cygwin1 troubles
Adam Shepard
adam@peacefultimes.com
Fri Dec 17 14:05:00 GMT 1999
Hi,
ÃÂ
I'm trying to use
cygwin1 with tape/tar support with a SCSI Quantum DLT tape drive running under
NT 4.0.
ÃÂ
tar tvf
/dev/rmt0
ÃÂ
will list
theÃÂ contents of the tape (a tar archive), but when I try to extract or list
specific file names, as in
ÃÂ
tar xvf /dev/rmt0
file1.bz2
tar tvf /dev/rmt0
file1.bz2
ÃÂ
for files that are
on the tape, the tape just reads to eot and then rewinds.
ÃÂ
output of mount
is:
ÃÂ
DeviceÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ
DirectoryÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ
TypeÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ
Flags tape0ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ
tapeÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ
nativeÃÂ ÃÂ ÃÂ ÃÂ ÃÂ
text!=binary Tape0ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ
/tape0ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ
nativeÃÂ ÃÂ ÃÂ ÃÂ ÃÂ
text!=binary tape0ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ
/mnt/tapeÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ
nativeÃÂ ÃÂ ÃÂ ÃÂ ÃÂ text!=binary \\.\tape0 ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ
/dev/rmt0ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ
nativeÃÂ ÃÂ ÃÂ ÃÂ ÃÂ
text=binary d:ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ
/dÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ
nativeÃÂ ÃÂ ÃÂ ÃÂ ÃÂ
text!=binary c:ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ
/cÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ
nativeÃÂ ÃÂ ÃÂ ÃÂ ÃÂ
text!=binary C:ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ
/ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ
nativeÃÂ ÃÂ ÃÂ ÃÂ ÃÂ text!=binary
ÃÂ
Any ideas as to what
I can do to get the files off this tape?
ÃÂ
Thanks.
ÃÂ
Adam
More information about the Cygwin
mailing list