This is the mail archive of the cygwin mailing list for the Cygwin project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

ssh localhost date #fails for me, but WJFFU; report enclosed


working test case; Dec 16, was last snapshot that ran OK:

  ~ $ uname -a # *all* tests done initiated from an ssh session
  CYGWIN_NT-5.0 OurServer108 1.5.19s(0.148/4/2) 20051216 23:59:19 i686 unknown unknown Cygwin
  ~ $ echo $CYGWIN
  binmode tty ntsec smbntsec
  ~ $ ssh localhost date  # IN ALL THESE TESTS I manually type in the password next
  staffuser1@localhost's password:
  Fri Dec 23 10:07:53 CST 2005
  ~ $

The 1st snapshot that failed above test (no output from "date"),
was "20051218 23:36:53"

Example of failing test case, w/20051222 12:23:34 snapshot:

  ~ $ uname -a
  CYGWIN_NT-5.0 OurServer108 1.5.19s(0.149/4/2) 20051222 12:23:34 i686 unknown unknown Cygwin
  ~ $ echo $CYGWIN
  binmode tty ntsec smbntsec
  ~ $ ssh localhost date
  staffuser1@localhost's password:
  ~ $ : # NO OUTPUT from date is seen
  ~ $ ssh -vvv localhost date
  OpenSSH_4.2p1, OpenSSL 0.9.8a 11 Oct 2005
  debug1: Reading configuration data /etc/ssh_config
  debug2: ssh_connect: needpriv 0
  debug1: Connecting to localhost [127.0.0.1] port 22.
  debug1: Connection established.
  debug1: identity file /home/local/staffuser1/.ssh/identity type -1
  debug1: identity file /home/local/staffuser1/.ssh/id_rsa type -1
  debug1: identity file /home/local/staffuser1/.ssh/id_dsa type -1
  debug1: Remote protocol version 1.99, remote software version OpenSSH_4.2
  debug1: match: OpenSSH_4.2 pat OpenSSH*
  debug1: Enabling compatibility mode for protocol 2.0
  debug1: Local version string SSH-2.0-OpenSSH_4.2
  debug2: fd 3 setting O_NONBLOCK
  debug1: SSH2_MSG_KEXINIT sent
  debug1: SSH2_MSG_KEXINIT received
  debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1
  debug2: kex_parse_kexinit: ssh-rsa,ssh-dss
  debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes192-cbc,aes256-cbc,rijndael-cbc@lysator.liu.se,aes128-ctr,aes192-ctr,aes256-ctr
  debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes192-cbc,aes256-cbc,rijndael-cbc@lysator.liu.se,aes128-ctr,aes192-ctr,aes256-ctr
  debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96
  debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96
  debug2: kex_parse_kexinit: none,zlib@openssh.com,zlib
  debug2: kex_parse_kexinit: none,zlib@openssh.com,zlib
  debug2: kex_parse_kexinit:
  debug2: kex_parse_kexinit:
  debug2: kex_parse_kexinit: first_kex_follows 0
  debug2: kex_parse_kexinit: reserved 0
  debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1
  debug2: kex_parse_kexinit: ssh-rsa,ssh-dss
  debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes192-cbc,aes256-cbc,rijndael-cbc@lysator.liu.se,aes128-ctr,aes192-ctr,aes256-ctr
  debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes192-cbc,aes256-cbc,rijndael-cbc@lysator.liu.se,aes128-ctr,aes192-ctr,aes256-ctr
  debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96
  debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96
  debug2: kex_parse_kexinit: none,zlib@openssh.com
  debug2: kex_parse_kexinit: none,zlib@openssh.com
  debug2: kex_parse_kexinit:
  debug2: kex_parse_kexinit:
  debug2: kex_parse_kexinit: first_kex_follows 0
  debug2: kex_parse_kexinit: reserved 0
  debug2: mac_init: found hmac-md5
  debug1: kex: server->client aes128-cbc hmac-md5 none
  debug2: mac_init: found hmac-md5
  debug1: kex: client->server aes128-cbc hmac-md5 none
  debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent
  debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP
  debug2: dh_gen_key: priv key bits set: 131/256
  debug2: bits set: 514/1024
  debug1: SSH2_MSG_KEX_DH_GEX_INIT sent
  debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY
  debug3: check_host_in_hostfile: filename /home/local/staffuser1/.ssh/known_hosts
  debug3: check_host_in_hostfile: filename /etc/ssh_known_hosts
  debug3: check_host_in_hostfile: match line 7
  debug1: Host 'localhost' is known and matches the RSA host key.
  debug1: Found key in /etc/ssh_known_hosts:7
  debug2: bits set: 498/1024
  debug1: ssh_rsa_verify: signature correct
  debug2: kex_derive_keys
  debug2: set_newkeys: mode 1
  debug1: SSH2_MSG_NEWKEYS sent
  debug1: expecting SSH2_MSG_NEWKEYS
  debug2: set_newkeys: mode 0
  debug1: SSH2_MSG_NEWKEYS received
  debug1: SSH2_MSG_SERVICE_REQUEST sent
  debug2: service_accept: ssh-userauth
  debug1: SSH2_MSG_SERVICE_ACCEPT received
  debug2: key: /home/local/staffuser1/.ssh/identity (0x0)
  debug2: key: /home/local/staffuser1/.ssh/id_rsa (0x0)
  debug2: key: /home/local/staffuser1/.ssh/id_dsa (0x0)
  debug1: Authentications that can continue: publickey,password,keyboard-interactive
  debug3: start over, passed a different list publickey,password,keyboard-interactive
  debug3: preferred publickey,keyboard-interactive,password
  debug3: authmethod_lookup publickey
  debug3: remaining preferred: keyboard-interactive,password
  debug3: authmethod_is_enabled publickey
  debug1: Next authentication method: publickey
  debug1: Trying private key: /home/local/staffuser1/.ssh/identity
  debug3: no such identity: /home/local/staffuser1/.ssh/identity
  debug1: Trying private key: /home/local/staffuser1/.ssh/id_rsa
  debug3: no such identity: /home/local/staffuser1/.ssh/id_rsa
  debug1: Trying private key: /home/local/staffuser1/.ssh/id_dsa
  debug3: no such identity: /home/local/staffuser1/.ssh/id_dsa
  debug2: we did not send a packet, disable method
  debug3: authmethod_lookup keyboard-interactive
  debug3: remaining preferred: password
  debug3: authmethod_is_enabled keyboard-interactive
  debug1: Next authentication method: keyboard-interactive
  debug2: userauth_kbdint
  debug2: we sent a keyboard-interactive packet, wait for reply
  debug1: Authentications that can continue: publickey,password,keyboard-interactive
  debug3: userauth_kbdint: disable: no info_req_seen
  debug2: we did not send a packet, disable method
  debug3: authmethod_lookup password
  debug3: remaining preferred:
  debug3: authmethod_is_enabled password
  debug1: Next authentication method: password
  staffuser1@localhost's password:
  debug3: packet_send2: adding 64 (len 60 padlen 4 extra_pad 64)
  debug2: we sent a password packet, wait for reply
  debug1: Authentication succeeded (password).
  debug1: channel 0: new [client-session]
  debug3: ssh_session2_open: channel_new: 0
  debug2: channel 0: send open
  debug1: Entering interactive session.
  debug2: callback start
  debug2: client_session2_setup: id 0
  debug1: Sending command: date
  debug2: channel 0: request exec confirm 0
  debug2: callback done
  debug2: channel 0: open confirm rwindow 0 rmax 32768
  debug2: channel 0: rcvd adjust 131072
  debug1: client_input_channel_req: channel 0 rtype exit-status reply 0
  debug2: channel 0: rcvd eof
  debug2: channel 0: output open -> drain
  debug2: channel 0: obuf empty
  debug2: channel 0: close_write
  debug2: channel 0: output drain -> closed
  debug2: channel 0: rcvd close
  debug2: channel 0: close_read
  debug2: channel 0: input open -> closed
  debug3: channel 0: will not send data after close
  debug2: channel 0: almost dead
  debug2: channel 0: gc: notify user
  debug2: channel 0: gc: user detached
  debug2: channel 0: send close
  debug2: channel 0: is dead
  debug2: channel 0: garbage collecting
  debug1: channel 0: free: client-session, nchannels 1
  debug3: channel 0: status: The following connections are open:
    #0 client-session (t4 r0 i3/0 o3/0 fd -1/-1 cfd -1)

  debug3: channel 0: close_fds r -1 w -1 e 6 c -1
  debug1: Transferred: stdin 0, stdout 0, stderr 0 bytes in 0.4 seconds
  debug1: Bytes per second: stdin 0.0, stdout 0.0, stderr 0.0
  debug1: Exit status 0
  ~ $

Any suggestions?

--
thanks,
Tom Rodman

--

Attachment: cygcheck.out
Description: cygcheck -s -v -r

--
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
Problem reports:       http://cygwin.com/problems.html
Documentation:         http://cygwin.com/docs.html
FAQ:                   http://cygwin.com/faq/

Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]