[setup] branch master, updated. release_2.870-4-g29310e2
jturney@sourceware.org
jturney@sourceware.org
Tue Mar 3 12:55:00 GMT 2015
https://sourceware.org/git/gitweb.cgi?p=cygwin-setup.git;h=29310e2862abd71b8b107e6232b0edee6ec03a70
commit 29310e2862abd71b8b107e6232b0edee6ec03a70
Author: Jon TURNEY <jon.turney@dronecode.org.uk>
Date: Mon Mar 2 13:35:40 2015 +0000
Remove msg() from LogFile::endEntry()
Every single line of log output is written to OutputDebugString() using msg().
This makes setup run quite slowly under a debugger. If you have stdout
connected to the terminal where your debugger is running (e.g. 'gdb setup'),
this output is duplicated.
Future work: there are some other uses of msg() to report real errors. At the
moment, these are completely invisible unless you are running setup under a
debugger. These should be converted to use the logger.
ChangeLog:
2015-03-02 Jon TURNEY <jon.turney@dronecode.org.uk>
* LogFile.cc (endEntry): Remove msg().
https://sourceware.org/git/gitweb.cgi?p=cygwin-setup.git;h=9d350b6dc7084262c3278e016397bcd169049513
commit 9d350b6dc7084262c3278e016397bcd169049513
Author: Jon TURNEY <jon.turney@dronecode.org.uk>
Date: Mon Mar 2 12:10:28 2015 +0000
Don't write LOG_BABBLE output to stdout
It somewhat hampers the use of setup as a command line tool that it writes
everything to stdout. Don't write LOG_BABBLE output to stdout. Add '--verbose'
flag to restore the previous behaviour.
ChangeLog:
2015-03-02 Jon TURNEY <jon.turney@dronecode.org.uk>
* LogFile.cc (VerboseOutput): Add option.
(endEntry): Only write LOG_PLAIN to stdout, unless VerboseOutput.
https://sourceware.org/git/gitweb.cgi?p=cygwin-setup.git;h=acd64421a886d61cc90301c92e712383292e62a8
commit acd64421a886d61cc90301c92e712383292e62a8
Author: Jon TURNEY <jon.turney@dronecode.org.uk>
Date: Sun Mar 1 17:41:49 2015 +0000
Add a 'Retry' button to the IDD_FILE_INUSE dialog
I have been meaning to add this for a while, and was reminded of this by [1],
although that is really about a different problem.
[1] https://cygwin.com/ml/cygwin/2015-02/msg00679.html
Add a 'Retry' button to the IDD_FILE_INUSE dialog, to press when you want to
manually stop the processes which were preventing a file from being replaced,
after you have done so.
Unfortunately the IDD_FILE_INUSE DIALOG is already rather cramped, so define
SETUP_MEDIUM_DIALOG_DIMS for a medium-size dialog, and adjust the dialog layout
appropriately.
Also do a bit of polish on the text used: "you will need to reboot" -> "the file
will be updated after a reboot"
XXX: This text should be dynamic, and should not appear if the NoReplaceOnReboot
option has been used.
Also spread out the text in the fallback MessageBox used when we can't enumerate
the processes which have the file in-use.
XXX: Note that there is no user notification, only a log message, if scheduling
a file to be replaced on reboot failed.
ChangeLog:
2015-03-02 Jon TURNEY <jon.turney@dronecode.org.uk>
* res.rc (IDD_FILE_INUSE): Add 'Retry' button. Make larger.
* install.cc (FileInuseDlgProc): Polish text. Handle IDIGNORE.
(installOne): Ditto.
https://sourceware.org/git/gitweb.cgi?p=cygwin-setup.git;h=23761198f34b613c8e9fa67a5b250429276a763f
commit 23761198f34b613c8e9fa67a5b250429276a763f
Author: Jon TURNEY <jon.turney@dronecode.org.uk>
Date: Sun Mar 1 14:54:03 2015 +0000
Fix truncation of "Bin?" and "Src?" column headers
It seems that the the "Bin?" and "Src? columns in the PickView are usually not
quite wide enough, and display truncated with an ellipsis, e.g. 'B...' and
'S...', which is completely unintelligible.
Try to more correctly size these colums. 3*GetSystemMetrics(SM_CXEDGE) seems to
be documented as the default value for the margin of a header control, so text
length + twice that is the minimum header width needed.
ChangeLog:
2015-03-02 Jon TURNEY <jon.turney@dronecode.org.uk>
* PickView.cc (init_headers): More correctly size "Bin?" and
"Src?" columns.
Diff:
---
ChangeLog | 20 ++++++++++++++++++++
LogFile.cc | 9 +++++++--
PickView.cc | 16 +++++++++-------
install.cc | 22 ++++++++++++++--------
res.rc | 25 +++++++++++++++----------
5 files changed, 65 insertions(+), 27 deletions(-)
diff --git a/ChangeLog b/ChangeLog
index bc6dd6d..551cc94 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,3 +1,23 @@
+2015-03-02 Jon TURNEY <jon.turney@dronecode.org.uk>
+
+ * LogFile.cc (endEntry): Remove msg().
