[ECOS] Problem using SMC1 on 860 platform

[Rick Davis]

Gary,
	Looks like that fixed it!!!

	Thanks,
	Rick Davis


-----Original Message-----
From: Gary Thomas [mailto:gary@mlbassoc.com]
Sent: Monday, October 13, 2003 11:40 AM
To: Rick Davis
Cc: eCos Discussion
Subject: Re: [ECOS] Problem using SMC1 on 860 platform


On Wed, 2003-10-08 at 13:43, Gary Thomas wrote:
> On Tue, 2003-10-07 at 19:31, Rick Davis wrote:
> > I am trying to use SMC1 for both the diagnostic port and the stdio port.
> > Right now Redboot works fine. When I build an eCos app just using SMC1
as
> > the diagnostic port and I DO NOT enable the SMC1 hardware driver, my
> > application boots. If I enable the SMC1 hardware driver, the app hangs
up
> > just after the eCos startup initialization code initializes /dev/ser1,
which
> > is SMC1.
> >
>
> This is a known problem (BUG #90391).  I've just spent about 15 hours(!)
> looking for it, to no avail.  For now, the only thing I can say is don't
> enable the SMC1 driver.
>

I've just checked in a patch which fixes this for me.  Please let
me know if you still have problems.

--
Gary Thomas <gary@mlbassoc.com>
MLB Associates




-- 
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss