Re: reporting per error message request for hdparm on Windows 10 Pro

[Rootless <rootless at gmail dot com>]

Data on the drive:

c:\Program Files (x86)\hdparm>hdparm -I /dev/sdb
      1 [main] hdparm 25220 find_fast_cwd: WARNING: Couldn't compute
FAST_CWD pointer.  Please report this problem to
the public mailing list cygwin@cygwin.com

/dev/sdb:

ATA device, with non-removable media
        Model Number:       ST8000DM004-2CX188
        Serial Number:      XXXXXXXXX
        Firmware Revision:  0001
Transport: Serial, ATA8-AST, SATA 1.0a, SATA II Extensions, SATA Rev 2.5
Standards:
        Used: unknown (minor revision code 0x006d)
        Supported: 10 9 8 7 6 5
        Likely used: 10
Configuration:
        Logical         max     current
        cylinders       16383   16383
        heads           16      16
        sectors/track   63      63
        --
        CHS current addressable sectors:   16514064
        LBA    user addressable sectors:  268435455
        LBA48  user addressable sectors:15628053168
        device size with M = 1024*1024:     7630885 MBytes
        device size with M = 1000*1000:     8001563 MBytes (8001 GB)
Capabilities:
        LBA, IORDY(can be disabled)
        Queue depth: 32
        Standby timer values: spec'd by Standard, no device specific minimum
        R/W multiple sector transfer: Max = 16  Current = ?
        Recommended acoustic management value: 208, current value: 208
        DMA: mdma0 mdma1 *mdma2 udma0 udma1 udma2 udma3 udma4 udma5 udma6
             Cycle time: min=120ns recommended=120ns
        PIO: pio0 pio1 pio2 pio3 pio4
             Cycle time: no flow control=120ns  IORDY flow control=120ns
Commands/features:
        Enabled Supported:
           *    SMART feature set
                Security Mode feature set
           *    Power Management feature set
           *    Write cache
           *    Look-ahead
           *    Host Protected Area feature set
           *    WRITE_BUFFER command
           *    READ_BUFFER command
           *    DOWNLOAD_MICROCODE
                Power-Up In Standby feature set
           *    SET_FEATURES required to spinup after power up
                SET_MAX security extension
           *    48-bit Address feature set
           *    Device Configuration Overlay feature set
           *    Mandatory FLUSH_CACHE
           *    FLUSH_CACHE_EXT
           *    SMART error logging
           *    SMART self-test
           *    General Purpose Logging feature set
           *    WRITE_{DMA|MULTIPLE}_FUA_EXT
           *    64-bit World wide name
           *    WRITE_UNCORRECTABLE command
           *    {READ,WRITE}_DMA_EXT_GPL commands
           *    Segmented DOWNLOAD_MICROCODE
                unknown 119[6]
           *    unknown 119[7]
           *    SATA-I signaling speed (1.5Gb/s)
           *    SATA-II signaling speed (3.0Gb/s)
           *    unknown 76[3]
           *    Native Command Queueing (NCQ)
           *    Host-initiated interface power management
           *    Phy event counters
           *    unknown 76[15]
                DMA Setup Auto-Activate optimization
                Device-initiated interface power management
           *    Software settings preservation
                unknown 78[7]
           *    SMART Command Transport (SCT) feature set
           *    SCT LBA Segment Access (AC2)
           *    SCT Data Tables (AC5)
                unknown 206[7]
                unknown 206[12]
                unknown 206[13]
Security:
        Master password revision code = 65534
                supported
        not     enabled
        not     locked
                frozen
        not     expired: security count
                supported: enhanced erase
        468min for SECURITY ERASE UNIT. 468min for ENHANCED SECURITY ERASE
UNIT.
Checksum: correct

c:\Program Files (x86)\hdparm>

On Fri, Feb 22, 2019 at 11:31 PM <cygwinautoreply@sourceware.org> wrote:

> >c:\Program Files (x86)\hdparm>hdparm -Z /dev/sdb
> >      0 [main] hdparm 19868 find_fast_cwd: WARNING: Couldn't compute
> >FAST_CWD pointer.  Please report this problem to
> >the public mailing list cygwin@cygwin.com
>
> >/dev/sdb:
> > disabling Seagate auto powersaving mode
> > HDIO_DRIVE_CMD(seagatepwrsave) failed: Input/Output error
>
> >c:\Program Files (x86)\hdparm>
>
>
>
> >--=20
> >James Fowler/=E6=96=B9=E5=BF=97=E5=AE=87
> >santiago@myazcomputerguy.com
> >rootless@gmail.com
> >Public Key:
> >
> https://sites.google.com/site/poorpermissions/pk/fowler_publickey?attredire=
> >cts=3D0&d=3D1
> ><http://rootless.googlepages.com/fowler_publickey>
>
>
> https://cygwin.com/faq.html#faq.using.fixing-find_fast_cwd-warnings
>


-- 
James Fowler/方志宇
santiago@myazcomputerguy.com
rootless@gmail.com
Public Key:
https://sites.google.com/site/poorpermissions/pk/fowler_publickey?attredirects=0&d=1
<http://rootless.googlepages.com/fowler_publickey>

--
Problem reports:       http://cygwin.com/problems.html
FAQ:                   http://cygwin.com/faq/
Documentation:         http://cygwin.com/docs.html
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple