This is the mail archive of the cygwin-apps@cygwin.com mailing list for the Cygwin project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

W2K and sshd, ssh - asks for password


I checked the archives and I think from what I read there that I now understand 
that in order to run sshd on a W2k system you must also be using NTFS and 
ntsec.   If that is not correct - I would appreciate a clarification. 

I tried to configure sshd and ssh on my W2K system and I used the 
ssh-host-config and ssh-user-config scripts to set it up.  Sshd does seem to be 
starting as a daemon but when try to test using just against my Win2k machine 
it still asks me for password.  The first time I ran it I was told it was not a 
known hosts and would be added and this seemed to work and then I moved the 
known_hosts file to /etc/ssh_known_hosts.  It still works but contiunues to ask 
for my password.  As you can see in the following debug - I did an ssh to 
FPC_ATL_BKNB (my Win2k machine) with 3 -v for the most detail.  At the 
beginning you can see it does not seem to like the key with the BEGIN and END 
in it.  Maybe someone who is better at reading this than me can tell for sure 
but later it seems to be exchanging the keys but then still asks for the 
password.  Is this normal or as I said above is this because my machine is not 
using ntsec and NTFS.  

By the way it does say I am logged in - once I supply the password.

bk

/Etc
$ ssh -v -v -v FPC_ATL_BKNB
OpenSSH_3.4p1, SSH protocols 1.5/2.0, OpenSSL 0x0090604f
debug1: Reading configuration data /etc/ssh_config
debug1: Rhosts Authentication disabled, originating port will not be trusted.
debug1: ssh_connect: needpriv 0
debug1: Connecting to FPC_ATL_BKNB [192.168.60.13] port 22.
debug1: Connection established.
debug1: identity file /usr/local/briank/.ssh/identity type 0
debug3: Not a RSA1 key file /usr/local/briank/.ssh/id_rsa.
debug2: key_type_from_name: unknown key type '-----BEGIN'
debug3: key_read: no key found
debug3: key_read: no space
debug3: key_read: no space
debug3: key_read: no space
debug3: key_read: no space
debug3: key_read: no space
debug3: key_read: no space
debug3: key_read: no space
debug3: key_read: no space
debug3: key_read: no space
debug3: key_read: no space
debug3: key_read: no space
debug3: key_read: no space
debug3: key_read: no space
debug2: key_type_from_name: unknown key type '-----END'
debug3: key_read: no key found
debug1: identity file /usr/local/briank/.ssh/id_rsa type 1
debug3: Not a RSA1 key file /usr/local/briank/.ssh/id_dsa.
debug2: key_type_from_name: unknown key type '-----BEGIN'
debug3: key_read: no key found
debug3: key_read: no space
debug3: key_read: no space
debug3: key_read: no space
debug3: key_read: no space
debug3: key_read: no space
debug3: key_read: no space
debug3: key_read: no space
debug3: key_read: no space
debug3: key_read: no space
debug3: key_read: no space
debug2: key_type_from_name: unknown key type '-----END'
debug3: key_read: no key found
debug1: identity file /usr/local/briank/.ssh/id_dsa type 2
debug1: Remote protocol version 1.99, remote software version OpenSSH_3.4p1
debug1: match: OpenSSH_3.4p1 pat OpenSSH*
Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_3.4p1
debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug2: kex_parse_kexinit: 
diffie-hellman-group-exchange-sha1,diffie-hellman-gro
up1-sha1
debug2: kex_parse_kexinit: ssh-rsa,ssh-dss
debug2: kex_parse_kexinit: 
aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,
aes192-cbc,aes256-cbc,rijndael-cbc@lysator.liu.se
debug2: kex_parse_kexinit: 
aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,
aes192-cbc,aes256-cbc,rijndael-cbc@lysator.liu.se
debug2: kex_parse_kexinit: 
hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160@open
ssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: 
hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160@open
ssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none
debug2: kex_parse_kexinit: none
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: kex_parse_kexinit: 
diffie-hellman-group-exchange-sha1,diffie-hellman-gro
up1-sha1
debug2: kex_parse_kexinit: ssh-rsa,ssh-dss
debug2: kex_parse_kexinit: 
aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,
aes192-cbc,aes256-cbc,rijndael-cbc@lysator.liu.se
debug2: kex_parse_kexinit: 
aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,
aes192-cbc,aes256-cbc,rijndael-cbc@lysator.liu.se
debug2: kex_parse_kexinit: 
hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160@open
ssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: 
hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160@open
ssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: mac_init: found hmac-md5
debug1: kex: server->client aes128-cbc hmac-md5 none
debug2: mac_init: found hmac-md5
debug1: kex: client->server aes128-cbc hmac-md5 none
debug1: SSH2_MSG_KEX_DH_GEX_REQUEST sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP
debug1: dh_gen_key: priv key bits set: 126/256
debug1: bits set: 1634/3191
debug1: SSH2_MSG_KEX_DH_GEX_INIT sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY
debug3: check_host_in_hostfile: filename /usr/local/briank/.ssh/known_hosts
debug3: check_host_in_hostfile: filename /etc/ssh_known_hosts
debug3: check_host_in_hostfile: match line 1
debug3: check_host_in_hostfile: filename /usr/local/briank/.ssh/known_hosts
debug3: check_host_in_hostfile: filename /etc/ssh_known_hosts
debug3: check_host_in_hostfile: match line 1
debug1: Host 'fpc_atl_bknb' is known and matches the RSA host key.
debug1: Found key in /etc/ssh_known_hosts:1
debug1: bits set: 1552/3191
debug1: ssh_rsa_verify: signature correct
debug1: kex_derive_keys
debug1: newkeys: mode 1
debug1: SSH2_MSG_NEWKEYS sent
debug1: waiting for SSH2_MSG_NEWKEYS
debug1: newkeys: mode 0
debug1: SSH2_MSG_NEWKEYS received
debug1: done: ssh_kex2.
debug1: send SSH2_MSG_SERVICE_REQUEST
debug1: service_accept: ssh-userauth
debug1: got SSH2_MSG_SERVICE_ACCEPT
debug1: authentications that can continue: 
publickey,password,keyboard-interacti
ve
debug3: start over, passed a different list 
publickey,password,keyboard-interact
ive
debug3: preferred publickey,keyboard-interactive,password
debug3: authmethod_lookup publickey
debug3: remaining preferred: keyboard-interactive,password
debug3: authmethod_is_enabled publickey
debug1: next auth method to try is publickey
debug1: try pubkey: /usr/local/briank/.ssh/id_rsa
debug3: send_pubkey_test
debug2: we sent a publickey packet, wait for reply
debug1: input_userauth_pk_ok: pkalg ssh-rsa blen 149 lastkey 0x100b4820 hint 1
debug2: input_userauth_pk_ok: fp 
2c:8c:83:68:8c:34:49:37:b3:ad:dc:78:9a:01:b7:12

