This is the mail archive of the pthreads-win32@sourceware.cygnus.com mailing list for the pthreas-win32 project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]

SV: [pthread-win32] pthread_cond_timedwait


Thanks Tristan,
your suggestion works just fine! I used the alternative:
GetSystemTime(&st);
SystemTimeToFileTime(&st, &ft);

I haven't been able to verify the resolution or precision yet, but I'll will in a day or so.

Regards 
Michael Ambrus

-----Ursprungligt meddelande-----
Från:	Tristan Savatier [SMTP:tristan@mpegtv.com]
Skickat:	den 9 september 1999 23:15
Till:	Mikael.Ambrus@elema.siemens.se
Kopia:	pthreads-win32@sourceware.cygnus.com
Ämne:	Re: [pthread-win32] pthread_cond_timedwait

use _ftime().

For systems where _ftime() is not available, you can use
GetSystemTime and convert it to a FILETIME with SystemTimeToFileTime.
Note: _ftime is NOT available on WinCE, so I had to do that
for the WinCE port of posix_thread...

The problem is that the posix standard uses system time defined
as number of microseconds since jan 1, 1970, whereas the windows
FILETIME is defined as the number of 100 nanosecs since jan 1,
1601!

I have written two small routines to convert between those
two:

#ifndef USE_FTIME

/* time between jan 1, 1601 and jan 1, 1970 in units of 100 nanoseconds
*/
#define TIMESPEC_TO_FILETIME_OFFSET (((LONGLONG)27111902 << 32) +
(LONGLONG)3577643008)

static void
timespec_to_filetime(const struct timespec *ts, FILETIME *ft)
     /*
      *
-------------------------------------------------------------------
	  * converts struct timespec
	  * where the time is expressed in seconds and nanoseconds from Jan 1,
1970.
	  * into FILETIME (as set by GetSystemTimeAsFileTime), where the time
is
	  * expressed in 100 nanoseconds from Jan 1, 1601,
      *
-------------------------------------------------------------------
	  */
{
	*(LONGLONG *)ft = ts->tv_sec * 10000000 + (ts->tv_nsec + 50) / 100 +
TIMESPEC_TO_FILETIME_OFFSET;
}

static void
filetime_to_timespec(const FILETIME *ft, struct timespec *ts)
     /*
      *
-------------------------------------------------------------------
	  * converts FILETIME (as set by GetSystemTimeAsFileTime), where the
time is
	  * expressed in 100 nanoseconds from Jan 1, 1601,
	  * into struct timespec
	  * where the time is expressed in seconds and nanoseconds from Jan 1,
1970.
      *
-------------------------------------------------------------------
	  */
{
	ts->tv_sec = (int)((*(LONGLONG *)ft - TIMESPEC_TO_FILETIME_OFFSET) /
10000000);
	ts->tv_nsec = (int)((*(LONGLONG *)ft - TIMESPEC_TO_FILETIME_OFFSET -
((LONGLONG)ts->tv_sec * (LONGLONG)10000000)) * 100);
}

#endif /* not USE_FTIME */

---------------------------

To get the current system time:

	  _ftime(&currSysTime);

or

	  {
	    FILETIME ft;
	    SYSTEMTIME st;

	    GetSystemTime(&st);
            SystemTimeToFileTime(&st, &ft);
	    /* GetSystemTimeAsFileTime(&ft); would be faster, but it does not
exist on WinCE */

	    filetime_to_timespec(&ft, &currSysTime);
	  }

--------------------------

I hope this helps!

-t

Mikael.Ambrus@elema.siemens.se wrote:
> 
>         [Ambrus Mikael]  Dear pthreads colleagues,
> 
>         I'm writing a program that uses pthread_cond_timedwait. In the book
> that I'm using (Pthreads Programming by Nicols, Buttlar & Proulux Farell )
> it says that this function should suspend the thread until some other thread
> calls  pthread_cond_signal, pthread_cond_broadcast OR the system timer is
> greater than or equal to the third argument (abstime).
> 
>         Since clock_gettime is not implemented and I cant find some other
> function that tells me the system time, I've tried to implement my own
> version of clock_gettime by using the ansi function clock(). This function
> returns the number of ticks that has elapsed since the program was started.
> 
>         But it seams that this is not the same absolute time that
> pthread_cond_timedwait requires since the thread won't awaken.
> 
>         Is there another way to acquire the relevant system time?
> 
>         Another thing that has bothered me is that I recently downloaded the
> latest snip of phtreads and now my read/write locks won't work. Since the
> precompiled lib isn't recognised by the linker (neither with gcc v20.1 nor
> MSVC 6.0) for some reason, I built the libs using the buildlib.bat provided.
> Here's a snip of the code that fails:
> 
>         int pthread_rdwr_wunlock_np (
>            pthread_rdwr_t *rdwrp
>         ){
>            assert( pthread_mutex_lock(&(rdwrp->mutex)) == 0 );
>            if (rdwrp->writers_writing == 0) {
>               assert( pthread_mutex_unlock(&(rdwrp->mutex)) == 0 );
>               return(-1);
>            }else{
>               rdwrp->writers_writing = 0;
>               assert(pthread_cond_broadcast(&(rdwrp->lock_free)) == 0);
> 
>            };
> 
>            assert( pthread_mutex_unlock(&(rdwrp->mutex)) == 0 );
>            return(0);
>         };
> 
>         pthread_cond_broadcast returns EINVAL. Does anyone recognise this
> problem?
> 
>         Wkr
>         Michael Ambrus
>         Siemens Elema
> >

-- 
Regards, -- Tristan Savatier (President, MpegTV LLC)

MpegTV: http://www.mpegtv.com - Xaudio: http://www.xaudio.com
MPEG.ORG: http://www.mpeg.org - Tel: (415) 864 6466

Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]