Do I have to mount ClearCase's view ?

[Alexei Karpov]

Hi,
    Of course.
-- GNUmakefile file :
export AR := Y:/aaa
include $(AR)/Make/cong.make
-- Y:/aaa/Make/conf.make file ( $(AR)/Make/conf.make )
include $(AR)/Make/init.make
include $(AR)/Make/pl.make
.
.
.
MC = $(AR)/Make/Collect
 
    Ok, when I use this code I get next error : "missing
separator. Stop."
This error takes place in line which contains echo command. I know
it is
correct line and if I delete string MC = $(AR)/Make/Collect this
error has disappeared, but I need this line because I use the var.
    If I assign to AR := //Y/aaa I have next error:
SD := $(AR)/src
.
.
.
depend :
    echo Something output
    cd $(SD) #-- Here make process has failed.
I get next message :
cd: lstat /Y failed
make: *** [depend] Error 1
 
    Ok, I try to mount Y: as /y and assign AR := /y/aaa,
but include commands in /y/aaa/config.make have failed.
I get : "No such file or directory". But I can see contents of
included files using cat command :
( f.e. ) cat /y/aaa/init.make.
Do You Have any ideas ?
        Regards,
 
Stephen Vance wrote:
Alexei --
    Could you provide some more information, such as
part of your
makefile?  I have been using Cygwin with ClearCase with no problems
for
some time.  Other than some caution relating to ':'s in target
path
names (I only use relative paths for targets), there has been little
issue.
Alexei Karpov wrote:
>  Hi,
>
>     I have problem when I use clearcase's view.
> There are a lot of sources under ClearCase and I must
> create loadable image using make utility. I have my
> view and work with it as with disk. I implement next string :
>
>     A := //Y/aaaa/bbbbb
>
> where //Y - my view mapped to disk Y:.
>       /aaaa/bbbbb - dir. in the view.
>
> When I used this var. in my makefile make did not
> do cd command. I replaced A to Y:/aaaa/bbbbb last
> error has disappeared but next command have not
> worked :
>
>     include $(A)/sss/ddd
>
> I do not know why it takes place. May be I have to mount
> this view( disk ) using mount command ? May be anybody
> had similar situation ?
>
>     Regards,
>
> --
> Alexei Karpov
> SONY Platform Software Development Center - Belgium ( PSDC- B )
> Sint Stevens Woluwestraat 55 ( Rue de Woluwe-Saint-Etienne )
> 1130 Brussel ( Bruxelles ), Belgium, Europe, Earth
> Tel.  : +32 2 724.86.50
> Fax   : +32 2 726.26.86
> E-mail: Alexei.Karpov@sonycom.com
>
> " There is no future or freedom in the circumscribed life and
>   the only other life is complete rejection of the rules...
"
>
>   - For help on using this list (especially unsubscribing),
send a
> message to "gnu-win32-request@cygnus.com" with one line of text:
> "help".
--
Stephen Vance                          
|  http://www.deneb.com
Deneb Robotics, Inc.                   
|  mailto:vance@deneb.com
5500 New King Street                   
|  Phone: (248) 267-9696
Troy, MI 48098-2615                    
|  Fax:   (248) 267-8585
What is done well is done quickly enough. -Augustus Caesar

-- 
Alexei Karpov
SONY Platform Software Development Center - Belgium ( PSDC- B )
Sint Stevens Woluwestraat 55 ( Rue de Woluwe-Saint-Etienne )
1130 Brussel ( Bruxelles ), Belgium, Europe, Earth
Tel.  : +32 2 724.86.50
Fax   : +32 2 726.26.86
E-mail: Alexei.Karpov@sonycom.com

" There is no future or freedom in the circumscribed life and
  the only other life is complete rejection of the rules... "
 

-
For help on using this list (especially unsubscribing), send a message to
"gnu-win32-request@cygnus.com" with one line of text: "help".