+
+2015-03-02 Jon TURNEY <jon.turney@dronecode.org.uk>
+
+ * LogFile.cc (VerboseOutput): Add option.
+ (endEntry): Only write LOG_PLAIN to stdout, unless VerboseOutput.
+
+2015-03-02 Jon TURNEY <jon.turney@dronecode.org.uk>
+
+ * res.rc (IDD_FILE_INUSE): Add 'Retry' button. Make larger.
+ * install.cc (FileInuseDlgProc): Polish text. Handle IDIGNORE.
+ (installOne): Ditto.
+
+2015-03-02 Jon TURNEY <jon.turney@dronecode.org.uk>
+
+ * PickView.cc (init_headers): More correctly size "Bin?" and
+ "Src?" columns.
+
2015-02-18 Corinna Vinschen <corinna@vinschen.de>
* PickPackageLine.cc (PickPackageLine::click): Call
diff --git a/LogFile.cc b/LogFile.cc
index dfb9622..69bf70b 100644
--- a/LogFile.cc
+++ b/LogFile.cc
@@ -36,6 +36,10 @@ static const char *cvsid =
#include "AntiVirus.h"
#include "filemanip.h"
#include "String++.h"
+#include "getopt++/BoolOption.h"
+
+static BoolOption VerboseOutput (false, 'v', "verbose",
+ "Verbose output");
using namespace std;
@@ -219,7 +223,9 @@ LogFile::endEntry()
string buf = theStream->str();
delete theStream;
- cout << buf << endl;
+ /* also write to stdout */
+ if ((currEnt->level >= LOG_PLAIN) || VerboseOutput)
+ cout << buf << endl;
if (!currEnt)
{
@@ -242,7 +248,6 @@ LogFile::endEntry()
* non-0 memory on alloc
*/
currEnt->msg += buf;
- msg ("LOG: %d %s", currEnt->level, buf.c_str());
/* reset for next use */
theStream = new std::stringbuf;
diff --git a/PickView.cc b/PickView.cc
index 00a3c3a..4630ee9 100644
--- a/PickView.cc
+++ b/PickView.cc
@@ -441,13 +441,15 @@ PickView::init_headers (HDC dc)
headers[i].x = 0;
}
- // accomodate widths of the 'bin' and 'src' checkbox columns
- // FIXME: What's up with the "0"? It's probably a mistake, and should be
- // "". It used to be written as 0, and was subject to a bizarre implicit
- // conversion by the unwise String(int) constructor.
- note_width (headers, dc, "0", HMARGIN + 11, bintick_col);
- note_width (headers, dc, "0", HMARGIN + 11, srctick_col);
-
+ // A margin of 3*GetSystemMetrics(SM_CXEDGE) is used at each side of the
+ // header text. (Probably should use that rather than hard-coding HMARGIN
+ // everywhere)
+ int addend = 2*3*GetSystemMetrics(SM_CXEDGE);
+
+ // accommodate widths of the 'bin' and 'src' checkbox columns
+ note_width (headers, dc, headers[bintick_col].text, addend, bintick_col);
+ note_width (headers, dc, headers[srctick_col].text, addend, srctick_col);
+
// accomodate the width of each category name
packagedb db;
for (packagedb::categoriesType::iterator n = packagedb::categories.begin();
diff --git a/install.cc b/install.cc
index 2162902..aa7c2e9 100644
--- a/install.cc
+++ b/install.cc
@@ -261,16 +261,18 @@ FileInuseDlgProc (HWND hwndDlg, UINT uMsg, WPARAM wParam, LPARAM lParam)
case 1:
SetDlgItemText (hwndDlg, IDRETRY, "&Kill Processes");
SetDlgItemText (hwndDlg, IDC_FILE_INUSE_HELP,
- "Select 'Kill' to kill Cygwin processes and retry, or "
- "select 'Continue' to go on anyway (you will need to reboot).");
+ "Select 'Retry' to retry, "
+ "Select 'Kill' to kill processes and retry, or "
+ "select 'Continue' to go on anyway (the file will be updated after a reboot).");
break;
default:
case 2:
SetDlgItemText (hwndDlg, IDRETRY, "&Kill Processes");
SetDlgItemText (hwndDlg, IDC_FILE_INUSE_HELP,
- "Select 'Kill' to forcibly kill all processes and retry, or "
- "select 'Continue' to go on anyway (you will need to reboot).");
+ "Select 'Retry' to retry, "
+ "select 'Kill' to forcibly kill all processes and retry, or "
