RE: FW: Can't build Insight with Cygwin

["Peter Rockett" <p dot rockett at sheffield dot ac dot uk>]

Spen

Is that with gcc 3.4.4 (the latest gcc version)? If so then I guess there
must be some very odd dependency somewhere that is not flagged by the
build...

Peter



> -----Original Message-----
> From: insight-owner@sourceware.org 
> [mailto:insight-owner@sourceware.org] On Behalf Of Spen
> Sent: 23 December 2005 18:57
> To: p.rockett@sheffield.ac.uk; 'insight'
> Subject: RE: FW: Can't build Insight with Cygwin
> 
> 
> I have built 6.4 both from the tar.gz release and cvs head
> 
> Regards
> Spen 
> 
> -----Original Message-----
> From: insight-owner@sourceware.org 
> [mailto:insight-owner@sourceware.org] On Behalf Of Peter Rockett
> Sent: 23 December 2005 16:25
> To: 'insight'
> Subject: RE: FW: Can't build Insight with Cygwin
> 
> Spen
> 
> Thanks but I have already run this one down. Is it definitely 
> Insight 6.4 you have built (and not any earlier version)?
> 
> Peter
> 
> 
> > -----Original Message-----
> > From: insight-owner@sourceware.org 
> > [mailto:insight-owner@sourceware.org] On Behalf Of Spen
> > Sent: 23 December 2005 16:22
> > To: wilfried.fauvel@laposte.net; 'insight'
> > Subject: RE: FW: Can't build Insight with Cygwin
> > 
> > 
> > Just to let you know that it does build under cygwin. I 
> only make one
> > patch to enable building under the follow config.
> > 
> > Cygwin: 1.5.18
> > GCC 3.4.4
> > 
> > The patch can be found here:
> > http://sourceware.org/ml/insight/2005-q3/msg00021.html
> > 
> > I did run into one build problem after updating other 
> cygwin pakages,
> > reinstalling gcc fixed the problems, could be with a try.
> > 
> > Regards
> > Spen
> > 
> > -----Original Message-----
> > From: insight-owner@sourceware.org 
> > [mailto:insight-owner@sourceware.org] On Behalf Of 
> > wilfried.fauvel@laposte.net
> > Sent: 23 December 2005 13:38
> > To: insight
> > Subject: Re:FW: Can't build Insight with Cygwin
> > 
> > Hi,
> > 
> > I think you can use the patch command
> > (http://www.gnu.org/software/patch/patch.html) with the 
> .diff file, I
> > have made it manually : you only have to open the three 
> files listed 
> > ("RCS
> > file:") in the .diff file, and replace the - lines by the + 
> lines at 
> > the corresponding patterns. I have tested to build on 
> another config 
> > (with the same cygwin version :
> > 1.5.18(0.132/4/2), and the same sources), and it seems to 
> crash still 
> > ...
> > 
> > Good luck.
> > 
> >  > Hi
> > >
> > > Thanks, Wilfred! This at least confirms my view that there did not
> > > seem to be any regular way this source could build. If I read it 
> > > right, Dave Korn has confirmed that the Win32Dll.c code
> > relies on an
> > > idiosyncrasy of an earlier version of gcc. Wilfred, can you post a
> > > patch? I have read Dave Korn's fix but as I have always 
> studiously 
> > > avoided assembler I just don't understand what to do to
> > implement it!
> > >
> > > BTW: Keith, I have used the latest cygwin download which 
> I think is
> > > gcc 3.4... (see Dave Korn's post). I am interested in 
> Insight under 
> > > Windows because I have used MSVC in the past (great 
> debugger!) but 
> > > want to migrate to gnu for cross-platform reasons. 
> There's a lot of 
> > > IDEs available for gcc but debugging support is generally
> > poor. Hence the
> > interest in Insight.
> > > Keith, I guess the cygwin compiler on your Win2K box is an old
> > > version...
> > >
> > > Finally, I tried building with mingw 3.4.4 and the 
> offending section
> > > in tcl/win seems to build OK!! But mingw breaks on the ./bfd
> > sub-directory.
> > > Output below. Any ideas on this one? This looks like something has
> > > coughed in the make file - again, I've studiously avoided
> > using make...
> > >
> > >
> > > Peter
> > >
> > > 
> > 
> ######################################################################
> > > ######
> > > #############################
> > > >
> > > > make[2]: Entering directory `/c/insight-6.4/bfd'
> > > > Making info in doc
> > > > make[3]: Entering directory `/c/insight-6.4/bfd/doc'
> > > > restore=: && backupdir=".am$$" && \ am__cwd=`pwd` && cd
> > > > ../.././bfd/doc && \ rm -rf
> > $backupdir && mkdir
> > > > $backupdir && \ for f in ../.././bfd/doc/bfd.info
> > > > ../.././bfd/doc/bfd.info-[0-9] 
> ../.././bfd/doc/bfd.info-[0-9][0-9]
> > > > ../.././bfd/doc/bfd.i[0-9]
> > ../.././bfd/doc/bfd.i[0-9][0-9]; do \ if
> > > > test -f $f; then mv $f $backupdir; restore=mv; else :;
> > fi; \ done; \
> > > > cd "$am__cwd"; \ if makeinfo --split-size=5000000
> > > > --split-size=5000000 -I ../.././bfd/doc \ -o 
> > > > ../.././bfd/doc/bfd.info ../.././bfd/doc/bfd.texinfo; \
> > then \ rc=0;
> > > > \ cd ../.././bfd/doc; \ else \ rc=$?; \ cd ../.././bfd/doc && \
> > > > $restore $backupdir/* `echo "./../.././bfd/doc/bfd.info" | sed 
> > > > 's|[^/]*$||'`; \ fi; \ rm -rf $backupdir; exit $rc section 
> > > > mapping'.ss reference to nonexistent node `mmo a New Hash Table 
> > > > Type'.ference to nonexistent node `Deriving
> > > > makeinfo: Removing output file 
> `../.././bfd/doc/bfd.info' due to 
> > > > errors; use --force to preserve.
> > > > make[3]: *** [../.././bfd/doc/bfd.info] Error 2
> > > > make[3]: Leaving directory `/c/insight-6.4/bfd/doc'
> > > > make[2]: *** [info-recursive] Error 1
> > > > make[2]: Leaving directory `/c/insight-6.4/bfd'
> > > > make[1]: *** [all-bfd] Error 2
> > > > make[1]: Leaving directory `/c/insight-6.4'
> > > > make: *** [all] Error 2
> > > >
> > > 
> > 
> > Accédez au courrier électronique de La Poste :
> > www.laposte.net ; Jusqu'au 25 décembre, participez  au grand jeu du 
> > Calendrier de l'Avent et
> > ?gagnez tous les jours de nombreux lots, + de 300 cadeaux en jeu !
> > 
> > 
> > 
> > 
> > 
> 
> 
>