R) Memory Protection Extensions (MPX).
+
+@item bnd0raw..bnd3raw and bnd0...bnd3 registers display.
+Memory Protection Extension (MPX) adds the bound registers @samp{BND0}
+@footnote{Capital letters are used to distinguish between architecture
+registers and pseudo registers. A set of pseudo registers for the bound
+registers is created to simplify the display.} through @samp{BND3}. Bound
+registers store a pair of 64-bit values which are the lower bound and upper
+bound. Bounds are effective addresses or memory locations. The upper bounds
+are architecturally represented in 1's complement form. A bound having lower
+bound = 0, and upper bound = 0 (1's complement of all bits set) will allow
+access to the entire address space.
+
+Architectuere registers @samp{BND0} through @samp{BND3} are
+represented in @value{GDBN} as @samp{bnd0raw} through @samp{bnd3raw}.
+Pseudo registers @samp{bnd0} through @samp{bnd3} display the upper bound
+performing the complement of one operation on the upper bound value, i.e.@
+when upper bound in @samp{bnd0raw} is 0 in the @value{GDBN} @samp{bnd0} it will
+be @code{0xfff...}. In this sense it can also be noted that the upper bounds are
+inclusive.
+
+As an example, assume that the register BND0 holds bounds for a pointer having
+access allowed for the range between 0x32 and 0x71. The values present on
+bnd0raw and bnd registers are presented as follows:
+
+@smallexample
+ bnd0raw = {0x32, 0xffffffff8e}
+ bnd0 = {lbound = 0x32, ubound = 0x71} : size 64
+@end smallexample
+
+This way the architecture value can be accessed via bnd0raw...bnd3raw. Any change
+on bnd0..bnd3 or bnd0raw...bnd3raw is reflect on its counterpart. When displaying
+bnd0..bnd3 register with Python support also the size of the bounds is displayed.
+
+
@end table
@node Alpha
@@ -43138,6 +43174,16 @@ describe the upper 128 bits of @sc{ymm} registers:
@samp{ymm0h} through @samp{ymm15h} for amd64
@end itemize
+The @samp{org.gnu.gdb.i386.mpx} is an optional feature representing Intel(R)
+Memory Protection Extension (MPX). It should describe the following registers:
+
+@itemize @minus
+@item
+@samp{bnd0raw} through @samp{bnd3raw} for i386 and amd64.
+@item
+@samp{bndcfgu} and @samp{bndstatus} for i386 and amd64.
+@end itemize
+
The @samp{org.gnu.gdb.i386.linux} feature is optional. It should
describe a single register, @samp{orig_eax}.
--
1.7.6.5