This is the mail archive of the cygwin mailing list for the Cygwin project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

YNT: YNT: Problem on the re-compling of g77 for the increasing of MXUNIT in fio.h


Hi,
I ignored installs2 and run other steps. Except for 'spkg' steps, everything was succesfull. At this stage, it try to copy the other compiler packages between directories....
 
I installed the tar files which have executables to my system but I didn't run my example code which has big MAXUNIT (e.g. 101).
 
So, I checked the everything and I saw that libraries should be in /usr/lib directory but libraries are under the the usr\lib\gcc\i686-pc-cygwin...
 
When I move the libraries to correct place, my code started to run, succesfully.
 
Thanks for your help.
 
semih

	-----ÃzgÃn Äleti----- 
	Kimden: Gerrit P. Haase [mailto:gerrit@familiehaase.de] 
	GÃnderilmiÅ: Pzt 01.08.2005 18:27 
	Kime: Semih Ergintav; cygwin@cygwin.com 
	Bilgi: 
	Konu: Re: YNT: Problem on the re-compling of g77 for the increasing of MXUNIT in fio.h
	
	

	Semih Ergintav wrote:
	> Hi,
	> 
	> To compile g77 with 'gcc-3.4.4.1.sh',, I followed the above steps and  'install2' step gives error ( I attached the outputs. See attachments):
	> ./gcc-3.4.4-1.sh prep
	>                --OK
	>   ./gcc-3.4.4-1.sh conf 
	>                 --OK
	>   ./gcc-3.4.4-1.sh build
	>                 --OK
	>   ./gcc-3.4.4-1.sh build_gnatlib_and_tools
	>                 --No rules for this step (?)
	
	This target is only needed and available when building gnat, which is
	the Ada compiler.
	
	>   ./gcc-3.4.4-1.sh build_info
	>                 --OK
	>   ./gcc-3.4.4-1.sh check (optional)
	>                   --OK (see the attachment log file)
	>     ./gcc-3.4.4-1.sh install
	>                 --OK
	>   ./gcc-3.4.4-1.sh strip_exe
	>                 --OK
	>   ./gcc-3.4.4-1.sh install2
	>                              -ERROR (error in the install2_long.out file)
	
	[...]
	
	> + gzip -fq9 cpp.info.gz cppinternals.info.gz g77.info.gz gcc.info.gz gccinstall.info.gz gccint.info.gz jar.info.gz
	> gzip: jar.info.gz: No such file or directory
	> + STATUS=1
	> + exit 1
	
	Yes, I see, there should be some conditional depending on the packages
	which are actually compiled there are some files missing here which I
	usually have when building the full suite.
	
	You can skip this step.  Just go to the installation path after
	stripping the executables and tar it up manually.
	
	Testsuite:
	
	Go to the build directory and run `make mail-report.log` or simply
	running `../contrib/test_summary -t > test-summary.log` should work too.
	
	Then the content of *.log is the interesting part.
	
	
	Gerrit
	--
	=^..^=
	


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]