This is the mail archive of the cygwin mailing list for the Cygwin project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

Re: setup.exe 2.573.2.3 signature failure


On Fri, Jan 16, 2009 at 9:00 PM, Larry Hall (Cygwin)
<reply-to-list-only-lh@cygwin.com> wrote:
> George R Nelson wrote:
>>
>> On Fri, Jan 16, 2009 at 3:31 PM, Larry Hall (Cygwin)
>> <reply-to-list-only-lh AT cygwin DOT com> wrote:
>
>   ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> <>.  Thanks.
>
>>> George R Nelson wrote:
>>>>
>>>> As a newcomer to cygwin, my attempts to download from ctgwin.com or a
>>>> number of mirror sites all failed with signature errors. WHy do I get
>>>> this problem? The error I get is:
>>>>
>>>> Setup.ini signature http://cygwin.com/setup.bz2.sig from
>>>> http//cygwin.com failed to verify.
>>>>
>>>> I have managed to download cygwin using the setup.exe from redhat.
>>>
>>> So what were you downloading it with before?  'setup.exe' is the
>>> prescribed way to download (for installation) and/or install.  If you
>>> want a mirror, you want to use another tool but barring that,
>>> stick with 'setup.exe'.
>>
>> I downloaded setup.exe from the cygwin site - my apologies as I
>> presumed that was assumed. This failed as described with the signature
>> error.
>
> From <http://cygwin.com/>:
>
> The signature for setup.exe can be used to verify the validity of this
> binary using this public key.
>
> Sounds like your download didn't work for some reason.  Try again.
>
> See the link below for background:#

I have tried .... again and again and again. Each time I use the
setup.exe from the cygwin site it fails due to a signature error. This
is the purpose of this request - to find out why that was happening
which is why I went to Redhat to try to get a version of Cygwin I
could download!!!! See comment below.

>
> <http://www.cygwin.com/ml/cygwin-announce/2008-08/msg00001.html>
>
> I then downloaded setup.exe from the Redhat site and that
>>
>> worked on the Redhat site. The setup.exe from Cygwin did not work on
>> the Redhat site or any of the mirrors I tried.
>
> Cygwin != Red Hat.  Use Cygwin's site for Cygwin and support from this
> site.

Did I ever say Cygwin = Redhat. I think if you read carefully that I
said I downloaded Cygwin from the Redhat site (following a link on the
Cygwin home page - third link down on the left-hand column). The
Redhat site has a version of setup.exe that presumably was built from
the Cygwin setup.exe sources but customised for Redhat. From the User
Guide, chapter 2: Choosing packages there is a link to the setup.exe
home page which takes you to - oh wait -
http://sources.redhat.com/cygwin-apps/setup.html!!!!! But then maybe
you glossed over what I said.

>
>> Since I had no idea how
>> to select a site from the list of sites I had added, I wasn't able to
>> check if the Redhat setup.exe worked on other systems. It was only
>> while making this request that it occurred to me that I might be able
>> to select one from the list by highlighting it.
>
> From <http://cygwin.com/cygwin-ug-net/setup-net.html#setup-mirror>:
>
> Since there is no way of knowing from where you will be downloading Cygwin,
> you need to choose at least one mirror site. Cygwin mirrors are
> geographically distributed around the world; check the list at
> http://cygwin.com/mirrors.html to find one near you. You can select multiple
> mirrors by holding down CTRL and clicking on each one.
>
>>>> On a related topic, is there any way to change the URL for the
>>>> download? Or do you just add download sites then highlight the one you
>>>> wish to use?
>>>
>>> There are plenty of download sites in the list to choose from.  But if
>>> you want another one not listed, you can add it by typing it into the
>>> edit control below the list and clicking "Add".  Then you can select it
>>> from the list.  You can select up to 4 from the list.
>>>
>>
>> The setup.exe I downloaded had an empty download list. I added
>> cygwin.com and got the error described. I then added a mirror from the
>> list on the ctgwin site and that too produced the same error. Likewise
>> any mirror I picked from the site displayed the same signature error.
>> The Redhat setup.exe had their own site added to the list already.
>>
>>>> Finally, I am trying to build some C sources using cygwin but the
>>>> build fails as it is not finding some libraries: libsocket.a, libnsl.a
>>>> and libxnet.a. I've searched both the package lists and the installed
>>>> libraries without success. I am sure that the functions defined in
>>>> these libraries do exist in the cygwin distribution but may be in
>>>> differently named libraries. Can anybody help?
>>>
>>> Not significantly with that description.  I'd recommend reading the
>>> problem reporting guidelines and trying again if you're still having
>>> problems.  The guidelines can be found at the link below.
>>>
>>
>> I have read the submission guidlines and the installation
>> documentation as well as searching the FAQ before submitting. I could
>> find no details on the steps carried out by setup.exe or any
>> explanation of the error I was getting. I have read the relevant
>> portions of the user guide and all other links that I could follow
>> from the initial description of how to get cygwin but could find
>> nothing that described how to select a URL from the list that I had
>> created.
>
> See the User's Guide link above.  I think if you read it carefully, it's
> pretty clear that you can select from the list of mirrors.  Also, although
> 'setup.exe' does have a non-standard control for package selection that
> has been known to throw some people off, the mirrors list is a standard
> Windows list box.  So despite the User's Guide not taking you by the hand
> and walking you through the selection of a mirror in the list, generally
> speaking I think it's fairly explicit.  I'm guessing that you just glossed
> over this part and/or got confused by your attempt to use the 'setup.exe'
> you found somewhere on the Red Hat site.
>

