This is the mail archive of the
gdb@sources.redhat.com
mailing list for the GDB project.
Re: Using gdb with JEENI
- To: Jeremy Lin <chienyul at yahoo dot com>
- Subject: Re: Using gdb with JEENI
- From: Fernando Nasser <fnasser at cygnus dot com>
- Date: Wed, 17 Jan 2001 18:08:48 -0500
- CC: gdb at sourceware dot cygnus dot com
- Organization: Red Hat , Inc. - Toronto
- References: <20010117230125.9518.qmail@web2304.mail.yahoo.com>
Which version of Cygwin are you using?
Jeremy Lin wrote:
>
> I have a problem using JEENI with GDB 5.0 debugging.
> JEENI FirmwareVersion:2.0
> Connected via serial port and RDI(tar rdi s=com2),
> I'm doing the eCos porting to our customize board based on
> Samsung KS32C50100 (ARM7TDMI core). Right now I'm debugging
> the ROM image which initialize the board. The problem is, for example,
> here is a sample instructions of the ROM image dump by gnu objdump:
> 00008060 <reset_vector>:
> 8060: e59f0458 ldr r0, [pc, #458]
> 8064: e5800000 str r0, [r0]
>
> 00008068 <warm_reset>:
> 8068: e3a00000 mov r0, #0 ; 0x0
> 806c: e5800040 str r0, [r0, #64]
> 8070: e59f144c ldr r1, [pc, #44c]
> 8074: e5912008 ldr r2, [r1, #8]
> 8078: e5802008 str r2, [r0, #8]
> 807c: e5912040 ldr r2, [r1, #64]
> 8080: e5802028 str r2, [r0, #40]
> 8084: ef000000 swi 0x00000000
>
> when I set a breakpoint"b *0x8070" then "continue", it breaks
> normally. But after that I type "stepi" to run next instruction.
> This message comes out and gdb was terminated:
>
> 0 [main] arm-elf-gdb 1003 handle_exceptions: Exception: \
> STATUS_ACCESS_VIOLATION
> 21532 [main] arm-elf-gdb 1003 stackdump: Dumping stack trace to
> arm-elf-gdb.exe.stack.dump
> Segmentation fault (core dump)
>
> This happens also when I set the 2nd breakpoint (for example, at 0x8080) and
> enter "continue". So I can only set one breakpoint at a time...
> Does any one have the same problem?
>
> __________________________________________________
> Do You Yahoo!?
> Get email at your own domain with Yahoo! Mail.
> http://personal.mail.yahoo.com/
--
Fernando Nasser
Red Hat - Toronto E-Mail: fnasser@redhat.com
2323 Yonge Street, Suite #300
Toronto, Ontario M4P 2C9