+ "select 'Continue' to go on anyway (the file will be updated after a reboot).");
}
}
return TRUE; // automatically set focus, please
@@ -280,6 +282,7 @@ FileInuseDlgProc (HWND hwndDlg, UINT uMsg, WPARAM wParam, LPARAM lParam)
{
switch (LOWORD (wParam))
{
+ case IDIGNORE:
case IDRETRY:
case IDCONTINUE:
EndDialog (hwndDlg, LOWORD (wParam));
@@ -543,10 +546,10 @@ Installer::installOne (packagemeta &pkgm, const packageversion &ver,
// to fix the problem themselves
char msg[fn.size() + 300];
sprintf (msg,
- "Unable to extract /%s\r\n"
- "The file is in use or some other error occurred.\r\n"
- "Please stop all Cygwin processes and select \"Retry\", or\r\n"
- "select \"Continue\" to go on anyway (you will need to reboot).\r\n",
+ "Unable to extract /%s\r\n\r\n"
+ "The file is in use or some other error occurred.\r\n\r\n"
+ "Please stop all Cygwin processes and select \"Retry\", or "
+ "select \"Continue\" to go on anyway (the file will be updated after a reboot).\r\n",
fn.c_str());
rc = MessageBox (owner, msg, "Error writing file",
@@ -556,6 +559,9 @@ Installer::installOne (packagemeta &pkgm, const packageversion &ver,
switch (rc)
{
+ case IDIGNORE:
+ // manual intervention may have fixed the problem, retry
+ continue;
case IDRETRY:
if (!processes.empty())
{
diff --git a/res.rc b/res.rc
index 9339b53..5013b31 100644
--- a/res.rc
+++ b/res.rc
@@ -3,10 +3,13 @@
#define SETUP_STANDARD_DIALOG_W 339
#define SETUP_STANDARD_DIALOG_H 179
+#define SETUP_MEDIUM_DIALOG_W 277
+#define SETUP_MEDIUM_DIALOG_H 137
#define SETUP_SMALL_DIALOG_W 215
#define SETUP_SMALL_DIALOG_H 95
#define SETUP_STANDARD_DIALOG_DIMS SETUP_STANDARD_DIALOG_W, SETUP_STANDARD_DIALOG_H
+#define SETUP_MEDIUM_DIALOG_DIMS SETUP_MEDIUM_DIALOG_W, SETUP_MEDIUM_DIALOG_H
#define SETUP_SMALL_DIALOG_DIMS SETUP_SMALL_DIALOG_W, SETUP_SMALL_DIALOG_H
#define SETUP_HEADICON_X (SETUP_STANDARD_DIALOG_W - 27)
@@ -428,24 +431,26 @@ BEGIN
END
-IDD_FILE_INUSE DIALOG DISCARDABLE 0, 0, SETUP_SMALL_DIALOG_DIMS
+IDD_FILE_INUSE DIALOG DISCARDABLE 0, 0, SETUP_MEDIUM_DIALOG_DIMS
STYLE DS_MODALFRAME | DS_CENTER | WS_POPUP | WS_CAPTION
CAPTION "In-use file detected"
FONT 8, "MS Shell Dlg"
BEGIN
- ICON IDI_WARNING,IDC_HEADICON,5,5
+ ICON IDI_WARNING,IDC_HEADICON,10,10
LTEXT "Unable to extract %s",
- IDC_FILE_INUSE_MSG,27,5,183,8,SS_PATHELLIPSIS
+ IDC_FILE_INUSE_MSG,33,10,234,8,SS_PATHELLIPSIS
LTEXT "The file is in use by the following processes:",
- IDC_STATIC,27,14,183,8
- EDITTEXT IDC_FILE_INUSE_EDIT,27,23,183,28,WS_VSCROLL |
+ IDC_STATIC,33,28,234,8
+ EDITTEXT IDC_FILE_INUSE_EDIT,33,40,234,32,WS_VSCROLL |
ES_LEFT | ES_MULTILINE | ES_READONLY |
ES_AUTOVSCROLL | NOT WS_TABSTOP
- LTEXT "Select 'Stop' to stop Cygwin processes and retry, or "
- "select 'Continue' to go on anyway (you will need to reboot).",
- IDC_FILE_INUSE_HELP,27,52,183,16,NOT WS_GROUP
- DEFPUSHBUTTON "&Stop Processes",IDRETRY,47,75,55,15
- PUSHBUTTON "&Continue",IDCONTINUE,113,75,55,15
+ LTEXT "Select 'Retry' to retry, "
+ "select 'Stop' to stop processes and retry, or "
+ "select 'Continue' to go on anyway (the file will be updated after a reboot).",
+ IDC_FILE_INUSE_HELP,33,80,234,24,NOT WS_GROUP
+ PUSHBUTTON "&Retry",IDIGNORE,45,112,55,15
+ DEFPUSHBUTTON "&Stop Processes",IDRETRY,111,112,55,15
+ PUSHBUTTON "&Continue",IDCONTINUE,177,112,55,15
END
/////////////////////////////////////////////////////////////////////////////
More information about the Cygwin-apps-cvs
mailing list