No I did not gloss over this part or any other part of the
information. I did find it frustrating that there were so many links
to "additional" information that actually trying to get a detailed
picture was difficult. If you read the user guide then the mirror list
information is misleading. From the quote from the user guide you
make:

"Cygwin mirrors are geographically distributed around the world; check
the list at http://cygwin.com/mirrors.html to find one near you. You
can select multiple mirrors by holding down CTRL and clicking on each
one."

This can be read two ways: the intended meaning or that multiple
mirror sites from the list of mirrors can be selected to add to the
list in setup.exe. This is the meaning I took from it (adding the
copy/paste from the mirror list to the setup.exe window as a given).
The intended meaning may be obvious to you but then you have much more
experience with Cygwin than I do.

 My mistake but given that I was trying to assimilate a large amount
of information it is surely forgiveable but would have been avoided
simply by changing the second sentence above to read:

"You can select multiple mirrors from the setup.exe list by holding
down CTRL and clicking on each one."

Not really difficult and then the message is clear. I have not done
anything non-standard other than use a Redhat customised setup.exe to
get Cygwin downloaded. I reported the problem I had with setup.exe in
case it was a bug on the site in an attempt to be a "good citizen".
Believe me I spent many hours reading the Cygwin site documentation to
try to find a solution to my problem without success. In other words I
clicked on every link on every page that I felt was relevant. This is
how I ended up at the Redhat site and found a "solution".

It is clear that newcomers are unwelcome. I am a very experienced
computer professional and have downloaded and installed complex
packages for many products. In this case I found a problem when I
tried to install Cygwin from the Cygwin site, using the Cygwin
setup.exe. It reported a signature error. I tried using a different
mirror site from the mirror list with the same results. I repeated
this for a number of mirror sites all with the same results. The issue
with selecting a mirror from the setup.exe list was an annoying one as
it would start from the top and work its way down the list and it had
already dawned on me (as I said in my original submission) that
highlighting a URL before clicking next probably would do the trick -
a simple yes or no to this would have been sufficient. Instead I get
lambasted for not reading the documentation, using non-standard
installation procedures, when all I was trying to do was report a
perceived problem with the setup process and ask for an answer on
something that I had not been able to find in the documentation.

My apologies for taking up time and bandwidth. I have an installer
that works and will resolve any other issues I have with Cygwin
myself.

> --
> Larry Hall                              http://www.rfk.com
> RFK Partners, Inc.                      (508) 893-9779 - RFK Office
> 216 Dalton Rd.                          (508) 893-9889 - FAX
> Holliston, MA 01746
>
> _____________________________________________________________________
>
> A: Yes.
>> Q: Are you sure?
>>> A: Because it reverses the logical flow of conversation.
>>>> Q: Why is top posting annoying in email?
>
> --
> Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
> Problem reports:       http://cygwin.com/problems.html
> Documentation:         http://cygwin.com/docs.html
> FAQ:                   http://cygwin.com/faq/
>
>

--
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
Problem reports:       http://cygwin.com/problems.html
Documentation:         http://cygwin.com/docs.html
FAQ:                   http://cygwin.com/faq/


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]