This is the mail archive of the
mailing list for the Cygwin project.
Re: Serial port using USB adaptor
On Feb 29 12:43, hce wrote:
> I have a linux serial port problem compiled by Cygwin on window, it
> runs fine if it connects a 9-pin serial cable and the device name is
> /dev/ttyS0 (it does not work with com1, I have to translate it to
> /dev/ttyS0). The problem is when I run the program in a PC without a
> physical 9-pin serial port on hardware:
> (1) If there is no USB Serial adaptor connected, it still opens
> /dev/ttyS0 without any errors. Then, it sends data to that port, and
> timeout (does not work).
> (2) If I plug a USB-Serial adaptor and change the device name to
> /dev/ttyUSB0, it opens that port witout problem but cannot connect to
> the serial device.
/dev/ttyUSB0 works?!? It's no device name recognized by Cygwin, so
I assume you created a file on the disk called /dev/ttyUSB0 when
My knowledge about serial I/O is rather clumsy, but isn't there a
virtual COM port attached, or can't you attach a virtual COM port to
your USB I/O? AFAIK, you should find something like, say, COM9, which
would be available as /dev/com9 or /dev/ttyS8.
Corinna Vinschen Please, send mails regarding Cygwin to
Cygwin Project Co-Leader cygwin AT cygwin DOT com
Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
Problem reports: http://cygwin.com/problems.html