Problem with sshd on WindMill

[CyberZombie]

>I don't think so, the output of sshd still contained the following line:
>
>  debug1: Attempting authentication for illegal user k02189.

Hmm...my bad then.  I have the sshd machine on hand (laptop) and have have
the latest output based on use k02189@I23TP777 which I will provide below.
I'll also try duplicating the behavior on the one box.


-------------- next part --------------
debug1: sshd version OpenSSH_2.3.0p1
debug1: Seeding random number generator
debug1: read DSA private key done
debug1: Seeding random number generator
debug1: Bind to port 80 on 0.0.0.0.
Server listening on 0.0.0.0 port 80.
Generating 768 bit RSA key.
debug1: Seeding random number generator
debug1: Seeding random number generator
RSA key generation complete.
debug1: Server will not fork when running in debugging mode.
Connection from 168.135.22.40 port 1082
debug1: Client protocol version 2.0; client software version OpenSSH_2.3.0p1
debug1: no match: OpenSSH_2.3.0p1
Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-1.99-OpenSSH_2.3.0p1
debug1: send KEXINIT
debug1: done
debug1: wait KEXINIT
debug1: got kexinit: diffie-hellman-group-exchange-sha1,diffie-hellman-group1-sha1
debug1: got kexinit: ssh-dss
debug1: got kexinit: 3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes128-cbc,aes192-cbc,aes256-cbc,rijndael128-cbc,rijndael192-cbc,rijndael256-cbc,rijndael-cbc@lysator.liu.se
debug1: got kexinit: 3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes128-cbc,aes192-cbc,aes256-cbc,rijndael128-cbc,rijndael192-cbc,rijndael256-cbc,rijndael-cbc@lysator.liu.se
debug1: got kexinit: hmac-sha1,hmac-md5,hmac-ripemd160@openssh.com
debug1: got kexinit: hmac-sha1,hmac-md5,hmac-ripemd160@openssh.com
debug1: got kexinit: zlib
debug1: got kexinit: zlib
debug1: got kexinit: 
debug1: got kexinit: 
debug1: first kex follow: 0 
debug1: reserved: 0 
debug1: done
debug1: kex: client->server 3des-cbc hmac-sha1 zlib
debug1: kex: server->client 3des-cbc hmac-sha1 zlib
debug1: Wait SSH2_MSG_KEX_DH_GEX_REQUEST.
WARNING: no primes in /etc/primes, using old prime
debug1: bits set: 514/1024
debug1: Sending SSH2_MSG_KEX_DH_GEX_GROUP.
debug1: Wait SSH2_MSG_KEX_DH_GEX_INIT.
debug1: bits set: 494/1024
debug1: sig size 20 20
debug1: send SSH2_MSG_NEWKEYS.
debug1: Enabling compression at level 6.
debug1: done: send SSH2_MSG_NEWKEYS.
debug1: Wait SSH2_MSG_NEWKEYS.
debug1: GOT SSH2_MSG_NEWKEYS.
debug1: done: KEX2.
debug1: userauth-request for user k02189@I23TP777 service ssh-connection method none
debug1: attempt #1
Failed none for k02189@I23TP777 from 168.135.22.40 port 1082 ssh2
Connection closed by 168.135.22.40
debug1: Calling cleanup 0x4149e4(0x0)
debug1: compress outgoing: raw data 32, compressed 37, factor 1.16
debug1: compress incoming: raw data 63, compressed 64, factor 1.02