This is the mail archive of the
newlib@sources.redhat.com
mailing list for the newlib project.
Re: Newbie problem building newlib-1.12.0 for i386-linux
Hi Jeff,
My development System is a P3 system which runs a 2.6.5 kernel with glibc
2.3.3.
And the newlib I need for a target with 486 prozessor, running a 2.6.6 kernel
without glibc, because of disk space.
Thanks for help
Michael
Am Montag, 9. August 2004 20:53 schrieben Sie:
> Michael,
>
> Newlib for x86 linux uses some of the system headers. What level of
> glibc and what kernel is installed on your machine?
>
> -- Jeff J.
>
> Michael Kieser wrote:
> > Thanks for your help,
> >
> > but now I get everytime the following error and I don't know how to work
> > arround.
> >
> > ...
> > gcc -I/home/doc/newlib-build/i686-pc-linux-gnu/newlib/targ-include
> > -I/home/doc/newlib-1.12.0/newlib/libc/include -DPACKAGE=\"newlib\"
> > -DVERSION=\"1.12.0\" -I.
> > -I../../../../../newlib-1.12.0/newlib/libc/search -O2 -DMB_CAPABLE -Wall
> > -D_I386MACH_ALLOW_HW_INTERRUPTS -DHAVE_FCNTL -DWANT_IO_POS_ARGS
> > -DWANT_IO_LONG_DBL -fPIC -D_I386MACH_NEED_SOTYPE_FUNCTION
> > -DMISSING_SYSCALL_NAMES -fno-builtin -O2 -g -O2 -O2 -g -O2
> > -c ../../../../../newlib-1.12.0/newlib/libc/search/hash.c -fPIC -DPIC
> > -o .libs/hash.o
> > In file included from /usr/include/linux/stat.h:57,
> > from
> > /home/doc/newlib-build/i686-pc-linux-gnu/newlib/targ-include/sys/stat.h:1
> >1, from ../../../../../newlib-1.12.0/newlib/libc/search/hash.c:44:
> > /usr/include/linux/time.h: In function `timespec_to_jiffies':
> > /usr/include/linux/time.h:197: error: `u64' undeclared (first use in this
> > function)
> > /usr/include/linux/time.h:197: error: (Each undeclared identifier is
> > reported only once
> > /usr/include/linux/time.h:197: error: for each function it appears in.)
> > /usr/include/linux/time.h:201: error: parse error before "sec"
> > /usr/include/linux/time.h:201: error: parse error before ')' token
> > /usr/include/linux/time.h: In function `jiffies_to_timespec':
> > /usr/include/linux/time.h:214: error: `u64' undeclared (first use in this
> > function)
> > /usr/include/linux/time.h:214: error: parse error before "nsec"
> > /usr/include/linux/time.h:215: error: `nsec' undeclared (first use in
> > this function)
> > /usr/include/linux/time.h: In function `timeval_to_jiffies':
> > /usr/include/linux/time.h:236: error: `u64' undeclared (first use in this
> > function)
> > /usr/include/linux/time.h:240: error: parse error before "sec"
> > /usr/include/linux/time.h:240: error: parse error before ')' token
> > /usr/include/linux/time.h: In function `jiffies_to_timeval':
> > /usr/include/linux/time.h:252: error: `u64' undeclared (first use in this
> > function)
> > /usr/include/linux/time.h:252: error: parse error before "nsec"
> > /usr/include/linux/time.h:253: error: `nsec' undeclared (first use in
> > this function)
> > make[4]: *** [hash.lo] Fehler 1
> > make[4]: Leaving directory
> > `/home/doc/newlib-build/i686-pc-linux-gnu/newlib/libc/search'
> > make[3]: *** [all-recursive] Fehler 1
> > make[3]: Leaving directory
> > `/home/doc/newlib-build/i686-pc-linux-gnu/newlib/libc'
> > make[2]: *** [all-recursive] Fehler 1
> > make[2]: Leaving directory
> > `/home/doc/newlib-build/i686-pc-linux-gnu/newlib' make[1]: ***
> > [all-recursive-am] Fehler 2
> > make[1]: Leaving directory
> > `/home/doc/newlib-build/i686-pc-linux-gnu/newlib' make: ***
> > [all-target-newlib] Fehler 2
> > doc@gateway:~/newlib-build>
> >
> > Don't know, why I can't compile simply as everywhere discribed.
> > Thanks for help
> >
> > Am Freitag, 6. August 2004 20:48 schrieben Sie:
> >>Michael,
> >>
> >> Newlib isn't the default C library for a native linux platform such as
> >>i386-linux; glibc is. To get newlib to build for linux, you have to
> >>specify the --with-newlib configuration option. I would suggest you
> >>specify your target to be i686-pc-linux-gnu if you are targetting the
> >>machine you are building with.
> >>
> >>-- Jeff J.
> >>
> >>Michael Kieser wrote:
> >>>Hi all,
> >>>
> >>>I tried to build the newlib but with or without a toolchain for
> >>>i386-linux I never can built it.