debug3: sign_and_send_pubkey
debug1: read PEM private key done: type RSA
debug1: authentications that can continue: 
publickey,password,keyboard-interacti
ve
debug1: try pubkey: /usr/local/briank/.ssh/id_dsa
debug3: send_pubkey_test
debug2: we sent a publickey packet, wait for reply
debug1: input_userauth_pk_ok: pkalg ssh-dss blen 434 lastkey 0x100b4838 hint 2
debug2: input_userauth_pk_ok: fp 
cc:38:29:e0:da:45:65:e9:aa:f0:6e:6a:b4:db:f6:90

debug3: sign_and_send_pubkey
debug1: read PEM private key done: type DSA
debug1: authentications that can continue: 
publickey,password,keyboard-interacti
ve
debug2: we did not send a packet, disable method
debug3: authmethod_lookup keyboard-interactive
debug3: remaining preferred: password
debug3: authmethod_is_enabled keyboard-interactive
debug1: next auth method to try is keyboard-interactive
debug2: userauth_kbdint
debug2: we sent a keyboard-interactive packet, wait for reply
debug1: authentications that can continue: 
publickey,password,keyboard-interacti
ve
debug3: userauth_kbdint: disable: no info_req_seen
debug2: we did not send a packet, disable method
debug3: authmethod_lookup password
debug3: remaining preferred:
debug3: authmethod_is_enabled password
debug1: next auth method to try is password
briank@fpc_atl_bknb's password:



Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]