> >>>
> >>>First I extracted newlib-1.12.tar.gz -> $HOME
> >>>then created a subdirectory $HOME/newlib-build
> >>>then created a subdirectory $HOME/cross
> >>>
> >>>then cd newlib-build
> >>>then ../newlib-1.12.0/configure --prefix=$HOME/cross --target=i386-linux
> >>>
> >>>result is:
> >>>
> >>>doc@gateway:~/newlib-build> ../newlib-1.12.0/configure
> >>>--prefix=$HOME/cross --target=i386-linux
> >>>creating cache ./config.cache
> >>>checking host system type... i686-pc-linux-gnu
> >>>checking target system type... i386-pc-linux-gnu
> >>>checking build system type... i686-pc-linux-gnu
> >>>checking for a BSD compatible install... /usr/bin/install -c
> >>>*** This configuration is not supported in the following subdirectories:
> >>> target-newlib target-libgloss
> >>> (Any other directories should still work fine.)
> >>>checking for i686-pc-linux-gnu-ar... no
> >>>checking for ar... ar
> >>>checking for i686-pc-linux-gnu-as... no
> >>>checking for as... as
> >>>checking for i686-pc-linux-gnu-dlltool... no
> >>>checking for dlltool... dlltool
> >>>checking for
> >>>i686-pc-linux-gnu-ld...
> >>>/usr/lib/gcc-lib/i586-suse-linux/3.3.3/../../../../i586-suse-linux/bin/l
> >>>d checking for i686-pc-linux-gnu-nm... no
> >>>checking for nm... nm
> >>>checking for i686-pc-linux-gnu-ranlib... no
> >>>checking for ranlib... ranlib
> >>>checking for i686-pc-linux-gnu-windres... no
> >>>checking for windres... windres
> >>>checking for i686-pc-linux-gnu-objcopy... no
> >>>checking for objcopy... objcopy
> >>>checking for i686-pc-linux-gnu-objdump... no
> >>>checking for objdump... objdump
> >>>checking for i386-linux-ar... no
> >>>checking for i386-linux-as... no
> >>>checking for i386-linux-dlltool... no
> >>>checking for i386-linux-ld... no
> >>>checking for i386-linux-nm... no
> >>>checking for i386-linux-ranlib... no
> >>>checking for i386-linux-windres... no
> >>>checking whether to enable maintainer-specific portions of Makefiles...
> >>>no updating cache ./config.cache
> >>>creating ./config.status
> >>>creating Makefile
> >>>doc@gateway:~/newlib-build>
> >>>
> >>>with i386-linux toolchain there is the same result but
> >>>...
> >>>checking for i386-linux-ar... i386-linux-ar
> >>>checking for i386-linux-as... i386-linux-as
> >>>checking for i386-linux-dlltool... i386-linux-dlltool
> >>>checking for i386-linux-ld... i386-linux-ld
> >>>checking for i386-linux-nm... i386-linux-nm
> >>>checking for i386-linux-ranlib... i386-linux-ranlib
> >>>checking for i386-linux-windres... 386-linux-windres
> >>>...
> >>>
> >>>try of make all install ends up everytime with
> >>>
> >>>doc@gateway:~/newlib-build> make all install
> >>>make[1]: Entering directory `/home/doc/newlib-build/etc'
> >>>make[1]: Für das Ziel »all« ist nichts zu tun.
> >>>make[1]: Leaving directory `/home/doc/newlib-build/etc'
> >>>/bin/sh ../newlib-1.12.0/mkinstalldirs /home/doc/cross /home/doc/cross
> >>>make[1]: Entering directory `/home/doc/newlib-build/etc'
> >>>for f in standards.info configure.info; do \
> >>> if test -f ../../newlib-1.12.0/etc/`echo $f | sed -e
> >>>'s/.info$/.texi/'`; then \
> >>> if make "MAKEINFO=/home/doc/newlib-1.12.0/missing makeinfo
> >>>--split-size=5000000" $f; then \
> >>> true; \
> >>> else \
> >>> exit 1; \
> >>> fi; \
> >>> fi; \
> >>>done
> >>>make[2]: Entering directory `/home/doc/newlib-build/etc'
> >>>make[2]: »standards.info« ist bereits aktualisiert.
> >>>make[2]: Leaving directory `/home/doc/newlib-build/etc'
> >>>make[2]: Entering directory `/home/doc/newlib-build/etc'
> >>>make[2]: »configure.info« ist bereits aktualisiert.
> >>>make[2]: Leaving directory `/home/doc/newlib-build/etc'
> >>>/bin/sh ../../newlib-1.12.0/etc/../mkinstalldirs /home/doc/cross/info
> >>>if test ! -f standards.info; then cd ../../newlib-1.12.0/etc; fi; \
> >>>if test -f standards.info; then \
> >>> for i in standards.info*; do \
> >>> /usr/bin/install -c -m 644 $i /home/doc/cross/info/$i; \
> >>> done; \
> >>>fi
> >>>if test ! -f configure.info; then cd ../../newlib-1.12.0/etc; fi; \
> >>>if test -f configure.info; then \
> >>> for i in configure.info*; do \
> >>> /usr/bin/install -c -m 644 $i /home/doc/cross/info/$i; \
> >>> done; \
> >>>fi
> >>>make[1]: Leaving directory `/home/doc/newlib-build/etc'
> >>>doc@gateway:~/newlib-build>
> >>>
> >>>I don't need info files, only the newlib
> >>>can anybody help me, getting the newlib compiled ??
> >>>
> >>>Thank
> >
> > s